Panasonic PN54021K User manual

Product Outline

1000BASE-SX SFP Module and 1000BASE-LX SFP Module are SFP (Small Form-Factor

Pluggable) modules to be connected to a Panasonic Switching Hub’s SFP extension slot.

1000BASE-SX SFP Module 1000BASE-LX SFP Module

PN54021K PN54023K

IEEE802.3z

1000BASE-SX

IEEE802.3z

1000BASE-LX

SFF-8472 (Diagnostic Monitoring Interface)

850 nm 1310 nm

DC 3.3 V

0 to 50°C /20 to 80% RH (No dew condensation)

Specifications

Product name

Standards

Compatible cable

Optical wavelength

Operating voltage

Power consumption

Operating ambient

temperature/humidity

Fiber optic port

connector type

Accessories

MMF cable

LC connector (Duplex)

SMF, MMF cable

0.7 W max 0.9 W max

External dimensions

Mass (Weight) 17 g

9 mm (Height) x 14 mm (Width) x 57 mm (Depth)

(Excluding protruding sections)

Installation Guide (this document)

x 1

Protection cap of the fiber optic port (Attached to the module)

x 1

Module No.

MMF: Multi Mode Fiber SMF: Single Mode Fiber

1. Securely connect the SFP Module to the SFP

extension slot of a Panasonic Switching Hub.

2. Remove the protective cap of the SFP

Module’s fiber optic port.

3. Connect a fiber optic cable that meets the

standards specified for the SFP Module.

4. Connect another SFP Module of the same

model number on the opposite end.

Installation

SFP extension slot

SFP Module

Fiber optic port Switching Hub

1. Unlatch the fiber optic cable and remove it from the SFP

Module.

2. Pull down the lever of the SFP Module 90 degrees as

shown in the figure to unlatch the SFP Module.

3. Pull out the SFP Module.

Removal

Lever C0913-10719 Printed in Japan

 Thank you for purchasing our product.

 This document provides important information about safe and proper

operations of this SFP Module.

 Please read the "Important Safety Instructions".

 Any problems or damage resulting from disassembly of this SFP

Module by customers are not covered by the warranty.

PN54021K/PN54023KModel No.

1000BASE-LX SFP Module (SFP-1000LX)

1000BASE-SX SFP Module (SFP-1000SX)

Installation Guide

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021

This chapter contains important safety instructions for preventing bodily injury

and/or property damage. You are required to follow them.

Do not look at the laser light.

Deviation could lead to visual impairment. (Class 1 Laser Product)

Do not disassemble and/or modify this SFP Module.

Deviation could lead to fire, electric shock, and/or equipment failure.

 Severity of bodily injury and/or property damage, which could result from incorrect

use of the SFP Module, are explained below.

 The following symbols are used to classify and describe the type of instructions to be

observed.

Important Safety Instructions

This symbol indicates safety instructions.

Deviation from these instructions could lead to

bodily injury and/or property damage.

CAUTION

This symbol indicates a potential hazard

that could result in serious injury or death.

WARNING

This symbol is used to alert

users to what they must do.

This symbol is used to alert

users to what they must not do.

WARNING

CAUTION

Handle the SFP Module carefully so that fingers or hands may not be

injured by its end connected to the Switching Hub or the SFP extension

slot of the Switching Hub.

Basic Instructions for the Use of This Product

For inspection and/or repair, consult the retailer.

Correctly and securely connect the SFP Module to the SFP extension slot of

a Panasonic Switching Hub.

Check the connector of the fiber optic cable for dirt and dust. If it is dirty,

be sure to clean it before connecting it to the fiber optic port.

Remove the SFP Module from the SFP extension slot before cleaning the

SFP Module.

Do not touch the metal terminal or place electrically-charged objects in the

proximity of the SFP Module. Static electricity could lead to breakdown.

Please use the SFP Module in locations where the ambient temperature is

within the range of 0 to 50°C.

Do not use the SFP Module in any condition where the specification limits

are exceeded.

Deviation could lead to malfunctions.

1. Panasonic will not be liable for any damage resulting from the operation not in

accordance with this document or the loss of communications, which may or

may not be caused by failure and/or malfunction of this product.

2. The contents described in this document may be changed without prior notice.

3. For any question, please contact the shop where you purchased the product.

 The port LED of the Switching Hub to which the SFP Module connected is not lit.

Is the Switching Hub powered on?

Is the SFP Module securely connected to the target SFP extension slot of the

Switching Hub?

Is the connected port of the Switching Hub enabled?

Is the cable correctly connected to the target port?

Is a conforming cable used? Is the same type of SFP Module used on the

opposite end?

Is the equipment connected to the target port compliant with the specified

standards?

Ensure that 100BASE-FX or 10GBASE equipment is not connected.

Troubleshooting

If you find any problem, please take the following steps to check.

This manual suits for next models

Table of contents

Other Panasonic Network Hardware manuals

Panasonic

Panasonic Schottky Barrier Diodes MA24D60 User manual

Panasonic

Panasonic Schottky Barrier Diodes MA27E02 User manual

Panasonic

Panasonic Transistors 2SA2122G User manual

Panasonic

Panasonic Zener Diodes MAYS0750Y User manual

Panasonic

Panasonic WJ-NXF02 User manual

Panasonic

Panasonic WJ-NV200 User manual

Panasonic

Panasonic Transistors 2SC2480 User manual

Panasonic

Panasonic ESD Diodes MAZE062D User manual

Panasonic

Panasonic Transistors 2SC4805G User manual

Panasonic

Panasonic Schottky Barrier Diodes MA27D270G User manual

Panasonic

Panasonic Rectifier Diodes MA6X129 User manual

Panasonic

Panasonic RD-AA8190-01 User manual

Panasonic

Panasonic Schottky Barrier Diodes MA3J745EG User manual

Panasonic

Panasonic Schottky Barrier Diodes MA3XD21 User manual

Panasonic

Panasonic Rectifier Diodes MA2J115 (MA115) User manual

Panasonic

Panasonic TY-FB7HM User manual

Panasonic

Panasonic Switching Diodes MA6X128 (MA128) User manual

Panasonic

Panasonic BB-HCS301A - Network Camera Server Operating instructions

Panasonic

Panasonic Switching Diodes MA36132E User manual

Panasonic

Panasonic Schottky Barrier Diodes MA3Z792DG User manual

Panasonic

Panasonic WJ-PB85Y08 User manual

Panasonic

Panasonic Schottky Barrier Diodes MA2SE01 User manual

Panasonic

Panasonic GA-ML Series User manual

Panasonic

Panasonic Zener Diodes MAZSxxxG Series User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide