Paradyne Hotwire 8779 User manual

Hotwire®TDM SDSL

Termination Units

Models 8777 and 8779

User’s Guide

Document No. 8700-A2-GB20-40

May 2002

AMay 2002 8700-A2-GB20-40

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or

by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express

written permission of Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for a particular purpose. Further, Paradyne Corporation

reserves the right to revise this publication and to make changes from time to time in the contents hereof without

obligation of Paradyne Corporation to notify any person of such revision or changes.

Changes and enhancements to the product and to the information herein will be documented and issued as a new

release to this manual.

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For additional

information concerning warranty, sales, service, repair, installation, documentation, training, distributor locations, or

Paradyne worldwide office locations, use one of the following methods:



Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty at

www.paradyne.com/warranty.



Telephone: Call our automated system to receive current information by fax or to speak with a company

representative.

—Within the U.S.A., call 1-800-870-2221

—Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical Publications,

Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to userdoc@paradyne.com. Include the

number and title of this document in your correspondence. Please include your name and phone number if you are

willing to provide additional clarification.

Trademarks

ACCULINK, COMSPHERE, FrameSaver, Hotwire, MVL, NextEDGE, OpenLane, and Performance Wizard are

registered trademarks of Paradyne Corporation. ReachDSL and TruePut are trademarks of Paradyne Corporation. All

other products and services mentioned herein are the trademarks, service marks, registered trademarks, or registered

service marks of their respective owners.

Regulatory and Safety Information

Refer to the appropriate Digital Subscriber Line Access Multiplexer (DSLAM) manual for all regulatory notices and

safety information.

8700-A2-GB20-40 May 2002 i

Contents

About This Guide



Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . v



New Features for this Release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v



Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v



Product-Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 About Hotwire 8777 and 8779 TDM SDSL Units



TDM SDSL Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1



TDM SDSL Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2



Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3



SNMP Management Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Management Information Base (MIB) Support . . . . . . . . . . . . . . . 1-4

SNMP Trap Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

2 Using the Asynchronous Terminal Interface



User Interface Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Management Serial Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1



Logging In to the Hotwire DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Initiating an ATI Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2



Menu Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4



Screen Work Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5



Navigating the Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Keyboard Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Switching Between Screen Work Areas . . . . . . . . . . . . . . . . . . . . 2-8



Ending an ATI Session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9



Exiting From the DSLAM Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

3 Initial Startup and Configuration



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1



Entering Identity Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2



Configuring the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Contents

ii May 2002 8700-A2-GB20-40



Accessing and Displaying Configuration Options . . . . . . . . . . . . . . . . 3-4

Current and Default Factory Configurations . . . . . . . . . . . . . . . . . 3-5

Configuration Loader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7



Saving Configuration Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9



Restoring Access to the User Interface . . . . . . . . . . . . . . . . . . . . . . . . 3-10



Resetting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10



Disabling AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11



Resetting AutoRate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11



Downloading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

4 Cross-Connecting Ports



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1



Determining the Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2



Setting the Cross-Connect Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4



Assigning Time Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

5 IP Addressing



Selecting an IP Addressing Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Configurations Not Running IP Conservative Software. . . . . . . . . 5-1

All Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2



IP Addressing Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

6Security



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1



ATI Access Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2



Creating a Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3



Deleting a Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4



Controlling SNMP Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Assigning SNMP Community Names and Access Types . . . . . . . 6-5

Limiting SNMP Access through the IP Addresses of the

Managers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

7 Monitoring and Troubleshooting



What to Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1



Viewing System and Test Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

Health and Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Self-Test Results Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

Test Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9



Device Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

Contents

8700-A2-GB20-40 May 2002 iii



Performance Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11

Viewing Network Error Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12

Viewing Network Performance Statistics. . . . . . . . . . . . . . . . . . . . 7-13

Viewing DSX-1 Performance Statistics . . . . . . . . . . . . . . . . . . . . . 7-15

Viewing G.703 Performance Statistics . . . . . . . . . . . . . . . . . . . . . 7-17

Viewing Current Network Performance Statistics . . . . . . . . . . . . . 7-19

Viewing Inband Management Statistics . . . . . . . . . . . . . . . . . . . . 7-20



Viewing LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22



Front Panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24



Changing the Meaning of the PORTS LEDs . . . . . . . . . . . . . . . . . . . . 7-25



Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25

8Testing



Accessing the Test Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1



Running Network Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Network Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Repeater Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

DTE Loopback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Remote Send Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Send and Monitor 511 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8



Device Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Lamp Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9



Ending an Active Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10



Telco-Initiated Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Telco-Initiated Line Loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Telco-Initiated Payload Loopback . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Telco-Initiated Remote Line Loopback . . . . . . . . . . . . . . . . . . . . . 8-12

9 Transferring Firmware and Configurations Using TFTP



Downloading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1



Configuration Loader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

A Configuration Options



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1



Network Interface Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2



DSX-1 Interface Options (Model 8777) . . . . . . . . . . . . . . . . . . . . . . . . A-7



G.703 Interface Options (Model 8779). . . . . . . . . . . . . . . . . . . . . . . . . A-9



Copy Ports Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12



System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

Contents

iv May 2002 8700-A2-GB20-40



System Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15



Cross-Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-19

Setting Cross-Connect Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-20

Assigning Time Slots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-24



Management and Communication Options Menu . . . . . . . . . . . . . . . . A-28

Telnet Session Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-28

General SNMP Management Options. . . . . . . . . . . . . . . . . . . . . . A-30

SNMP NMS Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-32

SNMP Traps Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-34

Inband Management Channel (Model 8779) . . . . . . . . . . . . . . . . . A-37

Configuring and Testing Inband Management. . . . . . . . . . . . . . . . A-39

B Standards Compliance for SNMP Traps



SNMP Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1



ifIndex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1



warmStart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2



authenticationFailure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2



linkUp and linkDown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2



Enterprise-Specific Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

C Connector Pin Assignments



Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1



Front Panel 50-pin DTE Connector Pinouts. . . . . . . . . . . . . . . . . . . . . C-1



8610/8620 and 8810/8820 DSLAM Telco 50-pin Connector Pinouts . C-3

D Technical Specifications

E Cross-Connection Worksheets



Using the Worksheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1



Port Connection Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2



DSX-1 Time Slot Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3



G.703 Time Slot Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-11

Index

8700-A2-GB20-40 May 2002 v

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate Hotwire

8777 and 8779 Time Division Multiplexer Symmetric Digital Subscriber Line

(TDM SDSL) Termination Units, and is intended for installers and operators.

New Features for this Release

This version ofthe

Hotwire TDM SDSL Termination Units, Models 8777 and 8779,

User’s Guide

adds the inband management feature for the Model 8779

Termination Unit.

Document Summary

Section Description

Chapter 1,

About Hotwire 8777

and 8779 TDM SDSL Units

Describes the Hotwire Termination Unit’s features

and capabilities.

Chapter 2,

Using the

Asynchronous Terminal Interface

Provides instructions for accessing the user interface

and navigating the screens.

Chapter 3,

Initial Startup and

Configuration

Provides procedures for setting up the user interface

and configuring the unit.

Chapter 4,

Cross-Connecting

Ports

Provides instructions for cross-connecting the time

slots of the DSL and DTE ports.

Chapter 5,

IP Addressing

Provides IP addressing requirements and examples.

Chapter 6,

Security

Presents procedures for creating a login, setting the

effective access levels, and controlling SNMP

access.

Chapter 7,

Monitoring and

Troubleshooting

Describes using the LEDs, status messages, and

network statistics to monitor the unit and diagnose

problems.

Chapter 8,

Testing

Provides instructions for running network, DSX-1,

and G.703 tests.

About This Guide

vi May 2002 8700-A2-GB20-40

A master glossary of terms and acronyms used in Paradyne documents is

available on the World Wide Web at www.paradyne.com. Select

Library

→

Technical Manuals

→

Technical Glossary.

Product-Related Documents

Complete documentation for this product is available on the World Wide Web at

www.paradyne.com. Select

Library

→

Technical Manuals

→

Hotwire DSL

Systems.

To order a paper copy of a Paradyne document:



Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)



Outside the U.S.A., call 1-727-530-8623

Chapter 9,

Transferring Firmware

and Configurations Using TFTP

Shows how to upload and download firmware and

configuration files.

Appendix A,

Configuration

Options

Contains all configuration options, default settings,

and possible settings.

Appendix B,

Standards

Compliance for SNMP Traps

Contains SNMP trap compliance information.

Appendix C,

Connector Pin

Assignments

Lists the pin assignments for the front panel DTE

connector.

Appendix D,

Technical

Specifications

Contains physical and regulatory specifications,

network and port interfaces, power consumption

values, and accessory part numbers.

Appendix E,

Cross-Connection

Worksheets

Contains worksheets to help plan and configure

cross-connection of DTE and DSL ports.

Index

Lists key terms, acronyms, concepts, and sections in

alphabetical order.

Section Description

Document Number Document Title

7900-A2-GB21

Hotwire TDM SDSL Standalone Termination Units, Models

7974-A2, 7975-A2, and 7976-A2, User's Guide

8000-A2-GB22

Hotwire Management Communications Controller (MCC) Card,

IP Conservative, User's Guide

8000-A2-GB29

Hotwire Management Communications Controller (MCC) Card

User's Guide

8610-A2-GN20

Hotwire 8610 DSLAM Installation Guide

8620-A2-GN20

Hotwire 8620 GranDSLAM Installation Guide

8810-A2-GN20

Hotwire 8810 DSLAM Installation Guide

8820-A2-GN20

Hotwire 8820 GranDSLAM Installation Guide

8700-A2-GB20-40 May 2002 1-1

About Hotwire 8777 and 8779

TDM SDSL Units

TDM SDSL Overview

Hotwire®Time Division Multiplexer Symmetric Digital Subscriber Line (TDM

SDSL) products maximize customer service areas by varying the DSL line rate.

This ensures symmetric DSL connectivity over a wide range of telephone line

distances and transmission line qualities. Hotwire 2-wire TDM SDSL products

transmit data over 14,000 feet (4.6 km) at rates up to 2.048 Mbps.

Hotwire products support autorate. Units first synchronize to the highest line rate

that the 2-wire loop supports, then automatically configures the unit to the highest

multiple of 64 Kbps supported by that line rate. Eight line rates are available. At all

rates, an 8 Kbps management channel is available, which enables functions such

as firmware downloads to remote units. Units can also be configured manually to

full or fractional T1 or E1 rates.

1. About Hotwire 8777 and 8779 TDM SDSL Units

1-2 May 2002 8700-A2-GB20-40

TDM SDSL Features

The 2-wire Hotwire 8777 or 8779 TDM SDSL Termination Unit is a circuit board

that is mounted in a Hotwire 8610 or 8810 Digital Subscriber Line Access

Multiplexer (DSLAM), or an 8620 or 8820 GranDSLAM, and used to transport

signals at high speeds over a twisted-pair connection.

Hotwire 8777 and 8779 TDM SDSL Termination Units have these standard

features:



Cross-Connection Capability. Any DSL port and time slot can be connected

to any DTE port and time slot.



Embedded Operations Channel (EOC). Provides remote management via

SNMP or Telnet session capability over the DSL network. The bandwidth of

the EOC is a 4 Kbps dedicated channel for the Model 8777 and 8 Kbps for the

Model 8779.



Asynchronous Terminal Interface (ATI). Provides a menu-driven

VT100-compatible terminal interface for configuring and managing the unit

locally or remotely by Telnet session.



Local Management. Provides local management using the DSLAM

management card with a:

—Terminal or PC via the Management Serial port of the DSLAM

—Network Management System (NMS) via the Management MCC port of

the DSLAM through the port card’s 10BaseT port



Remote Management. Provides remote management:

—Out-of-band, using an external modem through the Management Serial

port of the DSLAM

—Inband using one of the DS0 channels as the management channel to

transport SNMP traffic to the MCC card (Model 8779 only).

—Via Telnet over the EOC



Alarm Indication. Activates front panel LEDs.



Diagnostics. Provides the capability to diagnose device and network

problems and perform tests, including digital loopbacks, pattern tests, and

self-test.



Device and Test Monitoring. Provides the capability of tracking and

evaluating the unit’s operation, including health and status, and error-rate

monitoring.

Model . . . Has eight . . . And eight . . .

8777 TDM SDSL ports DSX-1 ports

8779 TDM SDSL ports G.703 ports

This manual suits for next models

Table of contents

Other Paradyne Network Hardware manuals

Paradyne

Paradyne MIM-2T1 User manual

Paradyne

Paradyne Hotwire 8775 MSDSL User manual

Paradyne

Paradyne Compshere 3000 Series Operation and maintenance manual

Paradyne

Paradyne FrameSaver NP 64+ User manual

Paradyne

Paradyne COMSPHERE 3610 Operation and maintenance manual

Paradyne

Paradyne MCC User manual

Paradyne

Paradyne COMSPHERE 3550 Series User manual

Paradyne

Paradyne COMSPHERE 3610 User manual

Paradyne

Paradyne Hotwire 5216 User manual

Paradyne

Paradyne MIM-2E1 User manual

Paradyne

Paradyne COMSPHERE 6700 Series User manual

Paradyne

Paradyne HotWire 8800 DSLAM User manual

Paradyne

Paradyne 12000E User manual

Paradyne

Paradyne BitStorm 2600 IP DSLAM User manual

Paradyne

Paradyne T1 Access Mux 916x Use and care manual

Paradyne

Paradyne COMSPHERE 3610 Firmware update

Paradyne

Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T User manual

Paradyne

Paradyne Hotwire 5446 Operation and maintenance manual

Paradyne

Paradyne Comsphere 3510 User manual

Paradyne

Paradyne Hotwire 6210 User manual

Paradyne

Paradyne Hotwire 5446 User manual

Paradyne

Paradyne 4000E User manual

Paradyne

Paradyne 7511 User manual

Paradyne

Paradyne iMarc SLV 9820-2M User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide