Oregon Scientific RM622P User manual

CONTENTS

Contents ................................................................. 1

Introduction ............................................................. 2

Product Overview ................................................... 3

Front View ......................................................... 3

Back View ......................................................... 4

LCD Display ...................................................... 5

Getting Started ........................................................ 5

Batteries ............................................................ 5

AC Adaptor ....................................................... 6

Clock ........................................................................ 6

Turn Clock ON / OFF ........................................ 6

Setting the Clock Manually .................................... 7

Clock Mode ....................................................... 7

Clock Setting Mode ........................................... 7

The Alarm Function ................................................ 7

Basic Functions ................................................. 7

Displaying the Alarm Time ................................ 7

Setting the Alarm Time ..................................... 7

Activating / Deactivating the Alarm ................... 8

The Snooze Function .............................................. 8

The Projector Function ........................................... 8

Activating the Projector ..................................... 8

The Backlight .......................................................... 9

Indoor Temperature ................................................ 9

Maximum and Minimum Temperatures ............ 9

Reset System .......................................................... 9

Safety and Care ....................................................... 9

Warnings .................................................................. 9

Troubleshooting .................................................... 10

Specifications ........................................................ 10

About Oregon Scientific ....................................... 11

EC-Declaration of Conformity .............................. 11

Easy Thermo Projection Clock

Model: RM622P / RM622PU

User Manual

INTRODUCTION

Thank you for selecting the Oregon ScientificTM Easy

Thermo Projection Clock (RM622P / RM622PU). This

device bundles precise time keeping, alarm, and

temperature monitoring features into a single tool you

can use from the convenience of your home.

In this box, you will find:

•RF projection clock

•Batteries (2 x UM-3 (AA) 1.5V)

• 3.0V AC/DC adaptor with jack

Keep this manual handy as you use your new product.

It contains practical step-by-step instructions, as well as

technical specifications and warnings you should know.

PRODUCT OVERVIEW

FRONT VIEW

The Easy Thermo Projection Clock features:

1. SNOOZE / LIGHT button

2. UP and DOWN keys

3. MODE button

4. MEM button

5. ALARM button

6. Projector feature

7. LCD display

BACK VIEW From the back view, the Easy Thermo Projection Clock

features:

1. FOCUS knob

2. IMAGE ROTATION knob

3. Power adaptor socket

4. Battery compartment

5. Projector on switch

6. Table stand

7. RESET hole

LCD DISPLAY

1. Radio-controlled clock

2. Radio frequency signal

3. Alarm on icon

4. Alarm time indicator

5. Alarm time or calendar

6. Low battery

7. Temperature

GETTING STARTED

BATTERIES

Batteries are supplied with this product:

2 x UM-3 (AA) 1.5V batteries

Insert batteries before first use, matching the polarity

(+ and -) as shown in the battery compartment. Please

press RESET after each battery change.

NOTE Do not use rechargeable batteries.

shows when batteries are low.

NOTE It is recommended that you use alkaline batteries

with this product for longer performance.

AC ADAPTOR

The main unit has a 3.0V AC/DC adaptor with jack, which

provides continuous clock projection.

Inserting the adaptor:

CLOCK

The clock automatically synchronizes the current time

and date when it is brought within range of the radio

signal DCF77 generated from Frankfurt, Germany for

Central Europe (model RM622P) or MSF60 generated

from Rugby, England (model RM622PU).

NOTE Initial reception takes 2-10 minutes, and is initiated

when you first set up the unit, and whenever you press

RESET. Once complete, the reception icon will stop

blinking.

TURN CLOCK ON / OFF

To activate the RF signal, press both the and the

buttons at the same time for 2 seconds.

To deactivate the RF signal, press both the and the

buttons at the same time for 2 seconds.

NOTE The RF signal icon appears when it is activated

and disappears when it’s deactivated.

SETTING THE CLOCK MANUALLY

CLOCK MODE

The top line of the clock display shows hours, minutes

and seconds / day. The second line shows calendar/

alarm time and indoor temperature.

To toggle between seconds and day display, press the

MODE button.

CLOCK SETTING MODE

To adjust the clock settings manually without automatic

RF synchronization, remember to disable the Radio

Reception first.

To change calendar, language, time, day of the week

and time settings:

1. Press and hold MODE for 2 seconds to enter setting

mode.

2. Press or to change settings. (To reach the

setting you want quickly, press and hold or ).

3. Press MODE to confirm. (Press the MODE button

again to set day, language, day of the week, hour or

minutes).

NOTE Using the MODE button, the order of the flashing

items is: month, day, language, day of the week, hour,

minutes and then exit clock setting mode.

THE ALARM FUNCTION

BASIC FUNCTIONS

When the alarm goes off, you can turn it off by pressing

the button.

NOTE The alarm will automatically stop ringing after 1

minute. But after 8 minutes, the alarm will sound once

more unless the button is pressed.

DISPLAYING THE ALARM TIME

By default, the unit’s LCD screen displays the current

date and month.

To display the alarm time instead, press the button.

SETTING THE ALARM TIME

To set the alarm time:

1. Press and hold the button for 2 seconds. (The

alarm time “hour” will flash).

2. Use the and buttons to set the hour.

3. Press the button again. (The alarm time “minutes”

will flash).

4. Use the and buttons to set the minutes.

5. Press the button to exit the setting alarm time

mode.

The alarm time should now be displayed.

ACTIVATING / DEACTIVATING THE ALARM

To activate the alarm on, press the button. (The alarm

bell icon will appear to the left of the alarm time).

To deactivate the alarm, press the button so the alarm

bell icon disappears.

THE SNOOZE FUNCTION

To use the Snooze function, while the alarm is ringing,

press the SNOOZE / LIGHT button to stop the alarm

sound and activate the Snooze function.

When the Snooze function is enabled, the Snooze

period will last 8 minutes.

NOTE The Snooze function will be disabled if the

button is pressed.

NOTE When the Snooze function is enabled, the Bell

Icon will be flashing.

THE PROJECTOR FUNCTION

The projector displays the time on your ceiling for easy

viewing in a darkened room.

ACTIVATING THE PROJECTOR

To turn on the projector:

Press the SNOOZE / LIGHT button to activate the

projector for 5 seconds.

Slide the PROJECTION switch to ON to activate

continuous projection. However, this function will not

work unless the AC/DC adaptor is used.

If the unit is being run on batteries then the PROJECTION

ON switch does not need to be on. If you hit the SNOOZE

button then the projection will happen anyway.

To deactivate the projection, slide the PROJECTION

ON switch to the “off” position.

THE BACKLIGHT

The user can press the SNOOZE / LIGHT button at the

top of the unit to enable the backlight function.

NOTE The backlight will last for 5 seconds.

INDOOR TEMPERATURE

The temperature is shown in Centigrade (°C). The unit is

capable of measuring temperatures within the -5°C and

50°C range.

MAXIMUM AND MINIMUM TEMPERATURES

The maximum and minimum recorded temperatures will

be automatically stored in memory.

To display maximum and minimum temperatures, press

the MEM button to rotate through the maximum, minimum

and current temperatures.

The respective “MAX” or “MIN” indicator will be displayed.

To clear the memory, hold down the MEM button for two

seconds.

The maximum and minimum temperatures will be erased.

NOTE If you press the MEM button now, the maximum

and minimum temperatures will have the same values as

the current ones until different readings are recorded.

RESET SYSTEM

The RESET button is located in the main unit battery

compartment. Press RESET when you change the

batteries and whenever performance is not behaving as

expected.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol-

free, mild detergent. Avoid dropping the product or

placing it in a high-traffic location.

WARNINGS

This product is designed to give you years of service if

handled properly. Oregon Scientific will not be responsible

for any deviations in the usage of the device from those

specified in the user instructions or any unapproved

alterations or repairs of the product. Observe the following

guidelines:

•Never immerse the product in water. This can

cause electrical shock and damage the product.

•Do not subject the main unit to extreme force,

shock, or fluctuations in temperature or humidity.

•Do not tamper with the internal components.

•Do not mix new and old batteries or batteries of

different types.

•Do not use rechargeable batteries with this product.

•Remove the batteries if storing this product for a

long period of time.

•Do not scratch the LCD display.

NOTE The technical specification of this product and

contents of this user guide are subject to change without

notice. Images not drawn to scale.

TROUBLESHOOTING

PROBLEM SYMPTOM REMEDY

Calendar Strange date / Change language

month

Clock Cannot adjust Disable clock

clock

Cannot auto- 1.Adjust batteries.

synchronize the 2.Press RESET

date and time 3.Manually activate

clock feature

Temp Shows "LLL" or Temperature is out-of-

"HHH" range

SPECIFICATIONS

DIMENSIONS

L x W x H 134 x 52 x 82 mm

(5.27 x 2.04 x 3.23 inches)

Weight 162 g (5.71 ounces)

without battery

TEMPERATURE

Unit °C

Indoor Range -5°C to 50°C

Resolution 0.1°C

CLOCK

RF Clock Auto or manual (disabled)

Clock display HH:MM:SS

Hour format 12hr AM/PM

(Model RM622PU)

24hr (Model RM622P)

Calendar DD/MM; weekday in

5 languages (E, D, F, I, S)

Alarm Single alarm with

1-minute crescendo

This manual suits for next models

Table of contents

Other Oregon Scientific Clock manuals

Oregon Scientific

Oregon Scientific RM313PA User manual

Oregon Scientific

Oregon Scientific PRYSMA G RRM222P Installation instructions

Oregon Scientific

Oregon Scientific TW331 User manual

Oregon Scientific

Oregon Scientific RM303P User manual

Oregon Scientific

Oregon Scientific RM806 User manual

Oregon Scientific

Oregon Scientific BAR669H User manual

Oregon Scientific

Oregon Scientific BAR332ES User manual

Oregon Scientific

Oregon Scientific EMR801 User manual

Oregon Scientific

Oregon Scientific RMR132HG User manual

Oregon Scientific

Oregon Scientific JM889 User manual

Oregon Scientific

Oregon Scientific BAR339PA User manual

Oregon Scientific

Oregon Scientific PROJI BAR369P User manual

Oregon Scientific

Oregon Scientific rm318p User manual

Oregon Scientific

Oregon Scientific RMB899P User manual

Oregon Scientific

Oregon Scientific RM968 User manual

Oregon Scientific

Oregon Scientific RM116E User manual

Oregon Scientific

Oregon Scientific RM313P User manual

Oregon Scientific

Oregon Scientific RM928 User manual

Oregon Scientific

Oregon Scientific PRYSMA G User manual

Oregon Scientific

Oregon Scientific BAR368P User manual

Oregon Scientific

Oregon Scientific PRYSMA G User manual

Oregon Scientific

Oregon Scientific RM826 User manual

Oregon Scientific

Oregon Scientific JW108 User manual

Oregon Scientific

Oregon Scientific BAR339P User manual

Popular Clock manuals by other brands

Silicon Laboratories

Silicon Laboratories SI5324 manual

Heathkit

Heathkit GC-1005 Assembly manual

Andrew O'Malley

Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing

ALGE-Timing ASC3 manual

Bodet

Bodet Profil 960 Installation and operating instructions

Nixie Clock

Nixie Clock Divergence Meter user manual

La Crosse Technology

La Crosse Technology WS-8256-AL user manual

Mini Gadgets

Mini Gadgets MCPro user manual

Casio

Casio TMR-200 user guide

Progetti

Progetti ILTEMPOSTRINGE Directions

BVItech

BVItech BV-101 instruction manual

Progetti

Progetti KALIMERO Directions

La Crosse Technology

La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology

La Crosse Technology W86531 owner's manual

Sharp

Sharp SPC900 instruction manual

La Crosse Technology

La Crosse Technology 404-50447 quick start guide

Datexx

Datexx DF0063 quick guide

LG LEC-005 owner's manual