OpenEye OE-GRANITE1U User manual
GraniteRack 1U Chassis
Digital Storage System
User Manual
Please carefully read these instructions before using this product.
Save this manual for future use.
OE-GRANITE1U
model no.
ii 28079AB
28079AB iii
OpenEye® GraniteRack 1U Rackmount Chassis
User Guide
Manual Edition 28079AB – JULY 2008
©2000-2008, OPENEYE
All Rights Reserved
No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the
Software License Agreement. OPENEYE shall not be liable for technical or editorial errors or omissions contained herein. The information in
this document is subject to change without notice.
The information in this publication is provided “as is” without warranty of any kind. The entire risk arising out of the use of this information
remains with recipient. In no event shall OPENEYE be liable for any direct, consequential, incidental, special, punitive, or other damages
whatsoever (including without limitation, damages for loss of business profits, business interruption or loss of business information), even if
OPENEYE has been advised of the possibility of such damages and whether in an action or contract or tort, including negligence.
This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to OPENEYE. OPENEYE,
OpenEye, HDDR, and High Definition Digital Recorder are registered trademarks of OPENEYE in the United States and elsewhere; Windows,
and Windows XP Embedded are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or
registered trademarks of the respective owners.
The following words and symbols mark special messages throughout this guide:
WARNING: Text set off in this manner indicates that failure to
follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to
follow directions could result in damage to equipment or loss of
information.
OPENEYE
Liberty Lake, WA ●U.S.A.
ii 28079AB
NOTES ON HANDLING
Please retain the original shipping carton and/or packing materials supplied with this product. To ensure the integrity of this product when
shipping or moving, repackage the unit as it was originally received from the manufacturer.
Do not use volatile liquids, such as aerosol spray, near this product. Do not leave rubber or plastic objects in contact with this product for
extended periods of time. Rubber or plastic objects left in contact with this product for extended periods of time will leave marks on the
finish.
The top and rear panels of the unit may become warm after long periods of use. This is not a malfunction.
NOTES ON LOCATING
Place this product on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand.
IMPORTANT SAFEGUARDS
1. Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and safety
instructions.
2. Power Sources – This product should be operated only from the type of power source indicated on the label. If you are not sure of
the type of power supply to your home or business, consult your product dealer or local power company
3. Ventilation – Slots and openings in the product are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked or covered. The product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered
to.
4. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that
produce heat.
5. Water and Moisture – Do not use this product near water. Do not exceed the humidity specifications for the product as detailed in
the Appendix section in this manual
6. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
7. Power Cord Protection – Power-supply cords should not be routed so that they are not likely to be walked on or pinched by items
placed against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the
product.
8. Overloading – Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire
or electrical shock.
9. Lightning – For added protection for this product during storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage to the product due to lightning and power line surges.
10. Object and Liquid Entry Points – Never insert foreign objects into the any part of this product, as they may touch dangerous
voltage points or short-out parts that could result in fire or electrical shock. Never spill liquid of any kind on this product.
11. Location – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious
personal injury and serious damage to the unit.
12. Burden – Do not place a heavy object on or step on this product. The object may fall, causing serious personal injury and serious
damage to the unit.
28079AB iii
NOTES ON CLEANING
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of
solvent, such as thinner and benzene, as they may damage the surface of this product.
If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.
NOTES ON MAINTENANCE
This storage unit is designed to last for long periods of time. To keep your unit always operational we recommend regular inspection
maintenance (cleaning parts or replacement). For details contact your nearest dealer.
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the DVR unit. Read the following information carefully.
Moisture condensation occurs during the following cases:
When this product is brought directly from a cool location to a warm location.
When this product is moved to a hot and humid location from a cool location.
When this product is moved to a cool and humid location from a warm location.
When this product is used in a room where the temperature fluctuates.
When this product is used near an air-conditioning unit vent
When this product is used in a humid location.
Do not use this product when moisture condensation may occur.
If this product is used in such a situation, it may damage internal components. Remove any CD discs, connect the power cord of the unit to
the wall outlet, turn on the unit, and leave it for two to three hours. After two to three hours, the unit will have warmed up and evaporated
any moisture. Keep the unit connected to the wall and moisture will seldom occur.
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
iv 28079AB
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the
product.
28079AB v
TABLE OF CONTENTS
INTRODUCTION.............................................................................................................1
PRODUCT DESCRIPTION.......................................................................................................................................1
FEATURES...............................................................................................................................................................1
CONTROLS AND CONNECTIONS................................................................................3
SYSTEM SPECIFICATIONS.....................................................................................................................................3
FRONT PANEL CONTROLS AND LEDS .................................................................................................................4
REAR PANEL CONNECTORS.................................................................................................................................4
GETTING STARTED ......................................................................................................5
IDENTIFYING INCLUDED COMPONENTS..............................................................................................................5
1U BASICS.....................................................................................................................7
CONNECTING TO A DVR ........................................................................................................................................7
CONNECTING MULTIPLE TO 1U UNITS.................................................................................................................8
SETTING THE 1U SCSI ID.......................................................................................................................................9
SETTING THE 1U MODE .........................................................................................................................................9
TURNING ON THE 1U............................................................................................................................................10
TURNING OFF THE 1U..........................................................................................................................................10
MULTIPLE SCSI FORMAT SUPPORT...................................................................................................................10
SCSI CARD BIOS SETUP............................................................................................11
CONFIGURING THE BIOS.....................................................................................................................................11
vi 28079AB
28079AB 1
INTRODUCTION
PRODUCT DESCRIPTION
The 1U External Storage unit provides convenient storage expansion with the robustness and value expected from OpenEye®. This
storage unit utilizes the JBOD specification to build up to 2TB of external storage or greater through a SATA-SCSI interface. Using
SATA drives makes the usnit affordable and due to their wide availability, allows you to quickly replace individual Hard Disk Drives
(HDDs) when necessary. OpenEye storage units are a perfect match with SCSI-enabled DVR Security systems.
FEATURES
High capacity data storage with capacities over 2TB
High scalability / Ability to stack 5 storage units
48-bit LBA supports Big Drives Technology (exceeding 137 GB HDD)
Maximum capacity reaches 2 TB
Built-in RISC micro controller core improves chip performance
On-board Flash ROM easy for firmware upgrade
Cost-effective and high performance
2 28079AB
NOTES:
Table of contents
Other OpenEye Storage manuals
