Oregon Scientific RM962A User manual

RADIO CONTROLLED CLOCK

WITHINDOORTHERMOMETER

MODEL:RM962A

Instruction Manual

INTRODUCTION

Congratulations on your purchase of the Clock with Temperature

Display RM962A.

The RM962A is a multifunction radio controlled clock. It can

automatically synchronize its current time and date when brought

within an approximate 1500 km or 1000 miles radius of the radio

signal generated from the U.S. Atomic Clock.

Features of this unit include: indoor temperature display, current

date display, daily crescendo alarm with eight-minute snooze

function and EL backlight.

DESCRIPTION OF PARTS

A 3-lineLCD

Displays the time, date, alarm status and temperature

B [ ] Battery-Low icon

Lights up when batteries are running dry

C[ ] Radio-Reception Signal

Indicates the condition of radio reception

D[ ] Alarm-on icon

Appears when the alarm is activated

E[ ] Alarm icon

Appears when the alarm time is displayed

F MODE button

Toggles the calendar clock display modes or activates the

calendar clock setting mode

G UP[ ]button

Increases the value of a setting

H ZONE button

Toggles among the 4 U.S. time-zones: Pacific, Mountain,

Central or Eastern

I ALARM button

Displays the alarm time or sets the alarm status

J[ ]button

Activates the snooze function when an alarm activates or

turn on the back light for five seconds

K Batterycompartment

Accommodates two UM-4 or “AAA” size 1.5V batteries

L RESET button

Resets the unit by returning all settings to their default

values

M Rotatable stand

BATTERY INSTALLATION

The unit uses two (2) UM-4 or “AAA” size 1.5V batteries.

To insert batteries:

1. Click open the battery door as shown.

2. Insert the batteries strictly according to the polarities shown

therein.

3. Replace the battery compartment door.

Note: The battery life can be reduced vastly by frequent use

of the back light or snooze function.

If not disposed of properly batteries can be harmful.

Protect the environment by taking exhausted batteries

to authorized disposal stations.

If the batteries are already inserted, pull out the plastic tab.

HOW TO USE THE BACKLIGHT

Press [ ] once. The back light will activate

for five seconds.

ABOUT RADIO RECEPTION

This unit is a radio frequency (RF) controlled clock. When located

within a 1500km or 1000 miles radius of radio signal from the U.S.

Atomic Clock. The benefit of a RF controlled clock is that highly-

accurate time is maintained and manual adjustments to the time

and date are not required.

When the batteries are first installed, the unit will automatically

search for a radio signal.

When in search mode, the antenna icon [ ] will blink. This

process takes between two (2) and ten (10) minutes. After initial

search,shortperiodicreception-signal scanswillcommenceseveral

times a day.

When the RM962A is new and initially set up, reception of the U.S.

Atomic clock signal can take up to 72 hours.

The antenna icon indicates the quality of reception.

When the reception is complete, the radio-reception signal will

stop blinking.

Interference

Receptioncanbeaffectedbyanumberoffactors.Forbestreception,

place the device away from metal objects and electrical appliances.

Note: Interference from sources such as TV sets can affect

the signal. If, after batteries have been inserted for ten

minutes, the signal is not received, then set the time manually

(see section: How To Set The Calendar Clock Manually).

To deactivate the auto-reception of RF signal, press and hold the

ZONE button for 2 seconds. The antenna icon will disappear to

show this deactivation.

To activate the auto-reception again, press and hold the [ ]

button for 2 seconds again and the antenna icon will re-appear.

“SECONDS” AND DAY-OF-THE-WEEK

DISPLAY

The “seconds” and the day-of-the-week share the same section of

the display.

day-of-the-week display “second” display

The day-of-the-week is displayed as an abbreviation in three

languages.

Tochangethe“seconds”displaytotheday-of-the-weekdisplay:

• When the “seconds” are displayed, press MODE once.

Tochangetheday-of-the-weekdisplaytothe“seconds”display:

• When the day-of-the-week is displayed, press MODE once.

STRONG

WEAK

NO RECEPTION

RECEIVING

CALENDAR AND ALARM TIME DISPLAY

The calendar and the alarm-time share the same section of the

display.

The calendar is displayed in a month-day format.

calendar mode alarm mode

To change the calendar display to the alarm-time display:

• When the calendar is displayed, press ALARM once.

To change the alarm-time display to the calendar display:

• When the alarm time is displayed, press MODE once.

HOW TO SET THE CALENDAR

CLOCK MANUALLY

If the unit is taken outside of the range of radio signal it will need

to be manually set.

To manually set the clock:

1. When the calendar is displayed, press and hold MODE for two

seconds. The hour value will start to blink.

2. Enter the hour using the [ ] button. Hold down the button to

rapidly increase the value.

3. Press MODE to confirm and proceed to set the minute, year,

month, day and display language.

4. For the display language, you can choose between (E) for

English, (F) for French and (S) for Spanish.

Day-of-the-week

Language Monday Tuesday Wed. Thursday Friday Saturday Sunday

English

French

Spanish

5. When finished, press MODE to return to normal display. If

changes are made on the minutes, the seconds will reset and

start from zero.

HOW TO SET AND ACTIVATE

THE ALARM

Toset thealarm time:

1. Press and hold ALARMfor two seconds when the alarm time is

displayed.

2. Enter the value for the hour digits using the [ ] button. Hold

down the button to rapidly increase the value. Press ALARMto

confirm and go to the minute digits. Enter the value and press

ALARMtoconfirm.

3. The alarm is automatically activated. To deactivate it, press

ALARMonce.

ALARM AND SNOOZE FUNCTION

When the alarm is set, it will activate at the set time. The back light

will go on for five seconds and the alarm-on icon [ ] will flash.

The crescendo function allows the alarm to start gently and step up

its intensity in three steps. Without interruption, the alarm will

activate for 2 minutes.

To stop the alarm, press ALARM button. If the

[ ] button is pressed, the snooze function

will be triggered. The alarm will stop for eight minutes before

activating again.

INDOOR TEMPERATURE

The temperature is shown in Fahrenheit (°F). The unit is capable of

measuring temperatures within the 23°F and 122°F range. If the

temperaturegoesaboveorbelowthat,thedisplaywillshow“HHH”

or“LLL”.

HOW TO RESET THE UNIT

The RESET button allows you to return all settings to its factory

values.

The button is required only when the unit is not operating in a

favorable way, such as in the rare case of a malfunction.

PRECAUTIONS

This unit is engineered to give you years of satisfactory service if

you handle it carefully. Here are a few precautions.

1. Do not immerse the unit in water. If you spill liquid over it, dry

it immediately with a soft, lint-free cloth.

2. Do not clean the unit with any alcohol containing detergent,

abrasive or corrosive materials. They may scratch the plastic

parts and corrode the electronic circuit.

3. Do not subject the unit to excessive force, shock, dust,

temperature or humidity, which may result in malfunction,

shorter electronic life span, damaged battery and distorted

parts.

4. Do not tamper with the unit’s internal components. Doing so

will invalidate the warranty on the unit and may cause

unnecessary damage. The unit contains no user-serviceable

parts.

5. Only use fresh batteries as specified in the user’s instructions.

Do not mix new and old batteries as the old ones may leak.

6. Always read the user’s instructions thoroughly before operating

the unit.

SPECIFICATIONS

Operating Temperature : 23°F to 122°F

Clock Functions

Radio Control : Auto synchronize current time and

date by Radio signal generated from

the U.S. Atomic Clock

Calendar : Day of week in English /

French / Spanish

Current month / day format

Clock Time : 12-hour format

Alarm Duration : 2 minute crescendo

Snooze : 8 minutes

Accuracy : +/-0.5 second/day

(when RF is disabled)

Temperature Measurement

Indoor Measurement : 23°F to 122°F (-5°C to 50°C)

Temperature Resolution : 0.2°F (0.1°C)

TemperatureAccuracy : 23°F to 32°F +/-35.6°F

(-5°C to 0°C +/- 2.0°C)

32°F to 104°F +/- 33.8°F

(0°C to 40°C +/- 1.0°C)

104°F to 122°F +/-35.6°F

(40°C to 50°C +/- 2.0°C)

General Specification

Battery Type : Two(2)UM-4or“AAA”size

1.5V battery

Unit Dimension : 4.09 x 2.52 x .83 inches

or 104 x 64 x 21 mm (H x W x D)

Unit Weight : 2.82 ounces or 80 g

(without battery)

With carrying pouch

CAUTION

— The content of this manual is subject to change without

further notice.

— The specification of this product can be changed without

any notice.

— Due to printing limitation, the displays shown in this

manual may differ from the actual display.

— The contents of this manual may not be reproduced

without the permission of the manufacturer.

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its

operation, please contact our customer care department at

541-868-8205 or via email at [email protected].

WARRANTY

This product is warranted to be free of manufacturing defects for a

period of 90 days from date of retail purchase. Defective product

should be directed to the place of retail purchase for exchange.

Should this not be possible, contact our customer care department

for assistance and a return material authorization. No returns may

bemadewithoutareturnauthorization.Warrantyexchangesrequire

proof of date of purchase (purchase receipt showing date, place and

product purchased).

This warranty does not cover product subjected to abuse, misuse,

accidental damage or tampering.

Table of contents

Other Oregon Scientific Clock manuals

Oregon Scientific

Oregon Scientific Glaze JW208 User manual

Oregon Scientific

Oregon Scientific RM116E User manual

Oregon Scientific

Oregon Scientific CP100 User manual

Oregon Scientific

Oregon Scientific JMR868 User manual

Oregon Scientific

Oregon Scientific MSR939 User manual

Oregon Scientific

Oregon Scientific PROJI BAR369P User manual

Oregon Scientific

Oregon Scientific RM888PA User manual

Oregon Scientific

Oregon Scientific RM318PU User manual

Oregon Scientific

Oregon Scientific KD500 User manual

Oregon Scientific

Oregon Scientific JM889 User manual

Oregon Scientific

Oregon Scientific RRM902 User manual

Oregon Scientific

Oregon Scientific RM336PES User manual

Oregon Scientific

Oregon Scientific RA313P User manual

Oregon Scientific

Oregon Scientific DP200 User manual

Oregon Scientific

Oregon Scientific RMR391PU User manual

Oregon Scientific

Oregon Scientific RM308PX User manual

Oregon Scientific

Oregon Scientific RRM320P User manual

Oregon Scientific

Oregon Scientific RMR500ES User manual

Oregon Scientific

Oregon Scientific BAR332ES User manual

Oregon Scientific

Oregon Scientific RM818PA User manual

Oregon Scientific

Oregon Scientific TW223 User manual

Oregon Scientific

Oregon Scientific TR119 User manual

Oregon Scientific

Oregon Scientific JMR838WFA User manual

Oregon Scientific

Oregon Scientific PRYSMA RMR221P User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

La Crosse Technology

La Crosse Technology WS-8256-AL user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

La Crosse Technology

La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology

La Crosse Technology W86531 owner's manual

Sharp

Sharp SPC900 instruction manual

La Crosse Technology

La Crosse Technology 404-50447 quick start guide

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual