Pace TD-100 User manual
www.paceworldwide.com
Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com
Process Guide I-QFP-02
QFP Installation
Mini Wave
Equipment Required
PACE Intelliheat®Power Supply
TD-100 Thermo-Drive®Soldering Iron
Mini-Wave®Tip (See Chart on Back)
Tip Tool
HP-65 HandiPik®
Optional Equipment
Tweezer
Materials
Flux-cored Solder
Flux
Cleaner
Procedure
1. Set a tip temperature of 343°C (650°F) for lead-free
or 316°C (600°F) for leaded alloys and adjust as
necessary.
2. Install selected Mini-Wave®tip into the TD-100 using
Tip Tool.
3. Position the component ensuring proper lead-to-land
alignment. Hold the component in place using the
HandiPik®or tweezers.
4. Apply flux and tack solder opposing corner leads.
5. Apply flux to ALL lead/land areas.
6. Clean tip on Tip & Tool Stand sponge.
7. Apply solder to the cupped portion of tip to create a
convex bead of molten solder.
8. Position Mini-Wave®tip so the solder bead contacts
the top portion of leads. Slowly move tip over one row
of leads to form proper solder fillets at each joint.
9. Repeat steps 6 through 8 on remaining sides of
component.
10. Re-tin Mini-Wave®tip with solder. Return TD-100 to
its Tip & Tool Stand.
11. Clean, if required, and inspect.
A
A
B
C
Position Component
C
Flux Leads
B
Tack Lead
D
Fill Tip
© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly
(001) 910-693-8620 (USA) 877-882-7223
TD-100
D
E
E
Solder Component
Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com
Process Guide I-QFP-02
TD-100 Tips
© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly
(001) 910-693-8620 (USA) 877-882-7223
Tips Description Tip Size - L Size - D Part Number
MiniWave®N/A 3.05mm (.120") 1124-0032-P1
Angled MiniWave®N/A 3.05mm (.120") 1124-0033-P1
Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1
Angled MiniWave®N/A 2.11mm (.083") 1124-0035-P1
Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1
Angled MiniWave®, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1
MicroFine Single Sided Chisel N/A 0.9mm (.035") 1124-0040-P1
MicroFine Single Sided Chisel N/A 1.1mm (.045") 1124-0041-P1
Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1
Micro-Wave N/A 1.1mm (.045") 1124-0046-P1
Single Sided Chisel 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1
MiniWave®N/A 2.79mm (0.110") 1124-0049-P1
Other manuals for TD-100
3
Other Pace Soldering Gun manuals
Pace
Pace 20A Manual
Pace
Pace Sodr-X-Tractor SX-80 User manual
Pace
Pace ADS200 User manual
Pace
Pace SODRTEK ST 325 User manual
Pace
Pace ST 40A Manual
Pace
Pace SX-100 User manual
Pace
Pace PRC 2000 Manual
Pace
Pace MBT360 User manual
Pace
Pace MBT250E-SDSoftGround Instruction manual
Pace
Pace 5050-0552 User manual
Popular Soldering Gun manuals by other brands
Velleman
Velleman HRJA151 user manual
Weller
Weller WSM 1 operating instructions
Vishay Precision Group
Vishay Precision Group Micro-Measurements Mark V Operating and maintaining
ersa
ersa i-CON 1V quick guide
Hakko Electronics
Hakko Electronics FX-100 instruction manual
Weller
Weller WAD 101 operating instructions
