Panasonic ET-PFD465 User manual

MODEL

ET-PFD465

FRAME-EVO-P14 / P14-US

Mounting frame for projectors

The following projectors can be mounted in this frame:

LCD Projectors

PT-MZ16KL

PT-MZ13KL

PT-MZ10KL

These installation instructions must always be provided to the customer

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 1of 38

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 2of 38

Table of content

1. Preamble ....................................................................................................... 3

1.1 FRAME-EVO-P14 / P14-US designation ......................................................................................3

1.2 Optional accessory designation .................................................................................................4

1.3 Tools required...........................................................................................................................5

2. Safety instructions......................................................................................... 5

3. What’s in the box?....................................................................................... 11

4. Optional Accessories ................................................................................... 12

5. Fitting the projectors in the frame .............................................................. 15

6. Removing the Upper Ring - Installation Version ......................................... 17

7. Reinstalling the Upper Ring ......................................................................... 19

8. Adjustment options..................................................................................... 21

9. Stacking frames ........................................................................................... 23

10. Mounting the frame on a truss.................................................................. 24

11. Maximum stacking information ................................................................ 26

12. System maintenance and inspection (Re-examination)............................ 32

13. Declaration of Conformity ......................................................................... 35

14. Dimensions ................................................................................................ 36

14.1 FRAME-EVO-P14 / P14-US .....................................................................................................36

14.2 FRAME-EVO-P14 / P14-US Installation Version - without the Upper Ring...............................37

Imprint............................................................................................................. 38

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 3of 38

1. Preamble

Congratulations on your purchase of the FRAME-EVO-P14 / P14-US projector frame from

EXACT solutions GmbH.

Please read very carefully the instructions provided in this manual. In the following pages

you will find all the information needed for a safe and fast installation.

After the installation is done properly, you can enjoy all the features of your new product.

Please consider keeping the original box and packaging materials, in case you ever need to

ship the frame.

Model number: FRAME-EVO-P14 / P14-US

1.1 FRAME-EVO-P14 / P14-US designation

European market

Non-European market

Manufacturer m.no.: FRAME-EVO-P14

Panasonic EU m.no.: ET-RFD50

Manufacturer m.no.: FRAME-EVO-P14-US

Panasonic USA m.no.: ET-PFD465

m.no. = model number

Note: In this manual, when reference is made to the manufacturer model number it is also

automatically a reference to the Panasonic EU / USA model number like described in the

table above

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 4of 38

1.2 Optional accessory designation

European market

Non-European market

Manufacturer m.no.: FRAME-PF-UNI-PORAD

Panasonic EU m.no.: ET-CLP-P

Manufacturer m.no.: FRAME-PF-UNI-PORAD

Panasonic USA m.no.: - (non-USA product)

Manufacturer m.no.: FRAME-PF-UNI-CLP5030

Panasonic EU m.no.: ET-CLP50

Manufacturer m.no.: FRAME-PF-UNI-CLP5030

Panasonic USA m.no.: ET-PFD50CLAMP

Manufacturer m.no.: FRAME-PF-UNI-CLP30PT

Panasonic EU m.no.: ET-CLP30

Manufacturer m.no.: FRAME-PF-UNI-CLP30PT

Panasonic USA m.no.: ET-PFD30CLAMP

Manufacturer m.no.: EVO-LINK-200

Panasonic EU m.no.: TBD

Manufacturer m.no.: EVO-LINK-200-US

Panasonic USA m.no.: ET-PFD065TMS2

Manufacturer m.no.: EVO-LINK-201

Panasonic EU m.no.: TBD

Manufacturer m.no.: EVO-LINK-201-US

Panasonic USA m.no.: ET-PFD165TMS2

Manufacturer m.no.: EVO-LINK-210

Panasonic EU m.no.: TBD

Manufacturer m.no.: EVO-LINK-210-US

Panasonic USA m.no.: ET-PFD265TMCX2

Manufacturer m.no.: EVO-LINK-211

Panasonic EU m.no.: TBD

Manufacturer m.no.: EVO-LINK-211-US

Panasonic USA m.no.: ET-PFD365TMCX2

m.no. = model number

Note: In this manual, when reference is made to the manufacturer model number it is also

automatically a reference to the Panasonic EU / USA model number like described in the

table above.

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 5of 38

1.3 Tools required

The only tool required is a 4 mm hex key to mount the projector in the FRAME-EVO-P14 /

P14-US.

2. Safety instructions

These installation instructions must always be handed over to the installing person.

Read these instructions carefully before installing the system.

INTENDED USE

The FRAME-EVO-P14 / P14-US frame is intended for use by fully qualified, trained and

competent persons to provide safe and secure transportation, installation and adjustment

of projectors.

Only use the frame with projector in a closed environment (conference rooms, theatres,

convention halls, etc.) where there is no wind, moisture, excessive heat etc.

Make sure that only the corresponding projectors are installed in this frame! Do not try to

use it with other projectors because serious accidents can occur!

Only a qualified person should install this product

4 mm hex key (Allen key)

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 6of 38

WARNINGS

Installation work should only be carried out by a qualified technician.

If this product is not installed correctly, serious accidents may result.

Do not use the FRAME-EVO-P14 / P14-US frame outdoors.

This product is made only for indoor usage. If the FRAME-EVO-P14 / P14-US frame is

mounted outdoor, there are many influences like wind or rain that can have an effect

on the stability of the whole system. This can cause serious accidents and property

damage.

Do not place the frame on top of unstable surfaces.

If the frame is placed on top of a surface which is sloped or unstable, it may fall down

or tip over and injury or damage could result. Make sure that the surface can support

a load of 130 kg (286.601 lbs)

plus the weight of all additional equipment as well as

other potential systems.

Do not hang the frame from unstable or inappropriate structures.

If the frame is hung on an unstable structure, the entire system can fall down and

injuries may occur. Make sure that the construction can support a total weight of 130

kg (286.601 lbs) plus the weight of all additional equipment as well as other potential

systems.

Make sure to not exceed max. weight loads for ceiling mounting.

For suspended installations, use only designated hanging accessories, like EVO-LINK-

200 series, FRAME-PF-UNI-PORAD Portrait Adapter and FRAME-PF-UNI-CLP5030,

FRAME-PF-UNI-CLP30PT rigging clamps for a max. weight load of 130 kg (286.601

lbs). Please refer to the corresponding instructions for the accessories used. Please

also refer to chapter “4. Optional Accessories” and “11. Maximum stacking

information”.

130 kg (286.601 lbs) = 3 x (weight of heaviest projector + weight of heaviest lens + weight of FRAME-EVO-P14 / P14-US)

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 7of 38

For stacking, make sure that all four locking pins pass completely through the female

stacking bolt.

Make sure the four male bolts enter into the correspondent female bolts and are

locked.

Do not install the FRAME-EVO-P14 / P14-US or the projector while people are present

under the mounting zone during the installation process.

When installing the projector, make sure no one is in the area underneath the

installation zone.

Always secure the frame to the rigging truss with a safety steel cable.

The frame should always be secured with an appropriate safety steel cable so that in

case of a malfunction it doesn’t fall more than 5 cm. Please consult the local laws or

regulations regarding the additional safety of hanging equipment.

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 8of 38

CAUTION

Before installing the projector in the FRAME-EVO-P14 / P14-US frame, please read the

projector’s user manual. When the projector has a lens attached, please remove it.

The FRAME-EVO-P14 / P14-US frame with the projector inside must be installed only

in an environment that is recommended by the projector manufacturer.

Minimum two persons are required to install the FRAME-EVO-P14 / P14-US frame.

With regard to the overall weight of all necessary installation devices, make sure to

handle those with at least two people.

Make sure that the structure from which you hang up to 3 FRAME-EVO-P14 / P14-US

frames including projectors is capable of carrying the overall weight of approx. 130 kg

(286.601 lbs) plus the weight of all additional equipment as well as other potential

systems.

Prior to any installation, you must do a visual inspection to make sure that the

system is in a good condition. For more information please refer to chapter

“12. System maintenance and inspection (Re-examination)”.

Manual FRAME-EVO-P14 / P14-US

02.01.2020

Page 9of 38

RISK SITUATIONS

Risk of injury due to the possibility of falling objects during the assembly or disassembly of

the FRAME-EVO-P14 / P14-US frame.

Protection objective: avoid injury from falling parts.

Wear appropriate safety shoes, gloves and helmet.

Make sure the area is clear under the frame during installation.

Risk of hitting the head with the FRAME-EVO-P14 / P14-US frame during the hanging set

up process.

Protection objective: avoid injury from hitting the head.

Wear a helmet.

Incorrect installation may lead to certain parts of the FRAME-EVO-P14 / P14-US frame or

the entire FRAME-EVO-P14 / P14-US frame to fall down.

Protection objective: prevent personal injury and property damage.

Double check the FRAME-EVO-P14 / P14-US frame and its installation.

Insufficient load capacity of the supporting structure may lead to certain parts of the

FRAME-EVO-P14 / P14-US frame or the entire FRAME-EVO-P14 / P14-US frame to fall

down.

Protection objective: prevent personal injury and property damage.

Provide adequate dimensioning of the supporting structure. The supporting structure

must be able to support the combined weight of all the equipment attached to, or

hung from it.

Ensure correct installation of the supporting structure.

This manual suits for next models

Table of contents

Other Panasonic Projector Accessories manuals

Panasonic

Panasonic ET-PKB50 Installation instructions

Panasonic

Panasonic TY-FB10WPE User manual

Panasonic

Panasonic ET-LAV100 User manual

Panasonic

Panasonic ET-EMW200 User manual

Panasonic

Panasonic ET-RFF100 Guide

Panasonic

Panasonic ET-SFR330C User manual

Panasonic

Panasonic ET-MD77NT User manual

Panasonic

Panasonic ET-ELW21 User manual

Panasonic

Panasonic ET-LAEF100C User manual

Panasonic

Panasonic PressIT TY-WPS1 User manual

Panasonic

Panasonic ET-D75MRS10 User manual

Panasonic

Panasonic ET-SFD320C User manual

Panasonic

Panasonic ET-LAL330 User manual

Panasonic

Panasonic TY-WPR1 Operating instructions

Panasonic

Panasonic ET-LAA410 User manual

Panasonic

Panasonic ET-ELW02 Use and care manual

Panasonic

Panasonic ET-LAD60A User manual

Panasonic

Panasonic ET-RFL100 User manual

Panasonic

Panasonic ET-LAV200C User manual

Panasonic

Panasonic ET-PAD310 User manual

Panasonic

Panasonic ET-D3QW200 User manual

Panasonic

Panasonic ET-ELW20 User manual

Panasonic

Panasonic ET-PFD560 User manual

Panasonic

Panasonic ET-LAL100 User manual

Popular Projector Accessories manuals by other brands

Optoma

Optoma BX-AL133B datasheet

PEERLESS

PEERLESS PE 1120 Installation and assembly

Osram

Osram SIRIUS HRI Series Directions for use

Presentation Switchers

Presentation Switchers PS111 quick start

Kramer

Kramer VIA GO user manual

Yamaha

Yamaha PJL-112 Replacement guide

Swedstyle

Swedstyle CL23AA02ZA25E operating manual

Mitsubishi Electric

Mitsubishi Electric 236CB Features

Epson

Epson BrightLink 475Wi user guide

Acer

Acer WP100 quick guide

i3 i3board user manual

CHIEF

CHIEF HB-43E installation instructions

Biamp

Biamp Modena Hub Network administrator's guide

NEC

NEC MP10RX Quick setup guide

Panamorph

Panamorph DCR-S3 installation guide

Exact solutions

Exact solutions FRAME-EVO-P10 manual

CHIEF

CHIEF VCM103S installation instructions

InFocus

InFocus LP70+ Replacement instructions