Panasonic PUM8 User manual

INDOOR CAMERA HOUSING BRACKETS AND MOUNTS

Indoor Plastic Camera Mount

Model Includes: PUM8

DESCRIPTION:

A 6" injection molded off-white Lexan®plastic bracket for indoor use. The bracket is designed to support a CCTV camera with

maximum camera length of 8" for wall mount or ceiling mount environments. The camera mount has full pan/tilt capabilities and

can be adapted quickly and easily for a wall or ceiling mount application.

FEATURES:

• Attractive styling

• Wall or ceiling mount with quick and easy set-up

• Convenient cable access slot

• Pan/tilt adjusts with grip-tight knobs

• Hole covers for concealing mounting hardware

Installation and

Operating Instructions

Manufactured by:

for

Before attempting to connect or operate this product,

please read these instructions completely.

81-IN3042-9922

- 2 -

SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instructions

should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating

instructions should be adhered to.

4.FollowInstructions-Alloperatinganduserinstructions should

be followed.

5. Electrical Connections - Only a qualified electrician should

make electrical connections.

6.Attachments-Donotuseattachmentsnotrecommendedbythe

product manufacturer as they may cause hazards.

7.CableRuns -Allcablerunsmustbewithinpermissibledistance.

8. Mounting - This unit must be properly and securely mounted to

a supporting structure capable of sustaining the weight of the

unit. Accordingly:

a. The installation should be made by a qualified service

person and should conform to all local codes.

b. Care should be exercised to select suitable hardware to

install the unit, taking into account both the composition

of the mounting surface and the weight of the unit. Be

sure to periodically examine the unit and the supporting

structure to make sure that the integrity of the

installation is intact. Failure to comply with the foregoing

could result in the unit separating from the support

structure and falling, with resultant damages or injury to

anyone or anything struck by the falling unit.

UNPACKING

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace it

properly in its carton and notify the shipper.

Be sure to save:

1.The shippingcartonandpackagingmaterial. Theyarethe

safest material in which to make future shipments of the

equipment.

2. These Installation and Operating Instructions.

SERVICE

ForserviceonPanasonic/Videolarmequipmentcantact:

Panasonic Technical Center

54 West Guide Dr.

Rockville MD 20850-1150

Phone: 301-762-5125

Fax: 301-251-0347

1-800-528-6747

9:00 AM - 5:00 PM EASTERN TIME

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK, DO NOT EXPOSE

COMPONENTS TO WATER OR MOISTURE.

Thelightningflashwithanarrowheadsymbol,

within an equilateral triangle, is intended to

alerttheusertothepresenceofnon-insulated

"dangerous voltage" within the product's

enclosurethatmaybeofsufficientmagnitude

toconstituteariskofelectricshocktopersons.

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

PANASONIC TECHNICAL SUPPORT

CAUTION

RISK OF

ELECTRIC SHOCK!

- 3 -

Indoor Plastic Camera Mount - PUM8

General Instructions:

Note: Mounting hardware for bracket is not supplied.

1. Carefully remove all equipment from the box.

2. If camera bracket is to be mounted on a wall: (Note: Bracket

is shipped assembled for wall mounting applications.)

A. Place the bracket against a flat surface in the desired

location. Mark the location using the three mounting holes.

B. Remove the bracket and drill a cable access hole

approximately in the center of the three marked mounting

holes.

C. Next, run the cable from the wall through the cable

access hole on the bracket body (See Fig. 1). Using the (3)

three marks from the previous step, mount the bracket to

the wall using appropriate fasteners.

D. Be sure the bracket is firmly affixed to the surface and

replace the (3) three hole covers (See Fig. 2).

E. Using the 1/4-20 screw (I) on the tilt mount (D) attach a

camera with a maximum camera length of (8) eight

inches (Fig. 3). Complete all electrical connections with

the camera.

F. Adjust the pan/tilt capabilities of the bracket with the (2)

two knobs, one for panning (H) and one for tilting (F) (Fig.

4). Tighten both knobs when desired viewing angle is

achieved.

3. If Camera Bracket is to be ceiling mounted:

H. Follow steps A-C. Once the cable access hole is drilled in

the ceiling, loosen the panning knob so the pan mount (E)

and tilt mount are released from the front cover (C) (Fig. 5).

I. Take front cover off the bracket body (Fig. 6). Replace the

front as shown (Fig. 7). Reattach the pan mount and tilt

mount to the front cover by tightening the panning knob.

J. Follow steps D-G.

Hole covers

F Tilt knob

H Pan knob

C Front cover

I 1/4-20 Screws

D Tilt mount

C Front cover

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

J Security tool

B Hole covers A PUM8

E Pan mount

C Front cover

Maximum weight for camera/lens: 3 lbs.

- 4 -

Description Part number

Qty.

A PUM8 Bracket Body 30-VL1332 1

B Hole Covers 30-VL1334 3

C Front Cover 30-VL1333 1

D Tilt Mount 30-VL1336 1

E Pan Mount 30-VL1335 1

F Tilt Adjustment Knob 30-VL1337 1

G Pan Adjustment Knob 30-VL1476 1

H 1/4-20x1/2" Screw 90-BTSRO1 1

I O-ring 96-RSORNG 1

Figure 7

Other Panasonic Camera Accessories manuals

Panasonic

Panasonic WV-CS1S User manual

Panasonic

Panasonic LJ-SK56A User manual

Panasonic

Panasonic AK-HDC931 User manual

Panasonic

Panasonic WV-7150D User manual

Panasonic

Panasonic DMW-USBC1 User manual

Panasonic

Panasonic WV7110A - MONITOR User manual

Panasonic

Panasonic WV-7130D User manual

Panasonic

Panasonic WV7230 - CCTV ACCESSORIES User manual

Panasonic

Panasonic VW-BTA1 User manual

Panasonic

Panasonic WVQ169 - CCTV CEILING MOUNT BRACKET User manual

Panasonic

Panasonic AWRP120GJ User manual

Panasonic

Panasonic AGVF5P - 1.5" B&W VIEWFINDER User manual

Panasonic

Panasonic Lumix DMW-MCTZ30 User manual

Panasonic

Panasonic BB-HGW700A - Network Camera Router User manual

Panasonic

Panasonic WV-716OD User manual

Panasonic

Panasonic WV-Q160C User manual

Panasonic

Panasonic WV-40 User manual

Panasonic

Panasonic HHR380A User manual

Panasonic

Panasonic AW-LZ17MD9AG User manual

Panasonic

Panasonic Lumix DMW-BGG9 User manual

Panasonic

Panasonic WV-CS4SA User manual

Panasonic

Panasonic Lumix TZ7 User manual

Panasonic

Panasonic AG-CVF10G User manual

Panasonic

Panasonic LC-P0612P User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions