PayFacto AMP 8200 Quick guide
AMP 8200
Configuration and Setup Guide
April, 2022
Contents
Introduction............................................................................................................................................... 3
Terminal Overview ................................................................................................................................... 4
AMP8200 Terminal Overview............................................................................................................. 4
Terminal Hardware .............................................................................................................................. 5
Terminal Setup and Configuration............................................................................................................ 6
Installing the Printer Paper................................................................................................................... 6
Charging the Terminal.......................................................................................................................... 8
Configuring the Terminal Display Language..................................................................................... 10
Configuring the Terminal Network Connections............................................................................... 11
Installing the SIM Card...................................................................................................................... 12
Configuring the Terminal Wi-Fi Connection ..................................................................................... 14
Working with the Terminal ..................................................................................................................... 15
Powering the Terminal On or Off ...................................................................................................... 15
Terminal Input Options ...................................................................................................................... 16
Card Payment Options ....................................................................................................................... 17
Replacing the Printer Paper ............................................................................................................... 18
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 3of18
•
•
•
◦
◦
◦
◦
▪
▪
•
◦
◦
◦
◦
Introduction
The AMP 8200 mobile payment terminal is perfect for most applications, whether retail, bar/
restaurant, or delivery/transportation. Thissetup guide describes the following topics:
AMP8200 Terminal Overview
Terminal Hardware
Initial terminal configuration
Charging the Terminal
Installing the Printer Paper
Configuring the Terminal Display Language
Configuring the Terminal Network Connections
Installing the SIM Card
Configuring the Terminal Wi-Fi Connection
Working with the terminal
Powering the Terminal On or Off
Terminal Input Options
Card Payment Options
Replacing the Printer Paper
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 4of18
AMP8200 Terminal Overview
This document will introduce you to your payment terminal as well as guide you through the
process of preparing and configuring it in order to quickly begin processing payments.
Your AMP 8200 payment processing terminal comes with the following:
You may also have received an optional charging base, silicone sleeve, extra battery, and screen
cleaning kit, but this document addresses the most basic delivery configuration.
Payment terminal
1.
Roll of printer
paper
2.
AC charging cable
3.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 5of18
Terminal Hardware
The following illustrations show the location of the main terminal features and hardware:
Front-facing camera
(not used)
1.
Volume control
button
2.
Power button
3.
Color touchscreen
4.
Magnetic stripe
reader
5.
Chip card reader
6.
Rear camera/
scanner
7.
Battery cover
8.
Speaker
9.
Contactless payment
reader/Printer latch
10.
3.5mm audio port
11.
Micro USB charging
port
12.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 6of18
Installing the Printer Paper
If the supplied roll of printer paper was not already installed in the terminal when you received it,
you will need to install it before you can print any transaction receipts.
TIP: This procedure also applies to replacing a roll of
printer paper.
To install the printer paper:
On the back of the terminal at the top, lift the lever to unlock and open the printer
cover.
NOTE: The printer cover opens on a hinge, it does
not come off the terminal.
1.
Place the roll of printer paper in the paper tray, leaving about 2 inches (5 cm) of
paper beyond the printer's cutter.
IMPORTANT! Make sure the paper unrolls from the
back of the roll, otherwise the printer will be unable
to print the transaction receipt.
2.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 7of18
Close the printer cover until it snaps into place and remove any excess paper.
3.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 8of18
Charging the Terminal
After you remove the terminal and accessories from the box, you need to install the battery and
charge it before you can use the terminal. The battery is shipped in the terminal but is not
connected to prevent the possibility of a short circuit during transport.
To install the battery and charge the terminal:
Turn the terminal over.
1.
On the back of the terminal press the tab to unlock the cover and lift the cover
from the terminal.
2.
You should notice a tag on the battery to assist in removal.
3.
If necessary, lift the battery from the terminal to have better access to the
connection port.
4.
Insert and seat the battery connector in the port, ensuring that the red wires are
on the left side and the black wires are on the right.
NOTE: The battery connector can only fit into the
port one way and should not require much force to
insert.
5.
Re-install the battery, making sure that the tag and label are facing upwards.
6.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 9of18
NOTE: The terminal’s charging port may have a
protective cover; you will need to remove it before
inserting the micro USB port.
Re-install the battery cover on the terminal until it snaps closed and turn the
terminal over.
7.
Insert the charging cable in an AC outlet and insert the micro USB connector in the
terminal’s charging port, located on the left side, near the bottom of the terminal.
The terminal begins charging.
8.
AMP8200 Configuration and Installation
Copyright© 2022PayFacto Inc. Page 10of18
Configuring the Terminal Display Language
By default, the terminal displays all information in English. This procedure explains how to change
the terminal’s display language if necessary.
IMPORTANT! Selecting a different language changes all
text that appears on the terminal.
To change the terminal display language:
On the terminal’s main screen, touch the Settings icon.
1.
On the
Admin Login
screen, touch the Password field and use the keypad to type
the password: 1234567.
2.
Touch Login.
3.
Scroll to the Personal section and touch Language & input.
4.
Touch Language.
5.
Scroll to and touch the desired language.
6.
Touch the Back icon twice to return to the main screen.
7.
Table of contents
Other PayFacto Payment Terminal manuals
PayFacto
PayFacto PAX D210 User manual
PayFacto
PayFacto PAX A920 Pro Quick guide
PayFacto
PayFacto PAX A80 User manual
PayFacto
PayFacto PAX A35 Operator's manual
PayFacto
PayFacto PAX S80 User manual
PayFacto
PayFacto A80 User manual
PayFacto
PayFacto PAX A80 Operator's manual
PayFacto
PayFacto PAX A920 Quick guide
