Oregon Scientific RRM320P User manual

E N

Radio Controlled Projection Clock

with FM Radio and Outdoor

Temperature

Model: RRM320P

USER MANUAL

CONTENTS

Overview ...................................................................2

Front View .............................................................. 2

Back View ..............................................................2

Top View ................................................................3

Remote Sensor ......................................................3

Getting Started .........................................................3

Remote Sensor Installation .................................... 3

Main Unit Installation ............................................. 5

Clock .........................................................................5

Clock Reception ..................................................... 5

Manually set Clock ................................................. 5

Alarm ........................................................................6

Radio .........................................................................6

Projection .................................................................6

Reset .........................................................................7

Speciﬁcations .......................................................... 7

Main Unit ................................................................ 7

Remote RF Clock Thermo Sensor ......................... 7

Precautions ..............................................................7

About Oregon Scientiﬁc .........................................8

EU-Declaration of Conformity ................................ 8

FCC Statement .........................................................8

Declaration of Conformity ...................................... 9

E N

OVERVIEW

FRONT VIEW (FIG.1)

12345678

1. PM: Indicates PM (12 hour mode)

2. Time zone offset

3. Clock signal reception indicator

4. Indicates radio volume

5. Clock / Volume

6. Radio station (logged)

7. Sleep mode is ON

8. Indicates Radio mode is ON and frequency is

displayed

9. Calendar / Radio frequency

10. Sensor batteries low

11. Sensor reception indicator

12. User selectable temperature units

13. Temperature

14. Beep / Radio Alarm 1/ 2

15. Main unit batteries low / no battery

BACK VIEW (FIG.2)

１

78 9 10 11

1. FOCUS Wheel: Adjust projection focus

2. 180° FLIP: Flip projected image 180o

3. PROJECTION ON/OFF: Turn projection On / Off

4. + / - : Increase / decrease values of the selected

setting

5. SET / SET , SET : Change settings /

display / View respective alarm status; set alarm

6. DIMMER: Select display brightness LO / HI

7. SEARCH SENSOR: Initiate sensor search

8. oC / oF: User selectable temperature units

9. RESET: Reset unit to default settings

10. AC / DC socket

11. Battery compartment

E N

TOP VIEW (FIG.3)

1. ALARM 1 ON / OFF: Activate / deactivate

Alarm 1 function

2. VOL / : Adjust radio volume

3. ALARM 2 ON / OFF: Activate / deactivate

Alarm 2 function

4. STATION: Set radio station

5. TUNE / : Auto search / adjust radio

frequency

6. RADIO ON / OFF: Turn Radio On / Off

7. SNOOZE / SLEEP: Alarm snooze or enable radio

sleep

REMOTE SENSOR

FRONT VIEW BACK VIEW

1. RESET: Reset unit to default settings

2. SEARCH (RTHN318 / A / D only)

3. EU / UK Switch (RTHN318D only)

4. Channel Switch

5. Double sided adhesive tape

6. Wall mount hole

7. Battery compartment

GETTING STARTED

REMOTE SENSOR INSTALLATION

1. Slide open the battery door.

2. Slide channel switch to channel 1.

3. Select EU/UK. (RTHN318D only)

E N

4. Insert the battery, matching the polarities (+ / -).

5. Press RESET after each battery change.

6. Press SEARCH on the sensor to start clock signal

search.

7. Close the battery door.

NOTE Install battery in the remote sensor before

connecting power to the main unit.

8. Press and hold SEARCH SENSOR on main unit

to initiate search and start receiving time and

temperature data from the sensor.

The sensor reception icon shows the status:

ICONS MEANING

Main unit is searching for

sensor(s)

A sensor channel has been

found and logged on

No sensor found

9. Secure the sensor in the desired location using the

wall mount hole or double sided adhesive tape.

For best results:

• Place the sensor within 30 m (100 ft) of the main

unit.

• Place the sensor out of direct sunlight and

moisture.

• Position the sensor so that it faces the main unit,

minimizing obstructions such as doors, walls and

furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic / electronic objects.

• Position the sensor close to the main unit during

cold winter months as below-freezing temperatures

may affect battery performance and signal

transmission.

TIP The transmission range may vary depending

E N

on many factors. You may need to experiment with

various locations to get the best results.

NOTE Use alkaline batteries for longer usage and

consumer grade lithium batteries in temperatures

below freezing.

MAIN UNIT INSTALLATION

• Plug AC/DC adaptor into socket. Make sure the

adapter is not obstructed and is easily accessible

to the unit.

To completely disconnect from power, the adapter

should be disconnected from the main unit.

NOTE The main unit and adapter should not be

exposed to wet conditions. No objects ﬁlled with liquid,

such as vases, should be placed on the main unit and

adapter.

Memory backup:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the polarities

(FIG. 2).

Batteries serve as a back-up power supply. To fully

utilize all features, install adapter.

NOTE Batteries should not be exposed to excessive

heat such as sunshine or ﬁre.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock

automatically with a clock signal received from

provided remote sensor.

To enable / disable signal reception:

Press and hold + to enable or - to disable signal

reception.

NOTE Reception takes 2-10 minutes. If the signal is

weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG SIGNAL NO SIGNAL

NOTE Clock reception is dependent on the successful

transmission of data from remote sensor. If is

displayed, check ﬁrst for sensor reception.

MANUALLY SET CLOCK

1. Press and hold SET .

2. Press + or - to change the settings.

E N

The settings order is: time-zone offset, 12/24 hr format,

hour, minute, year, month-day / day-month, day and

month.

Time zone offset sets the clock +/- 23 hours from the

received clock signal time.

ALARM

To set the alarm:

1. Press SET or SET to display desired set

alarm time.

2. Press and hold SET or SET to enter

respective setting.

3. Press + / - to set hour / minute.

4. Press + / - to select beep alarm or radio alarm .

5. If radio alarm is selected, press + / - to select the

radio station and + / - to adjust the volume.

To activate / deactivate alarm:

• Press ALARM 1 ON / OFF or ALARM 2

ON / OFF.

To silence the alarm:

• Press SNOOZE / SLEEP to silence it for 8 minutes

• Press SET / SET , / , to turn the

alarm off and activate it again after 24 hours.

RADIO

To activate / deactivate radio:

• Press RADIO ON / OFF to turn radio ON / OFF.

To set radio station:

1. Press RADIO ON / OFF or SNOOZE / SLEEP to

enter Radio Mode.

2. Press STATION to scroll through preset station

numbers (1-8).

3. Press and hold TUNE + / TUNE – to auto search

or press TUNE + / TUNE - to manually select

frequency.

4. Once desired frequency has been found, press and

hold STATION to save.

To adjust volume:

• Press VOL + / VOL – when in Radio Mode.

To adjust sleep timer setting:

1. Press SNOOZE / SLEEP to activate.

2. Press SNOOZE / SLEEP again to change the sleep

time setting (120, 90, 60, 30, 15, 0 min).

PROJECTION

This unit projects time and outdoor temperature

information for your convenience.

For continuous projection:

• Slide PROJECTION switch to ON when adaptor is

connected, to enable / disable.

E N

To ﬂip projected image by 180°:

• Press 180o Flip.

To focus image:

• Turn FOCUS wheel.

NOTE If projection is illuminated, do not look directly

into the projector.

RESET

Press RESET to return to the default settings.

SPECIFICATIONS

MAIN UNIT

TYPE DESCRIPTION

L x W x H 183 x 67 x 81mm

(72 x 26.4 x 31.9in)

Weight 386 g (13.6 oz) without battery

FM 87.5 to 108 MHz

Power 6V AC adaptor

2 x UM-4 (AAA) 1.5V batteries

(for backup)

REMOTE RF CLOCK THERMO SENSOR

TYPE DESCRIPTION

L x W x H 117 x 80 x 171 mm

(4.78 x 3.27 x 6.98 in)

Weight 241 g (8.5 oz) without battery

Temperature range -20°C to 60°C (-4°F to 140°F)

Resolution 0.1°C (0.2°F)

Signal frequency 433 MHz

Transmission range 30 m (98 ft) unobstructed

No. of channels 5

Power 1 x UM-3 (AA) 1.5 V batteries

PRECAUTIONS

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity

• Do not cover the ventilation holes with any items

such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components.

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old

batteries.

E N

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland

and Norway

• Images shown in this manual may differ from the

actual display.

• When disposing of this product, ensure it is

collected separately for special treatment.

• Placement of this product on certain types of

wood may result in damage to its ﬁnish for which

Oregon Scientiﬁc will not be responsible. Consult

the furniture manufacturer’s care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before ﬁrst use.

NOTE The technical speciﬁcations for this product

and the contents of the user manual are subject to

change without notice.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientiﬁc.com) to learn

more about Oregon Scientiﬁc products. If you’re in

the US and would like to contact our Customer Care

department directly, please visit:

www2.oregonscientiﬁc.com/service/support

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientiﬁc.com/about/international

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientiﬁc, declares that this Radio

Controlled Projection Clock with FM Radio and Outdoor

Temperature (model: RRM320P) is in compliance

with the essential requirements and other relevant

provisions of Directive 1999/5/EC. A copy of the signed

and dated Declaration of Conformity is available on

request via our Oregon Scientiﬁc Customer Service.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found

to comply with the limits for a Class B digital device,

E N

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please call our customer service

number (listed on our website at www.oregonscientiﬁc.

com), or on the warranty card for this product) for all

inquiries instead.

Name: Oregon Scientiﬁc, Inc.

Address: 19861 SW 95th Ave.,Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: RRM320P

Product Name: Radio Controlled Projection Clock

with FM Radio and Outdoor

Temperature

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received,

including interference that may cause undesired

operation.

Other manuals for RRM320P

Table of contents

Other Oregon Scientific Clock manuals

Oregon Scientific

Oregon Scientific RAR391P User manual

Oregon Scientific

Oregon Scientific RMR939P User manual

Oregon Scientific

Oregon Scientific RM901 User manual

Oregon Scientific

Oregon Scientific RM329P User manual

Oregon Scientific

Oregon Scientific 983U User manual

Oregon Scientific

Oregon Scientific JM200 User manual

Oregon Scientific

Oregon Scientific CIR100 User manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P User manual

Oregon Scientific

Oregon Scientific PROJI RM338PX User manual

Oregon Scientific

Oregon Scientific RM822 User manual

Oregon Scientific

Oregon Scientific RM330P User manual

Oregon Scientific

Oregon Scientific RM888PA User manual

Oregon Scientific

Oregon Scientific RRA323P User manual

Oregon Scientific

Oregon Scientific BAR332ES User manual

Oregon Scientific

Oregon Scientific PRYSMA G RRM222P Installation instructions

Oregon Scientific

Oregon Scientific RM328P User manual

Oregon Scientific

Oregon Scientific RRM326P User manual

Oregon Scientific

Oregon Scientific PRYSMA B User manual

Oregon Scientific

Oregon Scientific JW108 User manual

Oregon Scientific

Oregon Scientific Glaze JW208 User manual

Oregon Scientific

Oregon Scientific JMR868 User manual

Oregon Scientific

Oregon Scientific PRYSMA R User manual

Oregon Scientific

Oregon Scientific CP100 User manual

Oregon Scientific

Oregon Scientific RM383PA - MANUAL 2 User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

La Crosse Technology

La Crosse Technology WS-8256-AL user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

La Crosse Technology

La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology

La Crosse Technology W86531 owner's manual

Sharp

Sharp SPC900 instruction manual

La Crosse Technology

La Crosse Technology 404-50447 quick start guide

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual