Pablo TALIA Configuration guide
TALIA
TABLE & FLOOR
ASSEMBLY INSTRUCTIONS AND USER GUIDE
INFO@PABLODESIGNS.COM
888 MARIN STREET
SAN FRANCISCO, CA
94124
PABLODESIGNS.COM
TALIA
pg. 2
FEATURES
WIRELESS CHARGING ZONE
NOTE: TABLE MODEL ONLY
FULL RANGE OPTICAL SWITCH
TAP OPTICAL SWITCH BRIEFLY TO CYCLE THROUGH HIGH (100%), LOW
(40%), AND OFF. PRESS AND HOLD OPTICAL SWITCH TO ACTIVATE FULL
RANGE DIM CONTROL (RELEASE WHEN DESIRED LEVEL IS REACHED).
6 HOUR AUTO OFF SETTING
WHILE LIGHT IS TURNED OFF, PRESS AND HOLD SWITCH FOR 6
SECONDS UNTIL THE LIGHT FLASHES ONCE. THEN PRESS THE SWITCH
AGAIN TO TURN ON. THE LIGHT POWERS OFF AFTER 6 HOURS. NOTE:
TO DISABLE AUTO-SHUTOFF, REVERSE PROCEDURE.
NOTE: CENTER DEVICE CHARGE
COIL OVER LINE SYMBOL FOR
BEST RESULT.
TALIA
pg. 1
ASSEMBLY
LOCATING FEATURE
PUSH AND TWIST PLUG INTO
POWER SUPPLY.
PUSH BUTTON TO REMOVE PLUG.
CONNECT LAMP CORD TO
POWER SUPPLY.
TALIA
pg. 3
ADJUSTABILITY
SINGLE 5.0V USB OUTPUT SUPPORTS CHARGING FOR SMARTPHONES,
TABLETS AND OTHER MOBILE DEVICES. USB CORD NOT INCLUDED.
OUTPUT VOLTAGE: 5VDC + - 5%
OUTPUT CURRENT: 1A MAX
TALIA WILL CONTINUE TO CHARGE YOUR MOBILE DEVICE EVEN WHEN
LAMP IS IN THE ‘OFF’ POSITION. PLEASE REFER TO YOUR MOBILE
DEVICE’S USER MANUAL FOR COMPATIBILITY AND CHARGING TIME.
PLEASE REFRAIN FROM LEAVING YOUR DEVICE PLUGGES IN FOR
LONGER THAN THE RECOMMENDED TIME, OTHERWISE IS MAY RESULT
IN OVER CHARGING.
WIPE CLEAN WITH A SOFT DAMP CLOTH.
AVOID AMMONIABASED CLEANERS
INFO@PABLODESIGNS.COM
888 MARIN STREET, SAN FRANCISCO, CA 94124
PABLODESIGNS.COM
USB SPECIFICATIONS
CARE INSTRUCTIONS
USB
TALIA
pg. 4
Other Pablo Home Lighting manuals
Pablo
Pablo T.O Table & Floor User manual
Pablo
Pablo LIM360 Programming manual
Pablo
Pablo Superlight Programming manual
Pablo
Pablo CAROUSEL User manual
Pablo
Pablo CAROUSEL User manual
Pablo
Pablo Corner Office Programming manual
Pablo
Pablo LIM360 Programming manual
Pablo
Pablo Lana A Programming manual
Pablo
Pablo PIXO+ Programming manual
