Panasonic G600 Quick start guide

http://cxema.ru

Order Number: MCUK980101G8

Technical Guide

G600 Personal Cellular Telephone Handheld portable

EB-G600

Car mount k t

EB-HF600Z

Easy f t car mount k t

EB-HF600Z

Dual charger

EB-CR600

Issue 1

Rev s on 0

http://cxema.ru

Th s Techn cal Gu de s copyr ght and ssued on the str ct understand ng that t s not to be reproduced, cop ed, or

d sclosed to any th rd party, e ther n whole or part, w thout the pr or wr tten consent of Matsush ta Commun cat on

Industr al UK Ltd.

Every care has been taken to ensure that the contents of th s manual g ve an accurate representat on of the

equ pment. However, Matsush ta Commun cat on Industr al UK Ltd. accepts no respons b l ty for naccurac es that

may occur and reserves the r ght to make changes to spec f cat on or des gn w thout pr or not ce.

The nformat on conta ned n th s manual and all r ghts n any des gns d sclosed there n, are and rema n the

exclus ve property of Matsush ta Commun cat on Industr al UK Ltd.

Other patents apply to mater al conta ned n th s publ cat on:

BULL CP8 PATENTS

Comments or correspondence concern ng th s manual should be addressed to:

Customer Support Department,

Matsush ta Commun cat on Industr al UK Ltd.,

Colthrop,

Thatcham,

Berksh re. RG19 4ZD.

ENGLAND

Issue 1 MCUK980101G8

Rev s on 0 Techn cal Gu de

http://cxema.ru

MCUK980101G8 Issue 1

Techn cal Gu de Rev s on 0

TABLE OF CONTENTS

1 INTRODUCTION

1.1 Purpose of th s Gu de ..............................................1-1

1.2 Structure of the Gu de ..............................................1-1

2 INTERFACES AND TEST POINTS

2.1 Introduct on ...................................................2-1

2.2 Interfaces ....................................................2-1

2.3 Test Po nts ...................................................2-6

3 RF OVERVIEW

3.1 Introduct on ...................................................3-1

3.2 Funct onal Descr pt on..............................................3-1

4 TRANSMITTER

4.1 Introduct on ...................................................4-1

4.2 Funct onal Descr pt on..............................................4-2

5 RECEIVER

5.1 Introduct on ...................................................5-1

5.2 Funct onal Descr pt on..............................................5-2

6 BASEBAND OVERVIEW

6.1 Introduct on ...................................................6-1

6.2 Funct onal Descr pt on..............................................6-1

7 GEMINI

7.1 Introduct on ...................................................7-1

7.2 Funct onal Descr pt on..............................................7-1

8 VEGA

8.1 Introduct on ...................................................8-1

8.2 Funct onal Descr pt on..............................................8-1

9 POWER SUPPLIES

9.1 Introduct on ...................................................9-1

9.2 Overv ew ....................................................9-1

9.3 Power-up ....................................................9-2

9.4 Power-down ...................................................9-3

9.5 Power Management ...............................................9-4

10 ACCESSORIES

10.1 Handsfree Un t - C rcu t Descr pt on ......................................10-1

10.2 Dual Charger .................................................10-5

http://cxema.ru

WARNINGS AND CAUTIONS

WARNING

The equ pment descr bed n th s manual conta ns polar sed capac tors ut l s ng l qu d electrolyte. These dev ces

are ent rely safe prov ded that ne ther a short-c rcu t nor a reverse polar ty connect on s made across the

capac tor term nals. FAILURE TO OBSERVE THIS WARNING COULD RESULT IN DAMAGE TO THE

EQUIPMENT OR, AT WORST, POSSIBLE INJURY TO PERSONNEL RESULTING FROM ELECTRIC SHOCK

OR THE AFFECTED CAPACITOR EXPLODING. EXTREME CARE MUST BE EXERCISED AT ALL TIMES

WHEN HANDLING THESE DEVICES.

CAUTION

The equ pment descr bed n th s manual conta ns electrostat c sens t ve dev ces (ESDs). Damage can occur to

these dev ces f the appropr ate handl ng procedure s not adhered to.

ESD Handling precautions

A work ng area where ESDs may be safely handled w thout undue r sk of damage from electrostat c d scharge,

must be ava lable. The area must be equ pped as follows:

Working Surfaces - All work ng surfaces must have a d ss pat ve bench mat, SAFE for use w th l ve equ pment,

connected v a a 1M2 res stor (usually bu lt nto the lead) to a common ground po nt.

Wrist Strap - A qu ck release sk n contact dev ce w th a flex ble cord, wh ch has a bu lt n safety res stor of between

5k2 and 1M2 shall be used. The flex ble cord must be attached to a d ss pat ve earth po nt.

Containers - All conta ners and storage must be of the conduct ve type.

Batteries

Th s equ pment may conta ns an nternal battery n add t on to the external battery packs. These batter es are

re-cyclable and should be d sposed of n accordance w th local leg slat on. They must not be nc nerated, or

d sposed of as ord nary rubb sh.

Issue 1 v MCUK980101G8

Rev s on 0 Techn cal Gu de

http://cxema.ru

1 INTRODUCTION

1.1 Pu pose of this Guide

Th s gu de conta ns techn cal nformat on for the Panason c G600 personal cellular telephone system operat ng on

the GSM network. Procedures for nstall ng, operat ng and serv c ng (e.g. d sassembly and test ng) the telephone

system are prov ded n the assoc ated Serv ce Manual.

1.2 St uctu e of the Guide

The gu de s structured to prov de serv ce-eng neer ng personnel w th the follow ng techn cal nformat on on the

GSM mob le telephone:

1. Interface deta ls and relevant test po nts.

2. Funct onal descr pt on of each sect on of the mob le telephone.

3. Deta led descr pt on of each sect on of the mob le telephone.

MCUK980101G8 Sect on 1 Issue 1

Techn cal Gu de 1 - 1 Rev s on 0

INTRODUCTION

http://cxema.ru

2 INTERFACES AND TEST POINTS

2.1 Int oduction

Th s sect on prov des deta ls on connect ons between the RF and Baseband PCB and other nterfaces on G600.

2.2 Inte faces

. .1 Baseband and RF

Th s deta ls the 50-way connector between the RF and baseband PCB.

No. Signal Name Function Connection Status

1 BAT TEMP Battery Temperature

measurement s gnal

ADIN3 of VEGA(10b tAD)

2 CHARGE ON Charge control s gnal for

Dual Charger Extended I/O: Q(1) H:Charge On

L:Charge Off

3 GND

4 TX AUDIO TX AUDIO analogue

s gnal AUXIN of VEGA

5 RX AUDIO RX AUDIO analogue

s gnal AUXOUT of VEGA

6 GND

7 nADP SENSE Opt onal Adaptor

detect on s gnal

ADIN4 of VEGA(10b tAD)

8 nHF SENSE Handsfree connect on

sense s gnal IO(11) of GEMINI L:HF connected

H:HF d sconnected

9 LO2SEL 2nd Local Frequency

control s gnal TSPACT(4) of GEMINI L:RX 8 MON slot

H:TX slot

10 BUZZ- Buzzer control s gnal BUZZIN of Charge IC

11 BUZZ+ Buzzer control s gnal REGFB of Charge IC 6V MAX

12 SIM RST SIM Interface: Reset

s gnal SIM RST of GEMlNI Depends on SIM Card

13 SIM IO SIM Interface: I/O s gnal SIM I/O of GEMINI 3.25/372=8736.56baud

14 SIM CLK SIM Interface: Clock

s gnal SIM CLK of GEMINI 3.25MHz clock

15 TX ON Transm tter block power

control s gnal TSPACT(10) of GEMINI H:On, L: Off

16 PA ON PA power control s gnal TSPACT(11) of GEMINI H:On, L:Off

17 RF ON RF common block power

control s gnal TSPACT(5) of GEMINI H:On, L: Off

18 RX ON1 Rece ver block power

control s gnal1 TSPACT(6) of GEMINI H:On, L: Off

19 RX ON2 Rece ver block power

control s gnal2 TSPACT(7) of GEMINI H:On, L:Off

20 nRADIO_MUTE Rad o Mute control s gnal

for Car Extended I/O: Q(4) L: Rad o Mute

H – Z:Rad o Un-Mute

MCUK980101G8 Sect on 2 Issue 1

Techn cal Gu de 2 - 1 Rev s on 0

INTERFACES AND TEST POINTS

http://cxema.ru

No. Signal Name Function Connection Status

21 VIB_ON V brator control s gnal Extended I/O: Q(3) H: V brat on On

L: V brat on Off

22 nON_HOOK ON HOOK detect on

s gnal 10(9) of GEMINI H: Off Hook

L: On Hook

23 PA_RAMP RF Output power control

s gnal of PA APC of VEGA(5b tDA) 64 step

24 VBAT Battery Power Supply BAT

VOLT:ADIN1(10b tAD)

L -lON: 7.2V

N -MH: 4.8V

25 DCOUT 3.5V DC/DC output

power supply 3.44V ±5%

26 D5V 5.0V DC/DC output

power supply for SIM 5.0V ± 2.4%

27 EXT_PWR External Power Supply nEXT_PWR: lO(2) of

GEMINI 9.4V Max

28 VDD Power supply for V brator

29 GND

30 13MHZCLK 13MHz Ma n (Master)

Clock MCLK (more than 0.5V)

31 SERIAL_UP Ser al Interface (Upl nk) GEMINI USART(8251) Baud rate:115.2, 57.6,

38.4, 28.8, 19.2, 9.6(k)

32 IGNITION Ign t on sense s gnal nlGNITION: IO(4) of

GEMINI

H: Ign t on On, L(H – Z):

Ign t on Off

33 SERIAL_DOWN Ser al Interface

(Downl nk) GEMINI USART(8251) 8 b t, Even, 1 stop

34 nLOGIC_PWR H/H power sense s gnal

for Opt onal equ pment

LOGIC_PWR: lO(1) of

GEMINI

L: H/H Power On

H – Z: H/H Power Off

35 nHF_ON HF Aud o block control

s gnal

HF_ON: 10(3) of GEMINI L: HF Aud o On

H – Z: HF Aud o Off

36 BATID Battery Cell detect on

s gnal

BAT – ID :ADIN2 of

VEGA(10b tAD)

37 VREF_OUT Vega reference voltage

output s gnal for RF VMID of VEGA

38 DQX Downl nk nQ s gnal

39 DQ Downl nk Q s gnal

40 DIX Downl nk nl s gnal

41 Dl Downl nk I s gnal

42 GND

43 OCE Output Cancel Enable

s gnal

BCAL=TSPACT(l) of

GEMINI H: Enable

44 IFAGCEN IF AGC Enable s gnal for

RX IC TSPEN(4) of GEMINI H: Enable

L: D sable

45 PLL_STRB PLL ser al nterface

s gnal: Strobe TSPACT(9) of GEMINI H: Enable

L: D sable

46 PLL_SD PLL and AGC ser al

nterface s gnal: Data TSPDO of GEMINI

Issue 1 Sect on 2 MCUK980101G8

Rev s on 0 2 - 2 Techn cal Gu de

INTERFACES AND TEST POINTS

http://cxema.ru

No. Signal Name Function Connection Status

47 PLL_CLK PLL and AGC ser al

nterface s gnal: Clock TSPCLK of GEMINI

48 GND

49 UQX Upl nk nQ s gnal

50 UQ Upl nk Q s gnal

51 UI X Upl nk nl s gnal

52 UI Upl nk I s gnal

53 PL_CONT TX Power Level control

s gnal IO(6) of GEMINI H: TX PL5~1

L: TX PL12~19

54 VBAT Battery Power Supply BAT VOLT:

ADIN1(10b tAD)

L -ION: 7.2V

N -MH: 4.8V

55 DCOUT 3.5V DC/DC output

power supply 3.44V ± 5%

56 D5V 5.0V DC/DC output

power supply for SIM 5.0V ± 2.4%

57 EXT_PWR External Power Supply nEXT PWR: IO(2) of

GEMINI 9.4V Max

58 VDD Power supply for V brator AFC of VEGA (13b tDA)

59 GND

60 AFC TCVCXO Frequency

Control s gnal

MCUK980101G8 Sect on 2 Issue 1

Techn cal Gu de 2 - 3 Rev s on 0

INTERFACES AND TEST POINTS

http://cxema.ru

. . External Interface

G600 has 2 external connectors, a mult way connector for use w th a handsfree and data and add t onal contacts

for the charg ng the battery pack wh le n the desk top charger. Both nterfaces are electr cally and mechan cally

compat ble w th G600.

Hands ree and data connector (J001)

PIN Signal Direction

(from HH) Description

1 GND Power supply and d g tal s gnal ground

2 TX_AUDIO Input TX aud o

3 AUDIO_GND Aud o s gnal ground

4 nHF_ON Output Handsfree control s gnal

(Lo=ON, H -Zo=OFF)

5 nADP_SENSE Input Data adaptor select s gnal

6 SERIAL_UP Input UART up (9600, 33.8kbps)

7 SERIAL_DOWN Output UART down (9600, 33.8kbps)

8 EXT_PWR Input Power for charg ng

9 GND D g tal s gnal power supply ground

10 RX_AUDIO Output RX aud o s gnal (analogue)

11 nRADIO_MUTE Output Rad o mute

(Lo=mute, H -Zo=Not muted)

12 nHF_SENSE Input Handsfree select s gnal

(Lo=Handsfree mode)

13 nFLASH_WE /

PERF_PWR_ENBL Output Flash wr te enable and enable external per pheral

(Lo=Enable flash wr te)

14 IGNITION Input Cond t on of gn t on

(Lo=off, H =on)

15 nLOGIC_PWR Output Handheld state

(Lo=off, H =on)

16 PERF_PWR /

PA_ON Output Power ampl f er control s gnal and external per pheral

power supply

Charge Contacts

PIN Signal Description

20 EXT_PWR Power for charg ng

21 GND Ground

Issue 1 Sect on 2 MCUK980101G8

Rev s on 0 2 - 4 Techn cal Gu de

INTERFACES AND TEST POINTS

http://cxema.ru

Battery Contacts

PIN Signal Description

T TEMP Battery temperature sense

+ BATT + Battery pos t ve

- BATT - Battery negat ve

S SENSE Battery Type Sensor

SIM Inter ace

PIN SIGNAL

1 GND

25V

3 Not connected

4 Reset

5 Ser al nput/output

6 Clock

7 Not connected

8 Not connected

MCUK980101G8 Sect on 2 Issue 1

Techn cal Gu de 2 - 5 Rev s on 0

INTERFACES AND TEST POINTS

Other manuals for G600

This manual suits for next models

Table of contents

Other Panasonic Cell Phone manuals

Panasonic

Panasonic EB-H65 Series User manual

Panasonic

Panasonic EB-3238 Reference guide

Panasonic

Panasonic P342i User manual

Panasonic

Panasonic EBG60 - CELL PHONE User manual

Panasonic

Panasonic X400 User manual

Panasonic

Panasonic W61P User manual

Panasonic

Panasonic EB-GD95 User manual

Panasonic

Panasonic EB-GD90 User manual

Panasonic

Panasonic EB-GD35 User manual

Panasonic

Panasonic X60 User manual

Panasonic

Panasonic G70 User manual

Panasonic

Panasonic EBG51U - CELL PHONE User manual

Panasonic

Panasonic EB-3650 User manual

Panasonic

Panasonic EB-MX7 User manual

Panasonic

Panasonic Vodafone VS3 User manual

Panasonic

Panasonic Versio EB-TX320 User manual

Panasonic

Panasonic EB-GD93 User manual

Panasonic

Panasonic P-05D User manual

Panasonic

Panasonic LM-X440IM User manual

Panasonic

Panasonic EB-MX7 User manual

Panasonic

Panasonic W62P Installation guide

Panasonic

Panasonic EB-3901 User manual

Panasonic

Panasonic EB-G50 User manual

Panasonic

Panasonic X400 User manual

Popular Cell Phone manuals by other brands

Zte

Zte BLADE A520 quick start guide

Nokia

Nokia Lumia 620 user guide

Blackbe;rry

Blackbe;rry KEYone Safety and product information

Bea-fon

Bea-fon X5 Premium quick guide

Blackbe;rry

Blackbe;rry 8707 Series user guide

Blackbe;rry

Blackbe;rry Storm Troubleshooting

LG LM-X420QN user guide

LifeWatch

LifeWatch V user guide

Bea-fon

Bea-fon SILVER LINE SL860 user guide

IKI Mobile

IKI Mobile KF4.5i user manual

Hitech

Hitech HT-850 user guide

Yezz

Yezz Fashion F10 user manual

Point Mobile

Point Mobile PM60 user manual

Blackbe;rry

Blackbe;rry Q10 user guide

Blackbe;rry

Blackbe;rry Bold 9900 user guide

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 user guide

LG LM-K420EMW user guide

ISAFE MOBILE

ISAFE MOBILE IS655.2 operating manual