Osaki 3D Avalon User manual
SAVE THESE INSTRUCTIONS
OPERATION INSTRUCTIONS
MASSAGE CHAIR
3D Avalon
01
CONTENTS
Before Use
Important Safety Instruction
Instructions De Securite Importantes
Installation Parts
Place Massage Chair
Before Use
Product Structure
02-03
04-05
06-07
08-09
10-11
12-18
Usage Method
Operation Instructions
Massage close
19-50
50
Maintain
Cleaning and Maintenance 51
Important
Troubleshooting
Product Specifications
52
53
Thank You for purchasing this product. Please read this manual instruction carefully
in order to know how to use this product correctly before operation. Please pay
more attention to the important safety warnings and keep this manual book properly
for future use.
Note: We reserve the right to change the design and manual of the product. Details
are subject to change over time, and will not be informed otherwise. If there are
some differences between the products in the market circulation and the description
in the manual, it is a normal update of the product. Specific product functions and
colors are subject to change at any time.
0302
Important Safety Instruction Important Safety Instruction
When using an electrical appliance, basic precautions should
always be followed, including the following:
Read all instructions before using (this appliance)
DANGER-To reduce the risk of electric shock:
1) Always unplug this appliance from the electrical outlet immediately after
using and before cleaning.
WARNING-To reduce the risk of burns, fire,
electric shock, or injury to Persons:
1) An appliance should never be left unattended when plugged in. Unplug
from outlet when not in use, and before putting on or taking off parts.
2) Do not operate under blanket or pillow. Excessive heating can occur and
Cause fire, electric shock, or injury to persons.
3) Close supervision is necessary when this appliance is used by, on, or near
children, invalids, or disabled persons.
4) Use the appliance only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
5) Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into
water. Return the appliance to a service center for examination and repair.
6) Do not carry this appliance by supply cord or use cord as a handle.
7) Keep the cord away from heated surfaces.
8) Never operate the appliance with the air openings blocked. Keep the air
openings free of lint, hair, and the like.
9) Never drop or insert any object into any opening.
10) Do not use outdoors.
11) Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
12) To disconnect, turn all controls to the off position, then remove plug from
outlet.
13) The appliance is intended for household and indoor use only.
14) Connect this appliance to a properly grounded outlet only ,see grounding
instructions .
15)Keep children away from extended foot support (or other similar parts
16)Do not use massager in close proximity to loose clothing or jewelry.
17)Keep long hair away from massager while in use.
18)Connect this appliance to properly grounded outlet only. See Grounding Instructions.
GROUNDING INSTRUCTIONS
This product must be grounded, if it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock, this product is equipped with a cord having an equipment grounding
conductor and a grounding plug, the plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER: Improper connection of the equipment grounding
conductor can result in a risk of electric shock, check with a qualified electrician or
serviceman of you are in doubt as to whether the product is properly grounded, do
not modify the plug provided with the product-if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
1)This product is for use on nominal 120-volt circuit, and has a grounding plug that
looks like the plug illustrated in sketch on the page 50, A temporary adapter that
looks like the adapter illustrated in sketches B and C may be used to connect this
plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not
available the temporary adapter should be used only until a properly grounded
outlet (shetch A )can be installed by a qualified electrician, the green colored rigid
ear, lug, or the like extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover, Whenever the adapter is
used, it must be held in place by a metal screw.
SAVE THESE INSTRUCTIONS
Instructions De Securite Importantes Instructions De Securite Importantes
lors de l'utilisation d'un appareil électrique, des précautions de bases doivent être
respectées, y compris ce qui suit :
Lisez toutes les instructions avant d'utiliser l'appareil.
DANGER- Pour réduire le risque de choc électrique:
1) Toujours débrancher cet appareil de la prise électrique immédiatement après
usage et avant nettoyage
AVERTISSEMENT- Pour réduire le risque de brûlures, d'incendie, de choc
électrique ou de blessures:
1) Cet appareil ne doit jamais quittervotre surveillance lorsqu'il est branché.
Débranchez le de la prise lorsqu'il estinutilisé, et avant de placer ou d'enlever des
pièces.
2) Ne pas utiliser cet appareil sous une couverture ou un oreiller. Une chaleur
excessive peut provoquer un incendie, un choc électrique ou des blessures
corporelles.
3) Soyez prudent et maintenez une surveillance accrue lorsque cet appareil est
utilisé par, sur, ou près des enfants, de personnes invalides ou handicapées.
4) Utilisezl'appareil uniquement pour un usage habituel, comme décrit dans ce
manuel. Ne pas utiliser d'accessoires non recommandés par le fabricant.
5) Ne jamais faire fonctionner cet appareil si le cordon ou la fiche sont
endommagés, s'il ne fonctionne pas correctement, s'il est endommagé ou s'il est
tombé dans l'eau. Retournez l'appareil auservice technique pour examen et
réparation.
6) Ne transportez pas cet appareil par le cordon d'alimentation ou d'utilisation
comme une poignée.
7) Gardez le cordon loin des surfaces chauffées.
8) Ne jamais faire fonctionner l'appareil en obstruant les ouvertures d'air. Gardez les
ouvertures à l'air, libre de peluches, de cheveux, etc.
9) Ne jamais laisser tomber, ou insérer d'objet dans les ouvertures.
10) Ne pas utiliser à l'extérieur.
11) Ne pas utiliser dans les lieux où des aérosols (vaporisateurs) sont utilisés, ni là
où l'oxygène est administré.
12) Pour débrancher, mettre tous les boutons de l'appareil sur la position arrêt, puis
retirer la fiche de la prise.
13) L'appareil est destiné à un usage domestique et à l'intérieur seulement.
14) Connectez cet appareil à une prise correctement reliée à la terre. Voir les
instructions de mise à la terre.
15) Éloignez les enfants du support de pied ouvert (ou des autres pièces
semblables).
16) Ne pas utiliser de massage à proximité des vêtements amples ou des bijoux.
17) Garder les cheveux longs à l'écart de masseur en cours d'utilisation.
18) Raccordez cet appareil à une prise correctement mise à la terre.
Ce produit doit être relié à la terre. Si il dysfonctionne ou tombe en panne, la
terrefournit un chemin de moindre résistance pour le courant électrique afin de
réduire le risque de choc électrique. Cet appareil est équipé d'un cordon avec un
conducteur de mise à la terre des équipements et une prise de terre. La fiche doit
être branchée dans une prise appropriée qui est correctement installée et mise à la
terre conformément à la règlementation locale.
DANGER: un mauvais branchement de l'équipement à la prise de terre, peut
entraîner un risque de choc électrique. Consultez un électricien qualifié si vous avez
des doutes quant à savoir si le produit est correctement mis à la terre. Ne pas
modifier la fiche fournie avec le produit si elle ne rentre pas dans la prise. Adressez
vous à un électricien qualifié le cas échéant.
1)Ce produit est destiné à être utilisé sur un circuit de 120 volts, et possède une
fiche de mise à la terre semblable à la fiche illustrée sur le croquis de la page 50. Un
adaptateur temporaire qui ressemble à l'adaptateur illustré sur le croquis B et C peut
être utilisé pour brancher cette fiche à un réceptacle 2-pole, comme indiqué sur le
croquis B. Si une prise de terre n'est pas disponible, l'adaptateur temporaire ne doit
être utilisé que jusqu'à une prise de terre correcte (croquis A) pour être installé par
un électricien qualifié. L'oreille rigide de couleur verte, qui dépasse de l'adaptateur,
doit être connectée à une terre permanente comme un couvercle de boîte de sortie
mise à la terre. Chaque fois que l'adaptateur est utilisé, il doit être maintenu en
place par une vis en métal.
S'il vous plaît noter que lorsque ne pas coincer votre détection des doigts
Avant le nettoyage ou la réparation doivent couper l'alimentation
CONSERVER CES INSTRUCTIONS
INSTRUCTIONS DE BASES
0504
0607
Installation Parts
Armrest Installation Instructions
1. After power on, use the remote controller to lie down the backrest .
2. Insert the wire harness and air pipes on the side of the steel frame into the
corresponding positions on the armrest (Figure 1).
3. Lift up the armrest with the air pipes and wires inserted, and hang all the hooks
on both sides of the steel frame (Figure 2).
1 2
3 4
4. Press the roller at the rear end of the armrest into the corresponding slot (Figure
3), and lower the armrest downwards.
Then push the armrest backwards, and lock it with 2 M6*16 screws (Figure 4).
Installation Parts
Calf Installation Instructions
1. Insert the wires and air pipes of the footrest into the front sockets of the steel
frame assembly respectively (Figure 1).
2. After the wire connection is completed, open the fixing covers of the footrest on
both sides of the steel frame assembly (Figure 2).
3. Lift the footrest, put them into the slot, then flip the fixing cover down, fixing them
with two M5*12 screws (Picture 3).
1 2
3
Touchscreen Remote Controller Bracket Installation Instructions
1. Align the bracket with the front hole of the armrest (right) and fasten it with M5*16
screws (Figure 1).
2. Align the bracket decoration with the bracket and press down along the bracket
rod to the end. (figure 2).
3. After the entire bracket is installed, shake the bracket lightly to confirm whether it
is firmly installed; the bracket installation is complete (Figure 3).
1 2
3
0809
Make sure there is enough
space for the massage chair to
be tilted at least 4 inches.
Do not expose the massage chair
directly to high temperature
environment due to sunlight(such
as: in front of heating equipment),
and place it to where can avoid
high temperature and direct
sunlight. It is recommended to lay
a soft cushion for long-term use in
a designated location. When laying
the cushion, the size of the
cushion should be enough to cover
Keep the range where the machine
touches the floor and the range
where your feet touch the floor.
Require team work to lift and move
the chair to avoid injury.
1. Please lift the massage chair to
move it on vulnerable ground such as
wooden floor.
2. When moving on a similar wooden
floor, it is recommended to lift it.
Avoid damage to the casters. When
the floor is lifted and moved to the
designated position, be careful to
keep your hands out of the way to
avoid injury, and be careful of your
feet being crushed. Do not let go of
the unit until the unit is completely
flat, the floor may be damaged,
therefore, it is recommended to place
mats, etc. on the floor.
Caution
Product lift instruction
Installation placement
Caution
Place Massage Chair
45°
12
Zipper
How to disassemble and use headrest cushion and backrest cushion
Move method
Caution
Use the rear casters to move the
massage chair.Move the chair by
tilting it down and backward about
45° as shown in the diagram.
NOTE: Excessive force to title will
cause the chair to tip over
completely and product damage.
1.Before moving, please shut down the
machine properly to reset the whole
machine, and then cut off the power.
2.Please keep the chair vacant when
moving. (People, pets or clutter will not
be able to stay on the chair.)
3.When moving, do not cross a drop
barrier higher than 2mm or a gap
greater than 5mm.
4.When using casters to move this
product, single continuous movement
is not supported; if the distance
exceeds 50 meters, please make this
product move slowly and evenly.e the
product slowly and uniformly.
Zipper
Using a headrest cushion can reduce the intensity
of kneading massage on the neck and shoulders,
and you can decide whether to use a headrest
cushion according to your needs (recommended to
use a headrest cushion). The backrest cushion
and the backrest are connected by a zipper (1),
and the headrest cushion and the backrest
cushion are connected by a zipper (2).
Caution
Place Massage Chair
4 inches
10 11
Check around
Make sure there are no foreign objects in the
gaps of the machine
Make sure that there are no people, pets and
other objects around the unit. Caution
Caution
Before massaging, make sure that no
foreign objects are caught in the legs,
feet, etc.
Under no circumstances allow hands,
feet, and head to penetrate into the area
between the lower leg mechanism and
main body, or the area between the
armrest and the capsule.
Under no circumstances should hands,
feet, or head sink under the fabric or
leather covering of the massage area.
Before Use
POWER I NPUT
ON/OFF
FUSE:
T6.3AL 250V
POWER IN PUT
ON/OFF
FUSE:
T6.3AL 250V
Turn on the power
Caution
Plug in power cord Schematic diagram
of power on Turn on the power
switch ("I" position)
Before Use
Warn
■Please check the power cord and plug for damage before use.
■Please supply power to this product in accordance with the working
power requirements of this product's calibration.
■It is strictly forbidden to use a power supply other than the nominal
power supply of this product.
■It is strictly forbidden to connect various power conversion devices
without authorization to supply power to this product.
1213
Description of Components
Product Structure
1
2
3
4
5
6
7
8
9
10
11
12
1.Head cushion
2.Remote controller
3.Arm air pressure
4.Leg massage unit
5.Ambient lighting
6.Space capsule
7.Shoulder air pressure
8.Shawl backrest cushion
9.Armrest Shortcut Keys
10.Health sensor
11.Armrest
12.Side panel
Product Structure
Schematic view of functional distribution
1
2
3
4
5
6
7
8
9
1.Shoulder
Airbag massage·
2.Arm
Remote controller rest·
Mobile phone placement rest·
USB charging socket·
Wireless charger·
Built-in voice control microphone·
3.Hand
Airbag massage·
4.Leg
Airbag massage·
5.Sole
Roller massage·
6.Both sides of the head
Audio music playback·
7.Head & neck to seat part
Manipulator massage·
8.Waist and shoulder
Heating function·
9.Leg
Airbag massage·
Kneading massage·
1415
How to use the shawl
Product Structure
Heating area
Heating area
Schematic diagram
of use on back and waist Schematic diagram of use
on shoulder and abdomen
·It is provided with a unique shawl assembly, with innovative heating functions on
the shoulder, back, waist and abdomen and heating with graphene. Users can
place the shawl at different massage positions according to massage
requirements. When the shawl assembly is placed at the shoulder position, it will
heat the acupoints such as Bingfeng, Tianzong, Yunmen and Qihu around the
shoulder and clavicle by graphene heating, effectively relieving symptoms such
as scapulohumeral periarthritis and cough, and removing cold and moisture from
shoulder joints.
·When the shawl assembly is placed on the abdomen and back (dual-purpose),
through graphene heating, it plays the role of dispelling cold and relieving pain,
warming channels and removing blood stasis in the back and abdomen,
distributing Qi and blood of the back and abdomen meridian, alleviating the
symptoms such as irregular menstruation and dysmenorrhea for women, relieving
low back pain and kidney discomfort, warming intestines and stomach and
clearing intestinal cold, with a good effect on some people with deficiency of qi and
deficiency of spleen and stomach.
Product Structure
Power Pause
Angle
Auto
Manual
Home
Settings
4D +
4D -
Speed -
Speed +
Air intensity +
00:30
Full
4D I
Back heat Roll Calf Voice
Manual
Area
Shoulder
Strong
Gentle
Soothing
12
11 10
09
08
07
060504030201
13
14
15
16
1920
18
212223
17
24
25
26
Main information interface
1617
I.Remote controller keys instruction
01.On/off touch key: Enable or disable the massage chair function.
02.Pause key: Pause the massage or exit from pause massage.
03.Back heating key: Enable or disable the back heating function.
04.Sole roller key: Enable or disable the sole roller function.
05.Calf kneading key: Enable or disable the calf kneading function.
06.Voice control key: Enable or disable the voice control function.
07.Intensity selection key: Select one from different automatic massage intensities.
08.Button on/ff key: Turn on or off the massage chair.
09.Air intensity key: The function of regulating air intensity massage.
10.Massage area key: The function of selecting massage position.
11.Shoulder position adjustment key: Regulate shoulder position and confirm massage
criterion.
12.Current status key: Enter to view current massage chair status.
13.Automatic function menu key: Enter to select automatic massage program.
14.Remote function menu key: Enter to remotely set the massage function.
15.Seat adjustment menu key: Enter the sitting posture adjustment interface to select
sitting posture angle.
16.Setting menu key: Enter the setting menu interface.
Width +
Air intensity -
Width -
Power Pause
Customise
Memory
Health
00:30
Full
4D I
Back heat Roll Calf Voice
Manual
Area
Shoulder
Strong
Gentle
Soothing
4D +
Speed +
Speed -
4D -
Width +
Air intensity +
Air intensity -
Width -
Product StructureProduct Structure
17.Massage technique selection key: Select the massage technique.
18.Massage width key: Adjust the massage width.
19.Status display bar key: Display the massage program status information.
20.Air massage selection key: Select air position.
21.Time adjustment menu key: Adjust the massage time.
22.Massage speed key: Adjust the massage speed.
23.4D intensity key: Adjust 4D intensity.
24.Health detection menu key: Enter the health detection interface.
25.Custom menu key: Enter the custom interface.
26.Storage menu key: Enter the storage interface.
Table of contents
Other Osaki Massager manuals
Osaki
Osaki OS Pro Marquis User manual
Osaki
Osaki OS-Pro Soho User manual
Osaki
Osaki Hamilton LE OS-3D User manual
Osaki
Osaki OS-4000XT User manual
Osaki
Osaki Touch Heart OS-7075R User manual
Osaki
Osaki OS-Aster User manual
Osaki
Osaki OS4000 User manual
Osaki
Osaki JP650 3D User manual
Osaki
Osaki OS 3D PRO DREAMER User manual
Osaki
Osaki OS-1000 User manual
Osaki
Osaki Maxim 3D LE User manual
Osaki
Osaki OS-Pro 4D Encore User manual
Osaki
Osaki NECK TENS User manual
Osaki
Osaki Otamic LE OS-3D User manual
Osaki
Osaki Pro Maestro User manual
Osaki
Osaki EC-806R User manual
Osaki
Osaki 4000XT User manual
Osaki
Osaki TP-8500 User manual
Osaki
Osaki Vista User manual
Osaki
Osaki OS:PRO-EKON User manual
