OWC Envoy Instructions for use
OWC Envoyfor MacBook Air 2012
Owner’s Manual & Assembly Guide
OWC Envoy Assembly
Remove the top cover and you will expose the interposer board inside of the OWC
Envoy.
Insert your SSD module into the interposer board connector - it is keyed so it will only
t one direction. The drive module plugs straight into the connector and ts snugly.
Replace the bottom cover onto the OWC Envoy. Reinsert the 2 Phillips screws through
the bottom and apply the 2 rubber feet to complete the assembly.
Your OWC Envoy connects using the included USB cable. if your SSD module is unfor-
mated, you will need to format it to be able to use it.
http://eshop.macsales.com/tech_center/fwhdd.cfm
Copyright ®2012 Other World Computing All Rights Reserved. Other World Computing’s Limited Warranty is not transferable and subject to limitations.
OWCMANENV12OGAM
R1 11/7/12 JD
OWC Envoy Introduction
1.1 System Requirements
1.1.1 Mac Requirements
• Minimum PowerPC G4 CPU, 128MB RAM
• USB 3.0/2.0 interface, Mac OS X 10.2 or later
1.1.2 PC Requirements
• Minimum 500MHz Intel Pentium III CPU, 128MB RAM
• USB 3.0/2.0 interface, Windows 2000 / XP / Vista / Windows 7 / Windows 8
1.1.3 Supported SSD Drives
• MacBook Air 2012 SSD
• OWC Aura Pro SSD for the 2012 MacBook Air
➀ ➁
➂
➃
Item
➀ USB 3.0 (A - Micro-B) cable
➁ OWC Envoy
➂Adhesive Rubber Feet
➃ Plush Storage Bag
➄ Owner's Manual & Assembly Guide
OWC Envoyfor MacBook Air 2012
Owner’s Manual & Assembly Guide
➄
OWC Envoy Assembly
Your computer is a static-sensitive device. It is susceptible
to invisible damage if not protected during installation.
We recommend proper grounding by using a grounding
strap. Make sure to work in a clean and static-free area,
and avoid wearing clothing that retains static charges.
For more information, please visit
http://www.macsales.com/static
The OWC Envoy is compatible with both factory MacBook Air 2012 SSD modules and
OWC Aura Pro for MacBook Air 2012 SSD modules.
Using a Phillips P0 screwdriver, remove the 2 Phillips screws that are holding the top
and bottom of the OWC Envoy together. Note they are two lengths, the short screw
goes on the skinny end of the OWC Envoy, and the longer screw goes on the thicker
end.
Other manuals for Envoy
4
Other OWC Storage manuals
OWC
OWC Mercury Elite Pro Dual mini User manual
OWC
OWC Mercury Elite-AL User manual
OWC
OWC Mercury On-The-Go Pro Guide
OWC
OWC Mercury Elite-AL Pro "Quad Interface" User manual
OWC
OWC AURA User manual
OWC
OWC ThunderBay 8 Guide
OWC
OWC ThunderBay 4 mini Guide
OWC
OWC Mercury Elite Pro Dual User manual
OWC
OWC Envoy Guide
OWC
OWC FLEX 1U4 User manual
OWC
OWC THUNDERBAY Guide
OWC
OWC Mercury On-The-Go Pro User manual
OWC
OWC 6G-ER835-xxxx Guide
OWC
OWC Mercury Elite Pro Dual User manual
OWC
OWC Mercury Elite Pro Dual Guide
OWC
OWC Envoy User manual
OWC
OWC ThunderBay 4 mini Guide
OWC
OWC OWC Elite Pro User manual
OWC
OWC Envoy User manual
OWC
OWC RACK PRO MINI-SAS Guide
