Panasonic KX-TDA50 Manual

Technical Information

DATE: MONDAY, AUGUST 31, 2009

DOCUMENT NO.: TN-KX-TAUDIO-083109

Title: Audio Issue on IP Phone

Systems Affected: KX-TDA 50/100/200/600, KX-TDE 100/200/600, and KXT-NCP 500/1000

Associated Tech Notes: None

Applications:

• Identify and resolve audio issues on a network and over the Internet.

What is covered?

Troubleshooting VOIP audio issues may be new to you. By searching the phrase "troubleshooting voip audio issues" on

the Web, you'll be able to find a lot of useful information. But before you search the Web, we would like to share with you

the information that we have developed concerning the following topics:

• Use VoIP Tool Test to identified and prevent any issues with one-way audio on a network and over the Internet.

• Configure the router and/or firewall and PBX for both data voice traffic.

• Re-run the VoIP Tool Test to ensure that each UDP port numbers has been enabled for both data and voice traffic.

VoIP Test Tool Features:

1) You can confirm which UDP port numbers for VoIP signal are blocked by a router or firewall.

2) Audio test: Can talk using VoIP. (PC-to-PC talk)

3) Audio test: Pre recorded file can be played on the other PC and it is sent to your PC).

4) Audio test: Traffic option (Max.100 VoIP channels can be sent in order to increase traffic and disturb

talk test or disturb data transmission such as WEB access).

5) PING.

6) Trace Route.

7) Chat (You can use that as a tool to communicate to the Tech person in the other site).

8) Report.

Pg. 1

Please Continue to Next Page

3DQDVRQLF7HOHSKRQH6\VWHPV

www.voicesonic.com

Phone 877-289-2829

KX-TDA50

KX-TDA100

KX-TDA200

KX-TDA600

KX-TDE100

KX-TDE200

KX-TDE600

KX-NCP500

KX-NCP1000

For the purpose of this technical document, Two PCs are required at each specific IP network for this test.

Important Note:

Do not use any IP Softphone or SIP client while running this VoIP tool test.

Run the test in both directions of the IP network to get an accurate test result from the VoIP tool test.

Preparation:

1) Go to the BTS Dealer website at www.btsdealer.com.

2) Click on the Technical Support tab.

3) Click on the Software tab.

4) Under the KX-TDA/KX-TDE Unified Programming Tool & VoIP Test Tool, save the VoIP Test Tool

application onto the Local drive, preferable the Desktop folder.

5) Install the VoIP Test Tool onto both PCs.

6) Start the VoIP Test Tool on both PCs.

(*Reminder: If you are considering testing the VoIP Test Tool on a Point to Point IP network, between

two remote sites and you have verified that you are able to ping the remote gateway and PC, then

another person must be available at the remote site to conduct and simulate the VoIP Test.)

7) Configure the VoIP Test options accordingly, whether it is the VoIP Signal Test or the Audio Test.

8) Start the VoIP test from either PC, such as Site A or Site B) by clicking on the Connect button in the

Menu Bar.

9) The PC that started the connection will be Local and the other PC will be Remote.

10) The VoIP test will run for a period of 2 to 3 minutes and then will disconnect with the test result.

11) Save the test log onto you PC and run the same test on the remote PC.

Router Configuration:

1) Make sure you have either a router or a firewall with the latest firmware that can run and support VoIP

networks. Quality of Service (QOS)

2) Make sure you have the following UDP (RTP: Real-Time Protocol) ports enable on either router or

firewall to support VoIP traffic:

A) 1719 and 1720

B) 5004 through 5006.

C) 5060.

D) 5061.

E) 8000 through 8034.

F) 16384 through 16482.

3) Make sure that the router and firewall are configured for QoS: Quality Of Service and separate VLANs

to ensure priority of data and voice traffic on the IP network.

(*Note: Get assistance from the network administrator to configure the router, switch or firewall

accordingly).

Pg. 2

Please Continue to Next Page

PBX setting:

Make sure you have the IP addresses for both the IPCMPR and VoIP-DSP in sequence and in the same IP

range on the IP network. For example, if the private IP network is 192.168.0.0/24, then set the IPCMPR for

192.168.0.101, the VoIP-DSP for 192.168.0.102, Subnet mask 255.255.255.0 and the default gateway address

is 192.168.0.1.

(*Note: You can assign public IP address scheme on both IPCMPR and VoIP-DSP as well, check with your

provider for details.)

KX-NCP Screenshot:

From the System Menu, click on Configuration / Slot (1.1). Hover your mouse pointer onto the IPCMPR card

and select Card Property. From the LAN Setting tab, here is where you want to set the IP address scheme for

the PBX to communicate over the IP network.

Pg. 3

Please Continue to Next Page

KX-TDE Screenshot:

From the System Menu, click on Configuration / Slot (1.1). Hover your mouse pointer onto the IPCMPR card

and select Card Property. From the LAN Setting tab, here is where you want to set the IP address scheme for

the PBX to communicate over the IP network.

Pg. 4

Please Continue to Next Page

KX-TDA IPGW4 Screenshot:

(*Note: You will have to log onto the IPGW4 card via Microsoft Internet Explorer using the default IP address:

192.168.1.200, username / password: Administrator / Administrator. Make sure your PC is on the same

network: 192.168.1.0 / subnet mask: 255.255.255.0 in order to log into the IPGW4 card.)

Once the router and PBX system have been configured, run the VoIP Test Tool again for the final test result.

Pg. 5

Please Continue to Next Page

Troubleshooting the audio issue on an IP Network:

1) Ping the remote IP address of the router and PBX to ensure connectivity of the remote site are still

active. Ping Plotter, a useful tool to ping various nodes either at a remote site or over the Internet and

get statistic of the test result, can be downloaded from their website: http://www.pingplotter.com.

2) If using a VPN connection, make sure that packet forwarding is disabled on both VPN routers.

3) Make sure that the IP phone was configured on the same IP network as the PBX before relocating the

phone to the remote site.

4) If you are experiencing audio issue from a remote site, consult with your network team to troubleshoot

the NAT configuration. If NAT is involved in the call path, configuration of the various devices may be a

problem.

5) Download, install and use the network sniffer-capturing application called WireShark from their website:

http://www.wireshark.org to capture the packets on existing IP network. You would conduct the

following troubleshooting steps:

a. Start capturing from your PC at the local site.

b. Make a VoIP call that will have one-way audio.

c. Analyze the capture packet.

d. If the problem has been found, then resolve it and retest it again.

e. Otherwise run the capture tool, using another IP phone and restart the capturing test.

6) If the problem is intermittent, then a long-term simultaneous capture at multiple points can be used to

attempt to capture a complete call with the problem. Most capture tools will let you capture only traffic

from selected devices, so the volume of captured information can be kept to a reasonable size.

7) Finally, submit the test report to the Panasonic Technical Support’s e-mail address:

[email protected]m.

3DQDVRQLF7HOHSKRQH6\VWHPV

Panasonic Manuals www.voicesonic.com

Phone 877-289-2829

Other manuals for KX-TDA50

This manual suits for next models

Table of contents

Other Panasonic IP Phone manuals

Panasonic

Panasonic KX-UTG 300B User manual

Panasonic

Panasonic Section 770 User manual

Panasonic

Panasonic KX-T7531 User manual

Panasonic

Panasonic KX-TGP500 User manual

Panasonic

Panasonic KX-UTG200 User manual

Panasonic

Panasonic BBGT1540 - GLOBARANGE CORDLESS PHONE User manual

Panasonic

Panasonic JOIP BB-GT1540SP Setup guide

Panasonic

Panasonic KX-HDV230 User manual

Panasonic

Panasonic KX-TCA120EX User manual

Panasonic

Panasonic KXDT346 - DIGITAL PROPRIETARY TELEPHONE User manual

Panasonic

Panasonic KX-TG1611FX User manual

Panasonic

Panasonic KX-DT 333 Series User manual

Panasonic

Panasonic KX-T7630 User manual

Panasonic

Panasonic KX-TGP700 User manual

Panasonic

Panasonic KX-NT346 User manual

Panasonic

Panasonic KX-TDA5920 User manual

Panasonic

Panasonic KX-HDV100 Service manual

Panasonic

Panasonic KX-NCS1101 User manual

Panasonic

Panasonic KX-HDV230NE User manual

Panasonic

Panasonic KX-NT265 User manual

Panasonic

Panasonic T-Mobile KX-HDV130 User manual

Panasonic

Panasonic KX-NT343 User manual

Panasonic

Panasonic KX-HGT100-B User manual

Panasonic

Panasonic KX-UT113 User manual

Popular IP Phone manuals by other brands

Alcatel

Alcatel 4028 manual

Polycom

Polycom Polycom VVX 600 quick reference

Polycom

Polycom SoundPoint IP 450 datasheet

Cisco

Cisco SPA-500 Series user guide

Polycom

Polycom SoundPoint IP 650 user guide

Proximus

Proximus Maestro 3016 IP quick start guide

Fanvil

Fanvil X4 user manual

Cisco

Cisco 7962 user guide

Snom

Snom 320 quick start guide

Yealink

Yealink Yealink SIP-T46G Guide

Avaya

Avaya 4625SW user guide

Yealink

Yealink SIP-T52S quick start guide

Nortel

Nortel 1140E Getting started

Nexotek

Nexotek NT-P500 user manual

Avaya

Avaya Integral 5 R3.0 user guide

GE 28320EE2 - Dect 6.0 InfoLink 2 user guide

Avaya

Avaya 4600 Series Administrator's guide

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP user guide