Peerless-AV LCT-203 Guide

Max Load Capacity: 22.5 lb (10.2 kg) per arm

Installation and Assembly:

Dual-Screen Desktop Mount for 17" to 24" Displays

Models: LCT-203

ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com

2 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

NOTE: Read entire instruction sheet before you start installation and assembly.

Table of Contents

Parts List.................................................................................................................................................................................3

Attaching VESA Plates to Display ..........................................................................................................................................4

Assembling base....................................................................................................................................................................5

Tool Needed for Assembly

• 6mm allen wrench

• phillips screwdriver

• Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US

customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact

your local distributor.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached

hardware and components.

• Never exceed the Maximum Load Capacity. See page one.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws ﬁrmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

WARNING

3 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

Parts may appear slightly different than illustrated.

Before you begin, make sure all parts shown are included with your product.

Description Qty. Part #

ADual arm assembly 1 125-5357

BVESA plate 2 125-5358

Carm cover 2 125-5360

Dbase 1 125-5359

EM10 flat head socket cap screw 1 520-1743

FM10 nut 1 520-1733

GM10 split lock washer 1 520-1734

HM10 flat washer 1 520-1735

IM4 x 16mm phillips screw 8 520-1736

JM4 lock washer 8 520-1737

KM4 flat washer 8 520-1738

LM6 x 16mm socket head cap screw 2 520-1739

MM6 flat washer 2 520-1741

N5mm allen wrench 1 560-9737

Oopen end wrench 1 560-9735

Prubber feet 5 560-9736

Q#6 self-tapping screws 3 520-1742

Parts list

EFGH

IJK LM N

Fasteners and tools are located inside dual arm

assembly (A).

Slide off arm covers (C) then remove back cover of

dual arm assembly.

BACK COVER

4 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

Attaching VESA Plates to Display

To prevent scratching the display, set a cloth on a ﬂat, level surface that will support the weight of the screen. Place

display face side down. If display has knobs on the back, remove them to allow the VESA plates to be attached.

Tighten tilt adjustment screw to increase tension on VESA plate ball joint shown in detail 1.

Choose hole pattern as shown in detail 2.

Place VESA plates (B) on back of display. Attach VESA plates (B) to display using four M4 phillips screws (I), four

M4 lock washers (J), and four M4 ﬂat washers (K) as shown in ﬁgure 2.1.

• Tighten screws so VESA plates are ﬁrmly attached. Do not tighten with excessive force. Overtightening can cause

stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become

detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.

• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly

secured, damage may occur to screen or product may fail.

WARNING

DETAIL 2

DETAIL 1

ﬁg 2.1

TILTADJUSTMENT

SCREW

5 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

Attach base (D) to arm assembly (A) using one M10

ﬂat head screw (E), one M10 ﬂat washer (H), one

M10 split lock washer (G), and one M10 hex nut (F).

Apply rubber feet (P) to bottom of base.

Position cables in cavity of dual arm assembly.

NOTE: Be sure connectors are in their proper

orientation. Allow enough cable slack to connect to

display.

Reattach back cover onto dual arm assembly.

NOTE: Be sure all cables are free from interference

and do not pinch power cables with back cover.

Attach VESA plates to dual arm assembly (A)

using one M6 socket head screw (L) and one M6

ﬂat washer (M) per arm as shown below. Tighten

fasteners using 5 mm allen wrench (N).

5 6

CABLES

BACK

COVER

6 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

All other brand and product names are trademarks or registered trademarks of their respective owners.

Peerless Industries, Inc.

2300 White Oak Circle

Aurora, Il 60502

www.peerless-av.com

Secure back cover to dual arm assembly (A) with

three #6 self-tapping screws (Q). Slide two arm covers (C) onto dual arm

assembly (A).

7 8

7 of 7 ISSUED: 04-24-12 SHEET #: 090-9209-2 05-31-12

Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal

use, for a period of ﬁve years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture).

At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.

In no event shall the duration of any implied warranty of merchantability or ﬁtness for a particular purpose be longer than the period of the applicable

express warranty set forth above. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless,

(b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow Peerless’ instructions or warnings when installing,

using or storing the product, or (d) misuse or accident, in transit or otherwise, including in cases of third party actions and force majeure.

In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product, whether or not secured

by a security device which may be included with the Peerless® product. Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you.

This warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No dealer, distributor, installer or other

person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in connection with the sale of any Peerless® product.

This warranty gives speciﬁc legal rights, and you may also have other rights which vary from state to state.

LIMITED FIVE-YEAR WARRANTY

www.peerless-av.com

Table of contents

Other peerless-AV Rack & Stand manuals

peerless-AV

peerless-AV Paramount PP740 Guide

peerless-AV

peerless-AV SS560F User manual

peerless-AV

peerless-AV KLR62232 User manual

peerless-AV

peerless-AV SF650-S User manual

peerless-AV

peerless-AV SMARTMOUNT WSP756 User manual

peerless-AV

peerless-AV MOD-CPF2 User manual

peerless-AV

peerless-AV DS-LEDLSAA-5X5 User manual

peerless-AV

peerless-AV SmartMount SF640-HUB2 User manual

peerless-AV

peerless-AV EST655P User manual

peerless-AV

peerless-AV PLCM-1 User manual

peerless-AV

peerless-AV HA747PU User manual

peerless-AV

peerless-AV SR598ML3E User manual

peerless-AV

peerless-AV SUT670P User manual

peerless-AV

peerless-AV MOD-AWM2 User manual

peerless-AV

peerless-AV KIL740-EUK User manual

peerless-AV

peerless-AV PR560M User manual

peerless-AV

peerless-AV SUA751PU User manual

peerless-AV

peerless-AV MOD-FPSKIT100-B User manual

peerless-AV

peerless-AV SA740P User manual

peerless-AV

peerless-AV CM50 Guide

peerless-AV

peerless-AV SMARTMOUNT SF650 User manual

peerless-AV

peerless-AV DS-LEDIF Series User manual

peerless-AV

peerless-AV PTM200 Guide

peerless-AV

peerless-AV ACSBR2 User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

peerless-AV LCT-203 Guide

Popular Rack & Stand manuals by other brands