Panel PSR1-EK Series User manual

www.panel.it 1

Panel PC PSR1-EK series

VIA Eden®X4

Resistive touchscreen

User’s manual

Version 1.1

All information contained in this manual, including all photographs, illustrations and software, is protected under international copyright laws, with all

rights reserved. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written

consent from Panel S.r.l. The information contained herein is believed to be accurate as of the date of publication; however, Panel S.r.l, makes no

warranty, ex- pressed or implied, with regard to the products or documentation contained within this manual. Panel S.r.l. reserves the right to change

the contents of this manual without notice. Panel shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the

use of any product, nor for any infringements upon the rights of third parties, which may result from such use. Any implied warranties of

merchantability or fitness for any particular purpose is also disclaimed. Soft- ware names, hardware names and trademarks are registered by their

respective companies.

www.panel.it 2

Chapter 1: Preface

1.1 Safety rules................................................................................................................4

1.2 Product checking...................................................................................................4

1.3 Package content....................................................................................................5

1.4 Declaration of conformity..................................................................................5

1.5 Warranty and RMA................................................................................................6

1.6 Technical support and assistance................................................................6

Chapter 2: Technical data

2.1 Introduction..............................................................................................................7

2.2 Products specifications.....................................................................................7

2.3 Bespoke front graphic customization........................................................7

2.4 Touchscreen specifications............................................................................8

2.5 Mechanical dimensions.....................................................................................9

2.6 Mechanical cut-out..............................................................................................10

2.7 Chemicals and solvents resistance..............................................................11

Chapter 3: Installation and wiring

3.1 Mounting distance................................................................................................13

3.2 Inclined mounting..................................................................................................13

3.3 Fasten PSR1.............................................................................................................14

3.4 Connecting DC power.......................................................................................15

3.5 Connecting AC power.......................................................................................15

3.6 Functional ground................................................................................................16

Chapter 4: Hardware upgrade

4.1 Removing the rear cover…………………………………………………………………. 17

4.2 RAM installation.....................................................................................................17

4.3 HDD-SSD installation..........................................................................................19

Chapter 5: Jumpers and connectors

5.1 Motherboard layout…………………………………………………………………………. 20

5.2 PSR1 I/O connectors...........................................................................................21

5.3 Motherboard jumpers setup...........................................................................22

www.panel.it 3

Chapter 6: System setup

6.1 Installing operating system............................................................................. 23

6.2 Bios setup..................................................................................................................23

6.3 Touchscreen driver and calibration............................................................23

Chapter 7: Maintenance

7.1 Cleaning......................................................................................................................24

7.2 Lithium battery........................................................................................................24

7.3 Spare parts...............................................................................................................24

www.panel.it 4

Chapter 1: Preface

1.1 Safety rules

All the Panel PC PSR1 series have been designed and built taking into account all the issues associated with an

industrial environment such as that where it is necessary to ensure the operation of the system in the presence of

vibration, moisture, dust and critical heat conditions.

Only skilled staff must make any job on the device, only after having fully read and understood the safety instructions.

Before installing and using the device, note the following precautions:

-Read all instructions carefully.

-Do not place the unit on an unstable surface, cart, or stand.

-Avoid using the system near water, in direct sunlight, or near a heating device.

-To prevent electrical shock or equipment damage, unplug the power cord from the power supply prior to

installing or wiring the PC.

-Do not disassemble or modify the Panel PC. Doing so may cause a fire or an electric shock.

All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by

qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation,

commissioning and operation of devices who also have the appropriate qualifications. National accident

prevention regulations must be observed.

1.2 Product checking

Preliminary operations to be made as soon as you receive the PANEL product:

-Check if the packing hasn’t undergone any damage due to transport.

-Verify if the packing contents correspond to the delivery note.

The product model, code and serial number are shown on the identification plate which is positioned on the rear.

If serious damages or inconsistency are found between the packing contents and the delivery note, please contact the

PANEL SRL sales department immediately.

It’s advisable to keep the original packing in order to use it for possible transports back in assistance.

www.panel.it 5

1.3 Package contents

The following items are included in the PSR1 unit’s package. Before using the PSR1, please check all the items match

the manual list.

1.4 Declaration of conformity

CE Mark, product complies with all applicable directives and their harmonized EN standards.

Doc. Int. Panel: 29102014

The products herewith complies to the requirements of:

-Low voltage directive 2006/95/EC

-EMC Directive 2004/108/EC

-RoHS Directive 2011/65/EU

-Carries marking

-EMC: EN 55022:2010 Class B

-EMC: EN 55024:2010 Class B

-LVD: EN 60950-1:2006+A11:2009+A1:2010+A12:2011

-LVD: EN 62311:2008

-LVD: EN 62479:2010

-RoHS EN 50581:2012

-Energy Use: Regulation (EC) no. 617/2013

-Energy Use: Regulation (EC) EN 62623:2013

PSR112/119 DC power supply

Qty 1 Panel PC

Qty 1 Quick guide

Qty 1 Connector DC supply

Qty 4 Retaining clips (with size up to 17”)

Qty 6 Retaining clips (with size 19.0”)

PSR112/119 AC power supply

Qty 1 Panel PC

Qty 1 Quick guide

Qty 1 Power cable (IT) 1.8m

Qty 4 Retaining clips (with size up to 17”)

Qty 6 Retaining clips (with size 19.0”)

www.panel.it 6

1.5 Warranty and RMA

Panel manufactures new products that are in accordance with industry standard. Panel warrants that products will be

free from defect in material and workmanship for 2 years, beginning on the date of invoice by Panel.

PANEL will engage to repair or eventually replace, at its discretion, the whole device or its components, which show

construction defects or malfunction if these are pointed out in writing during the warranty period.

The warranty is limited to the repairing of the defective product at our headquarters or, according to PANEL

indisputable judgment, to the replacement of the product itself.

The product under warranty must reach our headquarters equipped with the indication of the anomaly found and with

the relevant authorization number (RMA form). PANEL, doesn’t carry out any repair of products if this has not been

previously authorized by the company itself.

The transport charges must be borne by the customer.

Customers must collect all the information about the problems encountered and note anything abnormal or, print out

any on-screen messages, and describe the problems at Panel RMA Service. Contact Panel service at: suppo[email protected]

1.6 Technical Support and Assistance

About technical support and assistance, visit Panel’s website at www.panel.it

www.panel.it 7

Chapter 2: Technical data

2.1 Introduction

Panel PC fanless extremely compact. The PSR1-EK is provided with VIA Eden®X4

The aluminium anodized IP66 front panel is supplied with 5 wire resistive touch screen

2.2 Products specifications

Models

PSR112

PSR115

PSR117

PSR119

Technology construction

Standard

Display size

12.1’’

15.0’’

17.0’’

19.0’’

Resolution

800x600

1024x768

1280x1024

Brightness

450 cd/m²

500 cd/m²

350 cd/m²

Contrast

700:1

1500:1

1000:1

Max colors

16.7 millions

Touchscreen

5 wire resistive

EK board

Chipset

VIA VX900 Media System Processor

CPU

VIA Eden® X4 1.2 GHz

RAM

1x DDR3 DIMM 1600 MHz up to 4 GB

I/O ports

2x Gigabit LAN, 1x VGA

2x RS232, 4x USB 2.0, 1x Line Out, 1x Mic-in, 1x Line-in, 2x PS/2 ports

Expansions

-----

Storage

C-Fast cards

-----

SSD

32, 64, 128, 256 GB size: 2.5”

Operating System

DOS, Windows XP Professional SP2, XP Professional SP3, 7 SP1, XP Embedded SP2, XP Embedded SP3,

7 Embedded Standard

Mounting

Panel mounting

Protection grade

IP66 (frontal)

Dimensions (WxHxD) mm

335x270x81

390x315x81

455x355x86

490x390x86

Weight

3.5 Kg

4.5 Kg

6 Kg

7.5 Kg

Rated input voltage

24 VDC (110 –230 VAC optional external power supply)

DC Input voltage limits

9…..29 VDC

Typical Power

32 W

35 W

42 W

Operating Temperature

0° ÷ 50 °C

Cooling Type

Fanless

Conformity

2.3 Bespoke front graphics customization

Optional, provided on request

www.panel.it 8

2.4 Touchscreen specifications

Scope: The specification is for Five-Wire Analog Resistive touch panel.

Features

Type: Five-Wire Analog Resistive

Input Mode: Stylus or Finger

Environmental Characteristics

Operation temperature: -10 °C ~ +70 °C; Humidity 20% RH ~ 80% RH Non Condensing

Storage temperature: -40 °C ~ +80 °C; Humidity 10% RH ~ 85% RH Non Condensing

Optical Characteristics

Transparency: 80% ± 3% (Measured by BYK-Gardner)

Haze: 8% ± 3%

Electrical Characteristics

Loop resistance: X: 20 ~ 500Ω, Y: 20 ~ 500Ω

Linearity: X ≦1.5%, Y ≦1.5%

Chattering: ≦15ms

Insulation: ≧20 MΩ/25V (DC)

Endurance: No acting damage at DC 50V/60 sec.

Mechanical Characteristics

Operating force specifications: Stylus = R0.8; Condition: ≦50g

Impact: 3.0 mm DIA. Steel Ball / 9g, Height=30 cm

Static Load: 500g within 10cm2area for 30 sec

Hardness: 3H pencil, pressure 1N/45°

Speeling: 800g/cm by vertical 90°

Reliability

High temperature / Humidity: 70°C / 90% RH, 500 hrs, normal environment for 4 hrs

High temperature: 70°C / 500 hrs allow panel stays in normal environment for 4 hrs

Low temperature: -40°C / 500 hrs allow panel stays in normal environment for 4 hrs

Thermal Cycle: -40°C ~ 70℃[60 min./cycle] *100 cycles normal environment for 4 hrs

Durability

Knock Test: 35,000,000 times

5-Wire USB Touch Panel Controller

Power Requirements: DC +5V (100mA typical, 50mV peak to peak maximum ripple and noise)

Operating Temperature: -25 to 85 ℃

Storage Temperature: -25 to 85 ℃

Relative Humidity: 95% at 60 ℃, RH Non-condensing

Interface: USB: 1.1 Full Speed

Resolution: 2048×2048 resolution

Report rate: USB: Max. 200 points/sec

Response time: Max. 20 ms

MTBF: 200,000 hrs

www.panel.it 9

2.5 Mechanical dimensions

PSR1 display units with retaining clips

All dimensions are specified in mm

Display size

Model

12.1”single touch resistive

PSR112

335

270

3.5

305

312

230

247

15.0”single touch resistive

PSR115

390

315

305

367

230

292

17.0” single touch resistive

PSR117

455

355

63.5

305

432

230

332

19.0”single touch resistive

PSR119

490

390

305

467

230

367

www.panel.it 10

2.6 Mechanical cut-out

All dimensions are specified in mm

The cut-out tolerance values are +1 mm / -1 mm

Display size

Model

Zmin

Zmax

Number of retaining clips

12.1”single touch resistive

PSR112

315

250

15.0” single touch resistive

PSR115

370

295

17.0” single touch resistive

PSR117

435

335

19.0”single touch resistive

PSR119

470

370

This manual suits for next models

Table of contents

Other panel Touchscreen manuals

panel

panel PMG2 Series User manual

panel

panel PSR1-FO Series User manual

panel

panel PSR3-EK Series User manual

panel

panel PC PSR1-EP Series User manual

panel

panel PVR-EM Series User manual

panel

panel PSR110-EM Series User manual

panel

panel PSR3-EM Series User manual

panel

panel PC PSR108-FM Series User manual

panel

panel PC PSG2-EP Series User manual

panel

panel PSR3-EP Series User manual

panel

panel PC PSR110-FM Series User manual

panel

panel PC PSG2-EN Series User manual

panel

panel PSG2-EM Series User manual

Popular Touchscreen manuals by other brands

Elecro Engineering

Elecro Engineering Poolsmart Plus Installation & operating manual

Johnson Controls

Johnson Controls IQ4 HUB installation manual

Elo TouchSystems

Elo TouchSystems ET2270L user manual

Elo TouchSystems

Elo TouchSystems ET1002L user manual

Elo TouchSystems

Elo TouchSystems 3201L user manual

Duratec

Duratec S15 user manual

Crestron

Crestron TPMC-3SM quick start guide

Racelogic

Racelogic MFD Touch manual

J2 580 System manual

HAI

HAI OmniTouch 10p user manual

Tipro

Tipro FREE+ Getting started

Systemline

Systemline Commander installation guide

Interactive Technologies

Interactive Technologies Insite quick start

GVision

GVision Legacy installation guide

BeiJer

BeiJer T21C-C24 installation manual

Advantech

Advantech ITM-5117 Series user manual

Edge

Edge CS user guide

Elo TouchSystems

Elo TouchSystems WALLABY PRO Assembly instructions

panel PSR1-EK Series User manual

Popular Touchscreen manuals by other brands