Paradyne IMarc DSL 9720 CSU/DSU User manual

iMarc™DSL 9720 CSU/DSU

Installation Instructions

Document Number 9720-A2-GN10-10

May 2003

Contents

iMarc DSL CSU/DSU Overview .................................................................... 2

Upgrading a Unit to Advanced SLM Feature Set .......................................... 3

Product Documentation Online ..................................................................... 3

Package Checklist ........................................................................................ 3

Wiring and Cables You May Need ................................................................ 4

Installing the CSU/DSU ................................................................................ 5

Power-On ...................................................................................................... 10

Status LEDs .................................................................................................. 11

Troubleshooting ............................................................................................ 12

Configuration Setup ...................................................................................... 13

Verifying that Self-Test Passed ..................................................................... 14

Menu Navigation ........................................................................................... 15

Menu Hierarchy ............................................................................................ 15

Using the Easy Install Screen ....................................................................... 18

Completing Setup From the NOC ................................................................. 20

Cables and Connectors ................................................................................ 22

iMarc DSL 9720 CSU/DSU Technical Specifications .................................... 28

Important Safety Instructions ........................................................................ 29

Government Requirements ........................................................................... 30

Warranty, Sales, Service, and Training Information ...................................... 31

NOTE:

In this document, CSU/DSU refers to the line termination capability of the DSL

endpoint, and does not imply association with traditional T1 or DDS equipment.

NOTE: The FrameSaver®

product line has been

renamed to iMarc.

iMarc DSL CSU/DSU Overview

The iMarc™DSL (Digital Subscriber Line) CSU/DSU is a component in the iMarc

system. This system allows you to perform end-to-end service level management

across a hybrid DSL/Frame Relay network. Service providers can isolate and correct

problems remotely from their NOC (Network Operations Center).

The CSU/DSU has an IDSL interface and is a manageable frame relay-aware endpoint.

The following diagram shows a typical use of the iMarc DSL CSU/DSU in a network.

The iMarc DSL CSU/DSU is available in two feature sets:

Diagnostic Feature Set provides basic frame relay and diagnostic capability.

Advanced SLM (Service Level Management) Feature Set provides basic features,

plus service level management and reporting capability.

Refer to System Overview in the iMarc SLV Technical Description for a list of iMarc DSL

CSU/DSU’s features, and the capabilities provided by each feature set.

Frame

Relay

CPE

Router/

FRAD

DSL ATM

Access

Network

iMarc

xDSL Unit

03-17390

Frame

Relay DSL

ALARMS

MajorMinor

Fan

POWER

SERIAL

SMCM

CLOCK

ALARM

24681012141618

1357911131517

LAN/WANSLOT

CLOCK

SERIAL

MCC

ALARM

48VRTN

48VNEG

POWERENTRYMODULE

LEFTUNIT:LINEA

RIGHTUNIT:LINEB

WARNING!

POWERMUSTBEDISCONNECTEDATTHESOURCE

BEFOREREMOVINGORINSTALLINGTHISPWRENTRYMODULE

48VRTN

48VNEG

POWERENTRYMODULE

LEFTUNIT:LINEA

RIGHTUNIT:LINEB

WARNING!

POWERMUSTBEDISCONNECTEDATTHESOURCE

BEFOREREMOVINGORINSTALLINGTHISPWRENTRYMODULE

AT M

Switch

Copper

Loop

AT M

PVC

AT M

Switch

Customer Premises –

Remote Site DSLAM

TDM

Access

Network

FR Network

FR/ATM

IWF

AT M

Switches FR

Switches

Frame Relay NSP’s Network

DHCP

Server

Router

iMarc

Endpoint

Customer Premises –

HQ Site

LAN

Frame Relay

NSP's

Network

Operations

Center

OpenLane

NMS

DSL Provider's

Network

Operations

Center

OpenLane

NMS

Upgrading a Unit to Advanced SLM Feature Set

An iMarc DSL CSU/DSU with the Diagnostic Feature Set can be upgraded to the

Advanced SLM Feature Set at any time by ordering an iMarc Advanced SLM Activation

Certificate (Feature Number 9720-C1-220). A certificate can be ordered for a single

CSU/DSU, or for many CSU/DSUs. You must specify the model to be activated, your

OpenLane SLM system license key number, and the number of router activations to be

included on the certificate.

The OpenLane®SLM system, Release 5.3 or later, is required to schedule the activation

of Advanced SLM features and to manage the certificate activations included in the

certificate.

To learn more about activating Advanced SLM capability, refer to the iMarc SLV

Activation Instructions (Document No. 9000-A2-GK43), or contact your sales

representative.

Product Documentation Online

Complete documentation for this product is available at www.paradyne.com.

Select Library →Technical Manuals →iMarc IP/Frame Relay Devices.

Select the following documents:

iMarc SLV Technical Description (9000-A2-GB30)

iMarc SLV Configuration Reference (9000-A2-GB31)

iMarc SLV SNMP Reference (9000-A2-GB32)

iMarc SLV Operations Guide (9000-A2-GB33)

To order a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Package Checklist

In addition to these instructions, verify that your package contains the following:

❑iMarc DSL CSU/DSU

❑Power cord with power transformer

❑Cable tie for power cord strain relief

❑DSL network access cable (U.S. models only)

Be sure to register your warranty at www.paradyne.com/warranty.

Wiring and Cables You May Need

The following wiring and cables are used with this product, which uses standard

interface connectors:

❑Standard connectors: An 8-position, RJ49C-type modular wall jack for the DSL

network connection. Pins 4 and 5 are used for Ring and Tip, respectively.

❑DSL wiring: Unshielded twisted-pair wiring (CAT3, or better). The CAT3 wiring must

meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

❑Ethernet wiring: Twisted-pair wiring (CAT5, or better). The CAT5 wiring must meet

EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

For standard cables, refer to Cables and Connectors on page 22 for standard pin

numbers. For Paradyne cables, contact your sales representative to order them.

Interface

Connection Cables

Feature or

Part Number

COM

Communication

port to a PC or

asynchronous

terminal

Shielded DB9-to-DB9, Standard EIA-232

straight-through cable —

ETHERNET

Ethernet port to a

NIC on a PC or an

Ethernet hub

For connection to a PC NIC:

Standard Ethernet crossover cable 9008-F1-550

For connection to an Ethernet Hub:

Standard Ethernet straight-through cable 035-0349-1431

PORT

User data port to a

DTE

Shielded standard straight-through

DB25-to-DB25 cable for EIA-530-A

For V.35, add DB25-to-MS34 cable, or

DB25-to-MS34 adapter

For X.21, add DB25-to-DB15 adapter

—

3100-F1-570

3100-F1-572

3100-F1-571

NET

Network port to the

DSL wall jack

Standard straight-through RJ49C-type DSL

network cable with 8-pin modular connectors.

Supplied with U.S. models.

3100-F1-500

Installing the CSU/DSU

Place the iMarc DSL CSU/DSU on a flat surface with clearance for the rear connectors.

Procedure

1. Use an 8-pin modular straight-through cable for the network connection. Insert one

end of the cable into the jack labeled NET. Insert the other end into the wall jack for

DSL data communications.

DSL

Network

02-17315

ETHERNET

COM

POWER

NET

2. Use an 8-pin Ethernet cable for the Ethernet connection for local management.

Insert one end of the cable into the jack labeled ETHERNET.

— Use a straight-through cable to connect the other end of the cable to an

Ethernet hub. Do not connect to the hub’s optional Uplink connection with a

straight-through cable; the Uplink connection requires an Ethernet crossover

cable.

– or –

— Use an Ethernet crossover cable to connect to a PC with an Ethernet Network

Interface Card (NIC) installed, or to a hub’s Uplink connection.

02-17316

Hub

ETHERNET

COM

POWER

NET

Ethernet

Straight-Through

Cable

ETHERNET

3. Connect one end of the DTE’s cable to the user data port labeled PORT. Tighten

the screws on each side of the connector. Attach a cable adapter, if required. (See

Wiring and Cables You May Need on page 4.) Plug the other end of the cable or

adapter into the DTE (router or FRAD).

02-17317

ETHERNET

COM

POWER

NET

DTE

PORT

4. Use a VT100-compatible asynchronous terminal or a PC to set up management

access to the unit. Insert the DB9 plug end of an EIA-232 cable into the CSU/DSU’s

COM port. Tighten the screws on each side of the connector. Insert the other end of

the cable into the terminal or PC.

The terminal or PC’s configuration must be compatible with the CSU/DSU’s. Refer

to the procedure on page 13 under Configuration Setup. If connecting an external

modem to the COM port, refer to Connecting an External Modem on page 27.

COM

Port

02-17318

ETHERNET

COM

POWER

NET

VT100

Terminal

5. Insert the supplied power cord’s round end into the jack labeled POWER.

Depending on the model, your power supply plugs directly into a grounded outlet or

has a detachable cord that plugs into an outlet.

— If you have a wall-mount transformer, plug the transformer into a grounded AC

outlet.

— If you have a table-top transformer, verify that the cord is firmly attached to the

transformer, and plug the other end of the cord into a grounded AC outlet.

Install the supplied tie wrap for strain relief, as shown.

Installation of the hardware is now complete. When the power cord is installed, the

CSU/DSU goes through a power-on self-test.

02-17319

ETHERNET

COM

POWER

NET

rounded

Power

Outlet

Tie

Wrap

Power

Jack

Power-On

When power is applied, the CSU/DSU performs self-diagnostics and the PWR LED is

on. The self-diagnostics include a power-on self-test where all of the LEDs are on.

Refer to Status LEDs on page 11 for information about the LEDs. Refer to

Troubleshooting on page 12 for LED indications requiring action.

iMarc DSL 9720 CSU/DSU

03 17411

ALM

TEST

DSL

NetworkSystem Por t

9720

DSL

IDSL

Table of contents

Other Paradyne Network Hardware manuals

Paradyne

Paradyne 7511 User manual

Paradyne

Paradyne HotWire 7924 User manual

Paradyne

Paradyne COMSPHERE 3610 User guide

Paradyne

Paradyne 3172 Manual

Paradyne

Paradyne JetFusion 2008 User manual

Paradyne

Paradyne 9126 User manual

Paradyne

Paradyne COMSPHERE 3610 Firmware update

Paradyne

Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T User manual

Paradyne

Paradyne 3172 User manual

Paradyne

Paradyne 8540 User manual

Paradyne

Paradyne 7112 User manual

Paradyne

Paradyne JetFusion Integrated Access Device User manual

Paradyne

Paradyne MIM-4E1 User manual

Paradyne

Paradyne 3160-A3 Manual

Paradyne

Paradyne GranDSLAM 4200 User manual

Paradyne

Paradyne Dual DSU 7511 User manual

Paradyne

Paradyne Hotwire 5100 User manual

Paradyne

Paradyne MIM-4T1 User manual

Paradyne

Paradyne Hotwire 7995 User manual

Paradyne

Paradyne 4929 DSLAM User manual

Paradyne

Paradyne HotWire 8800 DSLAM User manual

Paradyne

Paradyne Hotwire 5446 User manual

Paradyne

Paradyne Hotwire 5446 User manual

Paradyne

Paradyne ACCULINK 3160 User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide

Paradyne iMarc DSL 9720 CSU/DSU User manual

Popular Network Hardware manuals by other brands