Panasonic EY7549 User manual

distribution is a violation of law.

Order Number PTD1301X19CE

Cordless Multi- Impact & Drill Driver

Model No. EY7549

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 8

5 Wiring Connection Diagram ---------------------------------15

6 Schematic Diagram ---------------------------------------------15

7 Exploded View and Replacement Parts List -----------16

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide

3.2. Trial Operation (After Checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• Confirm all screws are tightened firmly.

3.2.2. Operation

• Check whether the tool operates properly in both the forward and reveres directions.

• Check whether the LED light turns on and off each time the LED light on/off button is depressed.

• Check whether the tool speed increases continuously as the trigger is gradually engaged.

• Check whether the tool speed is normal after repair and reassembly.

*Please refer to the specifications on page 2.

• Check whether the tool may become hot in a short operation.

• Set the clutch handle to the mark and check whether the tool rotates without any clutch operation.

• Pull the trigger all the way back and check whether the tool stops rotating immediately when it is released.

• Rotate the clutch handle and check whether the clutch switches properly.

• Check whether impact operation functions properly.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

4 Disassembly and Assembly Instructions

*To assemble the tool, start with 4-12 and proceed to 4-1

4.1. Removing the plate hook

4.2. Removing the Fixation cover assembly

4.3. Removing the housing

4.4. Removing the switch assembly

4.5. Removing the Module assembly

Other manuals for EY7549

Table of contents

Other Panasonic Power Tools manuals

Panasonic

Panasonic EY4541X57 User manual

Panasonic

Panasonic EY46A5 User manual

Panasonic

Panasonic EYFLA5A User manual

Panasonic

Panasonic EYFLA4 User manual

Panasonic

Panasonic EY3610 User manual

Panasonic

Panasonic EY7550LR2S User manual

Panasonic

Panasonic EYFPA1C User manual

Panasonic

Panasonic EYFLA4A User manual

Panasonic

Panasonic EY7541 - CORDLESS IMPACT WRENCH User manual

Panasonic

Panasonic EY3640 User manual

Panasonic

Panasonic 7552LJ User manual

Panasonic

Panasonic EY4542 - CIRCULAR SAW 14.4V User manual

Panasonic

Panasonic EYFLA4A User manual

Panasonic

Panasonic EYFME1C User manual

Panasonic

Panasonic EYFMA1B User manual

Panasonic

Panasonic EY3610 User manual

Panasonic

Panasonic EY74A2 User manual

Panasonic

Panasonic EY75A8 User manual

Panasonic

Panasonic EY4541 User manual

Panasonic

Panasonic EYFEA1N Operating instructions

Panasonic

Panasonic EY3640 User manual

Panasonic

Panasonic EY74A2X User manual

Panasonic

Panasonic EY4541 User manual

Panasonic

Panasonic EY4541 User manual

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Fein

Fein BSS 2.0 E Repair instructions

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Fein

Fein BLs 1.6 parts list

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual