Panasonic AY-PB2003 User manual

UC1AO

14A

PROFESSIONAL JOG PAD

ROM KIT

AY-PB2003

Before attempting to connect or operate this product,

please read these instructions carefully.

This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la

norme NMB-003 du Canada.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead sym-

bol, within an equilateral triangle, is

intended to alert the user to the pres-

ence of uninsulated "dangerous voltage"

within the product's enclosure that may

be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the appli-

ance.

The information marking of this product may be found on the

bottom of the unit.

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No.

Serial No.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PER-

SONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SA 1965

SA 1966

For CANADA

NOTE: This equipment has been tested and found to com-

ply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference

when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to cor-

rect the interference at his own expense.

For U.S.A

PREFACE

The ROM in this package is for exclusive use with the

professional jog pad in the non-linear workstation WJ-

MX1000 and WJ-MX1200 series. Be sure to use the

application software version 4.2 or later version.

Before replacing the ROM, install the software of

Version 4.2 or higher.

Connect the professional jog pad after replacing the

ROM.

If you do not have the professional jog pad AY-JP2000,

it is not necessary to replace the ROM.

Important

• Before replacing the ROM, be sure to press the

power switch off and pull out the power plug

from the electrical outlet.

• Before handling the board, touch a metal part of

it with your hand to discharge static from your

body. Touching the board while you still have

static in your body may cause the board to fail.

It would be safer to wear an antistatic wrist

strap.

• When it is necessary to temporarily place the

board, put it on an antistatic mat or the like. Do

not let any metal part of the board contact the

metal parts of other boards.

-3-

-4-

UC1AO

14A

Lock Lever

Pull the lever to

release the board.

Press the lever to

lock the board.

Hook Button

eLoosen the screws and remove the

protection cover. (Be careful not to lose

the screws.)

qSwitch power off

and pull out the

power cable plug.

wPush the hook button

down and remove the

front panel.

rRemove the input board

(the second one from the bottom).

Protection

Board

Front Panel

BOARD REMOVAL

qQuit system operation, switch power off, and pull

out the power plug from the electrical outlet. Be

sure to read the Installation Manual for the Main Kit

(WJ-MX1000 and WJ-MX1200 series) for how to

quit system operation.

wPush down the hook button on the right and left

sides of the main unit and remove the front panel.

eLoosen the screws and remove the protective

cover. Be careful not to loose the screws.

rRemove the second board from the bottom (input

board).

Note: Some models have a fan mounted on the protec-

tion board. Exercise good care about the wires

when removing the board.

-5-

Fig. 2Fig. 1

There is the danger of damaging the ROM if the

remover is not fully inserted.

[How to Use Remover]

Insert the hooks at the ends of the remover into the two

diagonally located holes in the ROM socket as shown in

Figure 1, and grip the remover as shown in Figure 2.

* Never forcibly pull the remover upwards.

The ROM can be removed by lifting it out of the socket.

Mark the removed ROM with red ink, for example, so it

will not be mistaken for a new ROM.

Replacing the ROM

tWith the shielding plate down, place the removed

input board on an antistatic mat or the like, and

remove the ROM from the input board.

Caution: Insert the hooks at the ends of the remover all

the way in, then pull out the ROM.

Hook

UC1AO

14A

yPlace a new ROM in the socket. Check the direc-

tion of the mark for pin 1 so that the ROM will be

inserted in the correct direction, keep the ROM

level, apply an even force on the ROM taking care

not to bend the pins, and insert it fully till it clicks.

-6-

Mark for pin 1

BOARD MOUNTING

uPull the board tabs toward yourself and insert the

removed board into its original position. Push the

tabs to fasten the board. Be sure to push the tabs

all the way.

iFasten the protective cover with the screws.

oPush down the hook buttons on the right and left

sides of the main unit.

!0 Hold the front panel where it should be, then mount

it back. The hook buttons come up to fasten the

front panel.

!1 Make sure that the front panel is securely fastened.

!2 Insert the power plug back into the electrical outlet,

and switch power on. Check that the system is

started.

Be sure to read the Installation Manual for the Main

Kit (WJ-MX1000 and WJ-MX1200 series) for how to

start the system.

Accessories

Remover ...................................................................... 1

Warranty ...................................................................... 1

-7-

NM0499-1069 7J1A339B Printed in Japan

PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY

DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA

Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068

(323) 436-3500

EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621

Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621

Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024

(770) 338-6845

Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200

WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500

Dallas Region: 6226 Abington Way, Houston, TX 77008 (713) 802-2726

Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840

PANASONIC CANADA INC.

5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 (905) 238-2115

PANASONIC SALES COMPANY

DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.

San Gabriel Industrial Park, 65th Infantry Ave., KM9.5 Carolina, Puerto Rico 00630 (809) 750-4300

Table of contents

Other Panasonic Accessories manuals

Panasonic

Panasonic WV-PB5508 User manual

Panasonic

Panasonic HG-T Series User manual

Panasonic

Panasonic MA2YF80 User manual

Panasonic

Panasonic KX-HNS105C User manual

Panasonic

Panasonic HG-S Series User manual

Panasonic

Panasonic Light Emitting Diodes LNJ024X4ARA1 User manual

Panasonic

Panasonic KX-HNS104C User manual

Panasonic

Panasonic TY-TPEN6 - Stylus - Wireless User manual

Panasonic

Panasonic MA3S781DG User manual

Panasonic

Panasonic MA3SD29FG User manual

Panasonic

Panasonic Schottky Barrier Diodes MA2Z7840G User manual

Panasonic

Panasonic PE Series User manual

Panasonic

Panasonic CY-11A User manual

Panasonic

Panasonic MA2S077G User manual

Panasonic

Panasonic MA24F41 User manual

Panasonic

Panasonic MA2JP02 User manual

Panasonic

Panasonic MA3D755 (MA7D55) User manual

Panasonic

Panasonic SL-CH22 User manual

Panasonic

Panasonic NN-SD767 User manual

Panasonic

Panasonic ECONAVI CZ-CENSC1 User manual

Panasonic

Panasonic HL-C211BE User manual

Panasonic

Panasonic CA-LSR10U - Sirius Satellite Radio Receiver User manual

Panasonic

Panasonic MA3D749 User manual

Panasonic

Panasonic MA3D750 User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit instruction manual