oticon ConnectLine User manual
Order Number
: GETEC-C1-12-289
FCC Part 15 subpart C
Test Report Number
: GETEC-E3-12-100
Page 1 / 1
EUT Type: Bluetooth Analog Telephone adapter
FCC ID.: UXZBSH200
APPENDIX H
: USER’S MANUAL
INSTRUCTIONS for use INSTALLATION GUIDE
0000122272000001
Thank you
Thank you for choosing our product as your means to better hearing.
To support your efforts, we have put great care and attention into making sure that your
new Phone adapter has the highest quality and is easy to use and maintain.
The Oticon landline phone solution (Phone adapter) enables you to make hands free
phone conversation over most of the domestic area.
The complete system description is documented on-line at www.oticon.com/phone.
Here you will also find interactive presentations, “how to videos” and a support section
with frequently asked questions.
We recommend that you read this manual carefully to achieve the maximum benefit of
your new Phone adapter, before you start to use it. If you have any questions to the use
or maintenance of the Phone adapter, please contact your Hearing Care Professional.
Indication for use
The Phone adapter is intended to be used together with the Oticon Streamer and
Oticon wireless hearing instruments.
This enables the hearing instrument user to communicate wirelessly with a phone
conversation partner via a landline phone.
Contents
Package content 7
Phone adapter overview 8
Warnings 10
Installation 12
Connecting the Phone adapter to a power outlet 14
Connecting to phone line and landline phone 16
Pairing the Streamer to the Phone adapter 18
Technical information 22
IMPORTANT NOTICE
Please familiarise yourself with the entire contents of this booklet before using your
Phone adapter. It contains instructions and important information about the use and
handling of your Phone adapter.
7
Package content
Phone adaptor 2.0 – what is in the box
The Phone adaptor box consists of the following elements:
Phone adaptor Power supply Phone cable
PLACEHOLDER PLACEHOLDER
INSTRUCTIONS for use Streamer Pro INSTRUCTIONS for use Streamer Pro
This guide (Instructions for use)
PLACEHOLDER PLACEHOLDER
Når forsider er
godkendt og der ikke
sidder placeholder på
placerer jeg korrekte
pdf-filer
8 9
Phone adapter overview
Back
Power supply
Front
Phone indicator
Condition Power indicator Phone indicator
Power On, no connection to the Streamer
Pairing with the Streamer
The Streamer is wirelessly connected
Incoming call
Phone conversation
Fault condition
No light Blinking Steady
OUT
IN
AUX
POWER
To landline phone
To PSTN wall plug
ConnectLine in/out*
Power indicator
* For more information please refer to: www.oticon.com/phone
10 11
You should familiarize yourself fully with the following general warnings and the entire
contents of this booklet before using your Phone adapter.
Products to be connected to external equipment
• The safety of the use of the Phone adapter with auxiliary input cable is determined
by external signal source. When the input cable is connected to mains-operated
equipment, this equipment must comply with IEC-60065, IEC-60601, IEC-60950 or
equivalent safety standards.
• The Phone adapter is designed to comply with the most stringent Standards of
International Electromagnetic Compatibility. However, the Phone adapter might cause
interference with other medical devices. Please contact relevant personnel to obtain
permission before using the Phone adapter in hospitals or similar venues.
• The Phone adapter is not a toy and therefore should be kept out of the reach of
children and anyone else who might swallow parts or otherwise cause injury to
themselves. Special attention should be paid to the smaller components in order to
prevent children from swallowing them and choking.
If a part is swallowed, see a doctor immediately.
Warnings Warnings
12
Installation
Activating the Phone adapter for the rst time
Before you can use the landline phone solution together with your hearing instruments,
the Phone adapter must be connected to a power outlet and the public telephone line.
This is a step-by-step guide on how to install the Phone adapter.
All needed parts for the installation are included in the package.
14 15
Connecting the Phone adapter to a power outlet
Use the power supply with USB cable from box no. 1
1. Plug the USB connector into the “power” connector on Phone adapter
2. Plug the power supply into the mains wall socket or another power source
3. Check that power is turned on
4. After a few seconds the power indicator will light green
12
Box 1
4.
2.
1.
16 17
Connecting to phone line and landline phone
Place the Phone adapter unit in a suitable spot near your landline phone or base station.
1. Unplug the phone line from the landline phone (or base station).*
2. Plug the phone line from the wall adapter into the Phone adapter “IN” connector.
3. Plug the tele cord from box 2 in the Phone adapter “OUT” connector.
4. Plug the other end of the tele cord into the landline phone (or base station).*
Please lift off the handset from of your landline phone – you should now be able to hear
the dial tone from the handset speaker.
1 2 Box 2
3.
2.
1.
4.
* if your main phone or base station does not have a detachable plug for the landline connection, you should either try using
an alternative phone or a technician must be contacted to complete the installation.
Other manuals for ConnectLine
10
Table of contents
Other oticon Media Player manuals
