Oricom CARE620-1 User manual
CARE620/CARE820
Amplified Big Button Cordless Phone
USER GUIDE
Keep this user guide for future reference. Always retain yourproof of
purchase in case of warranty service.
Important Safety Instructions
...................................................................
2IMPORTANT NOTICE ............................ 5
Package contents:.................................. 7
INSTALLING YOUR PHONE ................... 8
Connecting the base station.................. 8
Installing and charging the batteries..... 8
USING YOUR PHONE
.......... Error! Bookmark not
defined.
SMART CALL BLOCK FUNCTIONS
.............. Error!
Bookmark not defined.
PRIVATE PHONEBOOK
....... Error! Bookmark not
defined.
CALLER
DISPLAY
(NETWORK
DEPENDENT)
... Error!
Bookmark not defined.
PHONE SETTINGS
Error! Bookmark not defined.
ANSWERING MACHINE (FOR CARE820 ONLY)
Error!
Bookmark not defined.
TROUBLESHOOTING
..... Error! Bookmark not
defined.
Express Warranty (Australia)
.. Error! Bookmark
not defined.
Express Warranty (Australia)............... 64
Need Help?
If you need assistance setting up or
using your Oricom product nowor in the
future, call Oricom Support.
Australia 02 4574 8888,
www.oricom.com.au, Mon-Fri 8am –6pm
AEST
New Zealand 0800 67 42 66, Mon-Fri
10am –8pm NZST
Important Safety
Instructions
When using your telephone equipment, basic safety
precautions should
always be followed to reduce the risk
of fire, electric shock and injury, including the following:
1. Read and understand all the instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do
not useliquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
4. Do not use this product near water (for example, near a
bath tub,kitchen sink, swimming pool).
5. Do not expose the telephone to direct sunlight or extreme cold
environment.
6. Do not put the telephone close to heating sources such as
radiators,cookers, etc.
7. Do not overload wall outlets and extension cords as this can
result in
the risk of fire or electric shock.
8. Unplug this product from the wall outlet and refer
servicing to
qualified service provider under the
following conditions:
•When the power supply cord or plug is damaged or frayed.
•If the product does not operate normally by following the
operatinginstructions.
•If the product has been dropped and the cabinet has been
damaged.
•If the product exhibits a distinct change in performance.
9. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
10.Do not use the telephone to report a gas leak in the vicinity of
the leak.
11.Use only the supplied NiMH (Nickel Metal Hydride) batteries.
The operation periods for the handsets are only applicable
with thedefault battery capacities
12.The use of other battery types or non-rechargeable
batteries/primarycells can be dangerous. These may cause
interference and/or unit damage. The manufacturer will not be
held liable for damage arisingfrom such non-compliance
13.Do not use third party charging bays. The batteries
may bedamaged.
14.Please note the correct polarity while inserting the batteries.
15.
Do not immerse batteries in water, do not place in
fire.
IMPORTANT NOTICE
Under power failure conditions, this telephone may not operate.
Please ensure that a separate telephone, not dependent on local
power, is available for emergency use.
Notes for operation in New Zealand
The grant of a Telepermit for any item of terminal equipment
indicates only that Spark has accepted that the item complies with
the minimum conditions for connection to its network. It indicates no
endorsement of the product by Spark, nor does it provide any sort
of warranty. Above all, it provides no assurance that any item will
work correctly in all respects with another item of Telepermitted
equipment of a different make or model, nor does it imply that any
product is compatible with all of Spark’snetwork services.
This equipment may not provide for the effective hand-over of a call
to another device connected to the same line.
This equipment should not be used under any circumstances that
may constitute a nuisance to other Spark Customers.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance
only if you wish to connect more than 1 telephone to your
telephone line.A standard telephone line has a maximum REN
capacity of 3 (RN of 5). It is possible to connect 3 devices with a
REN of 1 (RN of 1) with no degradation to the product’s
performance. Exceeding this limit maycause the volume of the
ringer in any phone to decrease or not ring at all.
Important: This equipment may not provide for the effective hand-
over
of a call to another device connected to the same line. The recall
facility
of this product may not always operate correctly on some
parts of theSpark network or on some PABXs available on the
market. If this is the case then 'recall' can be activated by
'flashing' the switch-hook or repeat
use of the recall button.
RECALL PROBLEMS WITH THIS PRODUCT ARE NOT TO BE
REPORTED TO THE SPARK FAULTS SERVICE.
All persons using this device for recording telephone conversations
shall comply with New Zealand law. This requires that at least
one party to the conversation is to be aware that it is being
recorded. In addition, the Principles enumerated in the Privacy Act
1993 shall be complied with in respect to the nature of the personal
information collected, the purpose for its collection, how it is used
and what is disclosed to any other party.
Package contents:
The package contains the following:
Oricom CARE620-1/CARE820-1 Pack Contents
- 1 x Cordless Handset
- 1 x Base
- 1 x Line Cord
- 1 x AC Power Adaptor
- 2 x AAA NiMH Batteries
- 1 x User Guide
Oricom CARE620HS Pack Contents
- 1 x Additional Handset
- 1 x Charging Base Station
INSTALLING YOUR PHONE
Connecting the base station
1) Plug the power supply & line cord into the base station.
2) Plug the power supply & line cord into the mains socket.
3) Always use the cables provided in the box.
Oricom CARE620-1 Oricom CARE820-1
Installing and charging the batteries
1) Slide off the battery compartment cover to remove it.
2) Place the 2 batteries as indicated. Respect polarity.
3) Slide the battery compartment cover back.
4)
Place handset on base and charge batteries for 16 hours
for the first
charge. A beep indicates that the handset is
properly placed on the
base or charger.
Please note:
1. Use only the power adaptor provided for the base station.
2. Use only NiMH rechargeable batteries.
3. If the handset will not be used for a long time, disconnect and
remove the batteries to prevent possible leakage.
GETTING TO KNOW YOUR PHONE
Overview of the Handset
MENU/OK
•Menu button is located half way down the handset on the
left hand side
•In standby mode: Press to access the main menu
•In sub-menu mode: Press to confirm the selection
•During a call: Press to
access Intercom/
Phonebook/ Redial List/ Call
List
SMART CALL BLOCK/CLEAR/BACK
•Call block/clear/back button is located half way down
handset on right hand side, directly opposite the menu
button.
•In main menu mode: Press to select the Call Block
Setting menu
•In ringing mode: Press to block incoming call if
BLOCK SET. is set to ON.
•In sub-menu mode: Press to
go backto previous menu.
•In editing / predialing mode: Press to clear a character
/ digit. Press and hold to delete all characters / digits.
UP
•Up button is located just above the call block button on
right hand side of handset
This manual suits for next models
1
Table of contents
Other Oricom Handset manuals
