Patton electronics 1170M SERIES User manual

USER

MANUAL

MODEL 1170M SERIES

EthernetFiberModems

(1170M,1171M,1172M)

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M1170M

Doc# 077351U Rev. A

Revised 4/14/03

An ISO-9001

Certiﬁed Company

CONTENTS

1.0 Warranty Information ................................................................. 3

1.1 Radio and TV Interference............................................................ 3

1.2 CE Notice...................................................................................... 3

1.3 Service.......................................................................................... 4

2.0 General Information.................................................................... 5

2.1 Features........................................................................................ 5

2.2 Description.................................................................................... 6

3.0 Installation................................................................................... 8

3.1 Installing a Fiber Modem .............................................................. 8

3.2 End-to-end connection................................................................ 11

4.0 Operation................................................................................... 12

4.1 LED indicators ............................................................................ 12

A Specifications ........................................................................... 14

A.1 Interfaces/Connectors ................................................................ 14

A.2 Interface Speed .......................................................................... 14

A.3 Transmission Mode ..................................................................... 14

A.4 Twisted-Pair/Copper Cable Type* .............................................. 14

A.5 Fiber Cable Type ........................................................................ 14

1.6 Fiber Wavelength........................................................................ 14

A.7 Fiber Optic Link Budget .............................................................. 15

Transmit power........................................................................... 15

Receiver Sensitivity.................................................................... 15

Delay Time ................................................................................. 15

Typical Fiber Max. Distance....................................................... 15

A.8 Standards ................................................................................... 15

A.9 LED Status Indicators ................................................................. 15

A.10 Compliance ................................................................................. 16

A.11 Power .......................................................................................... 16

A.12 Packaged Weight ....................................................................... 16

A.13 Dimensions ................................................................................. 16

A.14 Environment ................................................................................ 16

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 1170M Series components to be

free from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse, or unauthorized modiﬁcation. If this

product fails or does not perform as warranted, your sole recourse shall

be repair or replacement as described above.Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product.These damages include, but are not limited to, the following:lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 1170M Series generates and uses radio frequency energy,

and if not installed and used properly—that is, in strict accordance with

the manufacturer's instructions—may cause interference to radio and

television reception.The Model 1170M Series has been tested and

found to comply with the limits for a Class A computing device in accor-

dance with the speciﬁcations in Subpart B of Part 15 of FCC rules, which

are designed to provide reasonable protection from such interference in

a commercial installation. However, there is no guarantee that interfer-

ence will not occur in a particular installation.If a 1170M Series unit does

cause interference to radio or television reception, which can be deter-

mined by disconnecting the cables, the user is encouraged to try to cor-

rect the interference by one or more of the following measures: moving

the computing equipment away from the receiver, re-orienting the receiv-

ing antenna, and/or plugging the receiving equipment into a different AC

outlet (such that the computing equipment and receiver are on different

branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the Union European (EU).A Cer-

tiﬁcate of Compliance is available by contacting Technical Support.

1.3 SERVICE

All warranty and nonwarranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container.This

number may be obtained from Patton Electronics Technical Services at:

• Tel:

(301) 975-1007

• Email:

[email protected]

• URL:

http://www.patton.com

Note

Packages received without an RMA number will not be

accepted.

Caution

This device is not intended to be connected to the public

telephone network.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.It has

been thoroughly inspected and tested and is warranted for

one year

for

parts and labor. If you have any questions about this product, please call

Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

• Cost effective plug and play solution for extending your 10Base-T and

100Base-TX using 10Base-FL, 100Base-FX, and 100Base-SX ﬁber

• Supports 802.3 and 802.3u, 10Base-T, 10Base-FL, 100Base-TX,

100Base-FX, and 100Base-SX industry standards

• Extends network connections up to 2 km (1.24 miles) over multi-mode

ﬁber media.

• Low power consumption

• Auto-sensing full or half duplex Ethernet operation

• Twisted Pair MDI/MDI-X switch

• ST or SC connectors for connecting to multimode ﬁber media

• Ultra-miniature MicroPak Chassis

• LED indicators for Power, Fiber Link and Activity, andTwisted-pair Link

and Activity

• External power supply adapter with AC and DC options

2.2 DESCRIPTION

There are three base models in the Patton Model 1170M Series of stan-

dards compliant Ethernet Fiber Modems (see Table 1) that convert and

extend the reach of copper Ethernet over multi-mode ﬁber.

• The Model 1170M converts 100Base-TX to 100Base-FX and extends

up to 1.24 miles (2.0 km).

Note

The Model 1172M can be used to connect auto-sensing 10/100

and 100Base-TX/100Base-FX network devices only; it is not

capable of connecting to 10Base-T/10Base-FL network devices.

• The Model 1171M converts 10Base-T to 10Base-FL and extends up to

1.24 miles (2.0 km).

Note

The Model 1171M can be used to connect auto-sensing 10/100

and 10Base-T/10Base-FL network devices only;it is not capable

of connecting to 100Base-TX/100Base-FX or SX network

devices.

• The Model 1172M auto-negotiates and converts 10Base-T/100Base-

TX to 10Base-FL/100Base-FX and extends up to 1.24 miles (2.0 km).

Note

The Model 1172M can be used to connect auto-sensing 10/100,

10Base-T/10Base-FL, and 100Base-T/100Base-FX network

devices.The Model 1172M cannot connect a 10Base network

device on one side to a 100Base network device on the other.

If a 10Base network device is on one side of the Model 1172M,

there must be another 10Base or an auto-sensing 10/100 net-

work device on the other. If a 100Base network device is on one

side of the Model 1172M, there must be another 100Base or an

auto-sensing 10/100 network device on the other.

The Model 1172M is the ideal product for customers who currently have

10Base-T networks and/or equipment and are planning to upgrade to

100Base-TX in the future.The Model 1172 provides a migration path

Table 1:

Model 1170M conﬁgurations

Model Twisted-Pair

Standard Fiber

Standard Connector Distance Wavelength

1170M-ST 100Base-TX 100Base-FX ST 2 km 1300nm

1170M-SC 100Base-TX 100Base-FX SC 2 km 1300 nm

1171M-ST 10Base-T 10Base-FL ST 2 km 850nm

1171M-SC 10Base-T 10Base-FL SC 2 km 850nm

1172M-ST 10Base-T/

100Base-TX 10Base-FL/

100Base-FX ST 2 km 1300nm

1172M-SC 10Base-T/

100Base-TX 10Base-FL/

100Base-FX SC 2 km 1300nm

from 10Base-T/10Base-FL to 100Base-TX/100Base-FX, which elimi-

nates the need to upgrade and lowers the overall cost of ownership.

All Patton 1170M Series models are packaged in an ultra-miniature

MicroPak chassis and feature power, ﬁber link and activity, and twisted-

pair link and activity LED indicators.The Model 1170M Series of Ether-

net Fiber Modems can be ordered with ST or SC ﬁber optic connectors

and with 120VAC, 220VAC, universal interface (UI), -48 VDC, -24VDC,

or -12 VDC power supply adapters. Power cord designations for

220 VAC and UI models must be speciﬁed at the time of purchase.

3.0 INSTALLATION

The following sections describe installing and conﬁguring the Model

1170M Series of Ethernet Fiber Modems

3.1 INSTALLING A FIBER MODEM

Do the following to install the Model 1170M Series of Ethernet Fiber

Modems:

1. The MDI/MDI-X switch enables you to connect the 1170M models to

different types of network devices using a standard (straight-

through) network patch cable.

To connect the 1170M models to a terminal, transceiver, or network inter-

face card (NIC), set the switch to the MDI-X (lefthand) position (see

Figure 1).

Otherwise, to connect to a hub or switch, set the switch to the MDI (right-

hand) position (see Figure 1).

Figure 1.

MDI/MDI-X switch, Ethernet RJ-45 jack, and power jack locations

2. The Fiber Modem comes equipped with a shielded RJ-45 Jack for

Ethernet connections (see Figure 1 on page 8).

Connect the Ethernet RJ-45 jack to the appropriate 802.3 compliant

network equipment via a standard network patch cable (not pro-

vided).The pinout diagrams in Figure 2 reﬂect the pinouts of the

Ethernet RJ-45 jack when switched to MDI and MDI-X settings.

Note

Twisted-pair connections from the Ethernet RJ-45 Jack to the

network device should be 802.3 compliant (Category 5 STP or

UTP recommended) and must not exceed 100 meters (328

feet). Do not use ﬂat or satin cable.

Figure 2.

Shielded Ethernet RJ-45 Jack pin-outs with different MDI/MDI-X switch settings

T+

12345678

T+ R+ R-

MDI

R+

12345678

R+ T+ T-

MDI-X

3. Connect the dual ﬁber ST or SC connectors on the Fiber Modem

(see Figure 3) directly to the 802.3 compliant multi-mode ﬁber cable

equipped with male ST or SC connectors or via 802.3 compliant

multi-mode ﬁber patch cord (not provided) and corresponding ST or

SC ﬁber wall jacks.

Note

Verify that the cable connecting theTX and RX of the 1170M

Series unit is connected to the RX and TX respectively on the

remote 1170M Series unit or network device. End-to-end multi-

mode ﬁber connections between two Model 1170M Series

Ethernet Fiber Modems or between one Model 1170M Series

Fiber Modem and other network devices must not exceed 2 km

(1.24 miles), 298.7 m (980 ft) in 100Base-SX mode (Model

1172M only).

Figure 3.

Fiber connector locations

4. Connect the DC power output side of the power supply adapter to

the power jack (see Figure 1 on page 8) on the 1170M Series unit.

5. Connect the AC power side/cord of the power supply adapter to the

appropriate AC power source.

The Ethernet Fiber Modem will power up and LED indicators will illumi-

nate once connected to the power source.

This manual suits for next models

Table of contents

Other Patton electronics Modem manuals

Patton electronics

Patton electronics 1004A User manual

Patton electronics

Patton electronics 1012B User manual

Patton electronics

Patton electronics 1006 User manual

Patton electronics

Patton electronics 1088/C User manual

Patton electronics

Patton electronics 1007 User manual

Patton electronics

Patton electronics DIAMONDLINK 3201 User manual

Patton electronics

Patton electronics 1010B User manual

Patton electronics

Patton electronics 1226 User manual

Patton electronics

Patton electronics 2192 User manual

Patton electronics

Patton electronics 1180 User manual

Patton electronics

Patton electronics 1080A User manual

Patton electronics

Patton electronics NetLink 1082 User manual

Patton electronics

Patton electronics 1010A User manual

Patton electronics

Patton electronics 3010 User manual

Patton electronics

Patton electronics 1082/F User manual

Patton electronics

Patton electronics 1140 User manual

Patton electronics

Patton electronics 1092 User manual

Patton electronics

Patton electronics 1088/K User manual

Patton electronics

Patton electronics 1058 User manual

Patton electronics

Patton electronics 1140RC User manual

Patton electronics

Patton electronics 1020 User manual

Patton electronics

Patton electronics SMARTNODE 1200 User manual

Patton electronics

Patton electronics RocketLink 3202 User manual

Patton electronics

Patton electronics 1200P User manual

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual