Panasonic PSCFV11VH2 User manual

III

Maintenance (Cleaning)

Maintenance (Replacement of lamp)

Model No. FV-11VH2

FV-11VHL2

Ventilating Fan

Thank you very much for having purchased our Ventilating Fan.

FV-11VH2 FV-11VHL2

back cover

The Panasonic ceiling mount ventilating fans uses a sirocco fan driven by a capacitor motor. The motor is

designed to have an extended service life with reduced energy consumption. It also incorporates a

thermal cut-off for safety. The grille covering the main body is a spring-loaded, quick-release type. A

damper for preventing counterflow is provided. The blower uses a high-capacity sirocco fan developed to

reduce the noise level.

The heater for this unit is a 1400 W sheathed heater. A thermostatand thermal cut-off switch have been

added for safety in case of an abnormal temperature rise in the heater.

The lighting unit is an energy-saving, lighting device which uses two 18 W fluorescent lamps and produces

almost the same illumination as a standard 100 W incandescent lamp (FV-11VHL2).

UNPACKING

SUPPLIED ACCESSORIES

DESCRIPTION

Unpack and carefully remove unit from carton.

Refer to the Supplied Accessories list to verify that all parts are present.

FOR MODEL FV-11VH2

POURLE MODELE FV-11VHL2

Ventilating unit

DIMENSIONS

2 1/8 (54.8)

14 (357.8)

18 1/8 (460)

2 1/2 (62)

11 7/8 (301)

13 1/4 (337.8)

7 5/8 (195) 5 (128.7)

11 1/4 (285.5)

18 1/8 (460)

7 3/4 (196)

1 (25)

16 (407)

19 1/2 (497)

16 (407)

11 1/4 (285.5)

5 (128.7)

7 3/4 (196)

7 5/8 (195)

2 1/2 (62)

11 7/8 (301)

1540

3. This product must beproperly grounded.

Noise

Vent

(sone)

0.6

0.7

Only for FV-11VHL2.

AC 120V, 60Hz.

SPECIFICATIONS

GENERAL SAFETY INFORMATION

650

720

29.5

Exhaust &

Circulation

10. This product (FV-11VHL2) has a fluorescent lamp that contains mercury. Disposal may be regulated in your

community due to environmental considerations. For disposal or recycling information, please contact your

local authorities or the Electronics Industries Alliance:http://www.eiae.org

Vent (0.1" WG)

(cfm)

8. Make sure that all duct work is properly vented.

9. DO NOT INSTALLTHIS UNIT OVER ABATHTUB OR SHOWER ENCLOSURE.

15.6

(7.1)

17.8

(8.1)

GENERAL SAFETY INFORMATION CONTINUED

Circulating fan unit

Red

White

Black

Motor(C)

White

Thermal cut-off

(230 F (110C))

Heater

(1400W)

Thermostat

(140 F (60C))

Fuse

(20A)

Ventilating fan unit

Red

White

Black

Motor(V)

Capacitor

Black

White

Black

Junction box

Green

Earth ground Power Supply

AC120V 60Hz

Switch(not

included)

Switch(not

included)

WIRING DIAGRAM

WARNING:

To reduce the risk of fire, electric shock or injury to persons, observe the following:

Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact

the manufacturer.

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable

codes and standards, including fire-rated construction. Neither unauthorized modification, repair nor

disassembly is allowed.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel

buming equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and

safety standards such as those published by the National Fire Protection Association (NFPA), and the

American Society for Heating Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code

authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

Solid state controls may cause harmonic distortion which can cause motor humming noise. To reduce the

risk of fire or electric shock, do not use this unit with any solid-state control device.

Never place a switch where it can be reached from a tub or shower.

Not to be installed in a ceiling thermally insulated to a value greater than R40. (This is required for

installation in Canada only.)

Use only on 20 ampere branch circuit.

Before servicing or cleaning unit, switch power off at service panel and lock panel cabinet to prevent

power from being switched on accidentally. If the panel cabinet cannot be locked, securely fasten a

clearly visible warning label to the service panel.

PCB

OFF

Black

Power Supply

AC120V 60Hz

Circulating fan unit

Motor(C)

Earth ground

Junction box

Motor(V)

Ventilating fan unit

OFF

PCB

Red

White

Black

White

Black Fuse

(20A) Thermal cut-off

(230 F (110C))

Heater

(1400W)

Thermostat

(140 F (60 C))

Lighting unit

Fluorescent lamp

Electronic

ballast

White

Black

Fuse

(3.15A)

Red

White

Black

Capacitor

Night lamp

Black

White

Black

White

Black

White

Green

Switch(not

included)

Power Supply

AC120V 60Hz Power Supply

AC120V 60Hz

Switch(not

included)

Switch(not

included)

Fig.2-2

Fig.2-1

(Fig.3)

Fig.2-3

Illustrations in this manual common use the image of

FV-11VHL2, and mark for FV-11VHL2 only, others are

same for FV-11VH2.

INSTALLATION (JOIST MOUNTING- )

Fig.3

Fan body

Suspension

bracket

Suspension

bracket

Suspension

bracket Suspension

bracket

Fan body

Suspension

bracket

Suspension

bracket Suspension

bracket

Fan body

Joist

4 Long screws (ST4.2X20)

2 Screw (ST4.2X8)

Suspension bracket

2. Insert the suspension bracket into the fan body.

(Select the suspension bracket as shown below.)

Fig.1

Tape

Fan body

Warning label

Fig.4-2

Joist

2 Long screws

(ST4.2X20)

Screw

(ST4.2X12)

Joists

16 inches and 19.2 inches

horizontal joists

Fig.4-1

16 inches and 19.2 inches

horizontal joists refer to Fig.4-1, 19.2 inches vertical

joists and 24 inches refer to Fig.4-2.

Joist

2 Long screws

(ST4.2X20)

Screw

(ST4.2X12)

1. Before installation, remove warning lable and the tape

that is securing the adapter and the damper. (Fig.1)

6. Refer to wiring diagram (Page.5)

Follow all the local electrical safety codes. As well as

the National Electrical Code (NEC).

Using UL approved wire nuts, connect house power

wires to ventilating fan wires (Fig.6):

Black to black; white to white; green to green.

Make sure all connections are fastened firmly after

wiring is finished.

Replace the junction box plate, and then replace

lighting cord to hook. (Fig.5)

Fig.10

Fig.9

Fig.8

Fig.5

8. Finish ceiling work. Ceiling hole should be aligned

with the edge of the flange. (Fig.8)

(Fig.10)

INSTALLATION (JOIST MOUNTING- ) CONTINUED

7. Install the circular duct (4 inches) to the adaptor and

secure it with duct tape or clamps. (Fig.7)

Fig.7

Circular duct

Conduit

Correct

Incorrect

9. Install the fluorescent lamps and then install the

night lamp. (Fig.8)

Fluorescent lamp

12 5/8 (319)

17 3/8 (441)

Screw driver

Fig.6

Junction box plateBlack to black

White to white

Black to black

White to white

Black to black

Junction box

Green to green

Wire nut

Fan body

Joist

4 Long screws (ST4.2X20)

Slot Mounting spring

Grille

Switch

labels Switch

labels

For Model FV-11VHL2 For Model FV-11VH2

Note:Do not mount grille and springs conversely. If

the grille is mounted in the opposite direction,

the grille can not be fitted to the ceiling, so

then reverse the grille position and try to

mount again.

10. Insert mounting springs into slots as shown and

mount grille to fan body. (Fig.9)

Duct tape

or clamps

Screw

Junction box

plate

5. Remove the lighting cord out from hook (FV-11VHL2),

then remove junction box plate and secure conduit or

stress relief to wiring box knock-out hole.(Fig.5)

Lighting cord

Hook

Conduit

Night lamp

Fig.11

Fig.12

Fig.11

Illustrations in this manual common use the image of

FV-11VHL2.

INSTALLATION (BETWEEN JOIST MOUNTING)

Suspension

bracket

Suspension

bracket Suspension

bracket

Fan body

Joists

Adaptor

Junction box

Suspension bracket

(Select the suspension bracket according to spacing A

as shown below.)

Spacing A on center joists

16 inches

19.2 inches horizontal joists

19.2 inches vertical joists

13 1/4 ~ 15 1/2 (336~394)

14 3/4 ~ 16 3/4 (374~425)

16 1/2 ~ 18 3/4 (419~476)

1. Before installation, remove warning lable and the tape

that is securing the adapter and the damper. (Fig.1)

Keep the distance C (1/2 inch, 12.7 mm) for the

thickness of ceiling board.

Fig.15

Fig.16

(Fig.15, Fig.16)

INSTALLATION (WOODEN HEADER INSTALLATION)

113/8 (290)

19 7/8 (505)

Adaptor

Fan body

Ceiling joist

Header

Adaptor

Circular

duct

Long screw (ST4.2X20)

4. Follow step 5 of installation (page 7) to complete the

installation work.

1. Before installation, remove warning lable and the tape

that is securing the adapter and the damper. (Fig.1)

INSTALLATION (BETWEEN JOIST MOUNTING) CONTINUED

Fig.13, Fig.14

Fig.14

6. Follow step 5 of installation (page 7) to complete the

installation work.

Fig.13

Fig.14

Joist

2 Long screws

(ST4.2X20)

4 Long screws

(ST4.2X20)

Joist

2-Screw

(ST4.2X12)

Fig.17

Fig.18

Fig.19

Fig.20

Fig.17

Fig.18

Fig.19

Fig.20

60 C(140 F).

MAINTENANCE (CLEANING)

Slot

Mounting spring

Grille

Gloves

Vacuum cleaner

5. Replace grille.

Do not allowany water toget into themotor.

This manual suits for next models

Table of contents

Other Panasonic Fan manuals

Panasonic

Panasonic FV-05VF2 User manual

Panasonic

Panasonic WhisperGreen FV-08VKML3 User manual

Panasonic

Panasonic FV-10VEC1 User manual

Panasonic

Panasonic RG-R811HA User manual

Panasonic

Panasonic Whisper-Lite FV-15VQL4 User manual

Panasonic

Panasonic FY-150ZDY8 User manual

Panasonic

Panasonic FY-3009U1 User manual

Panasonic

Panasonic F-M15EX User manual

Panasonic

Panasonic FV-0511VQ1 User manual

Panasonic

Panasonic FV-11VFL2 User manual

Panasonic

Panasonic WhisperSense FV-08VQCL5 User manual

Panasonic

Panasonic WhisperSense FV-08VQCL6 User manual

Panasonic

Panasonic FV-40BE2H User manual

Panasonic

Panasonic FV-08VFL2 User manual

Panasonic

Panasonic FV-06VE1 User manual

Panasonic

Panasonic Whisper Green FV-08VKM1 Quick start guide

Panasonic

Panasonic FV-051OVSCL1 User manual

Panasonic

Panasonic WhisperGreen FV-08VKML3 User manual

Panasonic

Panasonic Whisper Value-Lite FV-08VSL1 User manual

Panasonic

Panasonic FV-08VKML4 User manual

Panasonic

Panasonic FV-0511VQ1 User manual

Panasonic

Panasonic FV-1115VQ1 User manual

Panasonic

Panasonic FV-11VH1 User manual

Panasonic

Panasonic F-60DHN User guide

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

Litex Industries

Litex Industries E-CGL52CB5C1 installation guide

Lindab

Lindab LTDF installation instructions