One Forall ILifeTV User manual

UNIVERSAL REMOTE CONTROL INSTRUCTION MANUAL

One for All

Set-Top-Box TV Home Theater

Universal Remote Control Key Map

2 1

TV Power Toggle

TV Source

TV Vol+/-

TV CH+/-

TV->STB

TV Mute

TV Power toggle

TV Source

TV Vol+

TV Mute

TV Vol-

AUX Vol+/-

TV CH+/-

TV->STB

AUX Mute

AUX Power toggle

AUX Vol+/-

TV->STB

AUX Mute

Tools

Play/Pause

Stop

Power

Forward

Rewind

REC List

REC

Back

Guide

Cursor Up

Cursor Right

Cursor Left

Cursor Down

VOD

Vol +/-

CH +/-

Home

Audio

Numeric Keypad

Subtitle

Media

Info

TV/Radio

Mute

Color Function Keys

Tools

play/pause

Stop

Power Toggle

Forward

Rewind

Rec List

Record

Back

Guide

Right

Left

Down

VOD

Vol+/-or PT

CH+/-

TV/IRD

Audio

Numerics

Subtitle

Media

Info

TV/Radio

Mute or PT

31 Red

Green

Yellow

Blue

AUX Source

AUX Power

AUX Source

AUX Power

No. Key Description STB Mode (or no

TV/AUDIO programmed)

TV/AUDIO Mode

AUDIO programmed only

TV programmed only TV+AUDIO programmed

The default Set Top Box protocol may be programmed in the ﬁeld using

the following procedure:

• Press the <Home> key, <REC> key and <OK> key simultanously for

3 sec, STB indicator LED will give a conformation blink and remain on.

• Release the keys and press a <Digit> key to select the Default Protocol.

Refer to the table below for the protocol selection.

• The LED will blink, indicating that the Default STB Protocol has been

programmed; the number of blinks corresponds to the Protocol

number selected, i.e. 1 blink for Protocol 1, 2 blinks for Protocol 2, etc.

Sr. No. SW Keys STB Model LED Conﬁrmation

1 Digit2 Humax (eVision logo) Two blinks

2 Digit4 Airties Four blinks

3 Digit5 Kaon (Etisalat logo) Five blinks

4 Digit6 Kaon (eVision logo) Six blinks

5 Digit7 Huawei Seven blinks

6 Digit8 Pace Eight blinks

7 Digit9 Humax (Etisalat logo) Nine blinks

Universal Remote Control Programming

for Etisalat Set Top Boxes

The Set top box protocol can be changed in the ﬁeld to retune the RCU

to another STB using the following procedure:

• Press and hold key ‘Home’ and the relevant digit key together for a minimum

of 3 seconds, until the STB indicator LED blinks two times (of 500 ms each).

The new STB protocol is now programmed to non-volatile memory.

• Power on the STB and try out the dedicated STB buttons. If there is no

reaction on the STB, repeat the previous steps, for each code listed below.

1 Home + Digit2 Humax (eVision logo)

2 Home + Digit4 Airties

3 Home + Digit5 Kaon (Etisalat logo)

4 Home + Digit6 Kaon (eVision logo)

5 Home + Digit 7 Huawei

6 Home + Digit 8 Pace

7 Home + Digit 9 Humax (Etisalat logo)

Protocol Keys STB protocol

number

Quick Start Guide to set up the remote of your TV*

1. Switch on your TV

2. Press and hold the TV button on your remote

for 5 seconds. The TV button will light up.

3. Look up the 4-digit code for your brand

in the adjacent shortlist of brands. (Look at page no. 6)

Enter the 4-digit codes using the digit buttons.

4. Press and hold the Power button. Release the button

immediately as soon as the TV switches off.

(This step normally takes between 5 and 60 seconds).

5. Switch On your TV. Try out the volume channel buttons

on your remote. If those buttons are not working on your

remote control, repeat step4. until some button works.

Note: You can also learn the butttons from your

original remote. See next pages for details.

6. Press the TV button twice (2x) to ﬁnish setup

Important: If you made a mistake: Press the TV button twice to exit setup.

The red light under the TV button turns off. Restart from the beginning

If your brand is missing in this shortlist, look at the complete

BRAND LIST at the end of the user manual

* For the full list of TV brands, visit www.etisalat.ae/elife

Use '9999' as 4-digit code in case you cannot ﬁnd your

brand in the BRAND LIST int the user manual. Note that

‘9999’ may result in a long setup (up to 15 minutes)

Shortlist of brands*

Brands Brand

Name Number

Bang & Olufsen

BenQ

Blue Sky

Bush

Carrefour

Daewoo

Firstline

Funai

Grundig

Hitachi

Insignia

JVC

Loewe

Metz

Mivar

Nokia

Panasonic

Philips

Pioneer

RCA

Samsung

Sanyo

Sharp

Sony

Toshiba

Vizio

0314

0359

0395

0445

0492

0692

1008

1056

1162

1251

1368

1464

1628

1660

1810

1857

2017

2153

2195

2212

2351

2448

2462

2550

2679

3021

3211

• Press and hold the <<TV>> key for 3 seconds; until the setup LED lights up.

This enables the protocol and brand selection function for the TV device, the

mode LED will remain on. To enable selection for AUX device, press <Mute>

key after hold <<TV>> key for 3 secs , the TV-mode led will give a Set-up

Conﬁrmation blink.

• Release the key and enter the 4-digit Brand-id (please refer to brand ID

table guide) for the TV/AUX by pressing each digit key in sequence.

With the ﬁrst 3 digits, the device-LED will give a reverse blink.

At the fourth digit, the device LED gives two reverse blinks and remains on

(the search will include all code sets that are linked to the selected brand,

or it will search through all code sets in the universal database if brand

number 0000 was selected).

• Press the <<POWER>> or <<MUTE>> key continuously; after 5 secs a

power or mute IR-command is transmitted for the next universal code-set

in the code-set list for the selected brand. The device-LED will turn off durin

tranmission of the IR-command. When the <<POWER>> or <<MUTE>>

key is held continuously then subsequent universal code-sets will be selected

automatically and a sequence of standby or mute IR-command of the next

universal code-set is transmitted.

In the case that brand number 0000 was selected the whole database of either

TV or Aux is scanned. The device-LED shows a reverse blink for each transmission.

Turn on the TV/Audio

• Press TV twice to conﬁrm the code. The code that was selected when

TV was pressed twice or when 4 sec timeout happened is the code that

will be programmed into the remote. The RC will give a set-up conﬁrmation

blink and go back to normal operation.

• All LEDs are turned off. Remarks.

• Universal code number “0000” will trigger a search through all codes

available in the remote independent of the brand.

• Timeout for 4 seconds happened if the user hasn’t pressed the TV key twice

to conﬁrm the code. The code will be programmed into the remote;

the RC will give a set-up conﬁrmation blink and go back to normal operation.

• During the setup, if user wants to restart TV device set-up, can press and

holding the <<TV>>key for 3 sec (step ii);if user want to restart AUX device,

can press <Mute> after holding the <<TV>>key for 3 sec, then the set-up

start from the beginning of the auto set-up again (step iii).

* For the full list of Audio devices programming codes, visit www.etisalat.ae/elife

In the case that brand number 0000 was selected the whole database of

either TV or Aux is scanned. The device-LED shows a reverse blink for each

transmission.

• Note that the search sequence continues by going through the whole list

after scanning through the brand list when all code-sets for the brand are

tested. It only stops when all code-sets of the whole database are tested.

• When the TV/AUX turns off or mute, the user must release the POWER or

MUTE key. The user should switch the TV/AUX on again with the original or

the universal remote control it device turn off. Now all keys can be tried

out with the universal remote control (inverse blinking if a universal

function-code is available under the key) including the POWER and MUTE

key. Press <<POWER>> or <<MUTE>> for 5 secs to continue the code-set

selection (item iv, above).

• If the 4 digit code is wrong or if another key than the <<POWER>> or

<<MUTE>> key is pressed after the 4 digits, Auto brand search will be

exited and the unit will not change the universal code-set number for the

respective device.

• Exiting a successful setup is via pressing the TV mode key twice or after

timeout.

Other One Forall Universal Remote manuals

One Forall

One Forall URC-4220 Installation and operation manual

One Forall

One Forall URC-7740 User manual

One Forall

One Forall URC-1312 User manual

One Forall

One Forall URC-3440 User manual

One Forall

One Forall URC-44 User manual

One Forall

One Forall URC-2981 Product information sheet

One Forall

One Forall SmartControl URC-7960 User manual

One Forall

One Forall URC-9966 User manual

One Forall

One Forall URC-3550 User manual

One Forall

One Forall URC-6210 User manual

One Forall

One Forall URC-3720 User manual

One Forall

One Forall 6-DEVICE PVR User manual

One Forall

One Forall SPORT User manual

One Forall

One Forall URC-7010 User manual

One Forall

One Forall OARI06G User manual

One Forall

One Forall URC-6210 User manual

One Forall

One Forall URC-3300 User manual

One Forall

One Forall URC-3426 User manual

One Forall

One Forall OARN04S User manual

One Forall

One Forall ONE FOR ALL User manual

One Forall

One Forall Zapper URC-6510 User manual

One Forall

One Forall SMART CONTROL PRO User manual

One Forall

One Forall URC-3910 User manual

One Forall

One Forall URC-7800 Cinema 7+ User manual

Popular Universal Remote manuals by other brands

Pronto

Pronto Peel quick start guide

GE 24929 instruction manual

Radio Shack

Radio Shack Wireless Remote Control System owner's manual

AUVIO

AUVIO Universal Home Theater Remote user guide

Philips

Philips Icon SRU4106 Specifications

THOMSON

THOMSON ROC4309 Operating instruction

Philips

Philips pm625S instruction manual

GE RM94931 instruction manual

RCA

RCA RCU600WMS - Universal Remote Control user manual

Blackweb

Blackweb BWB17AV002 user guide

Marmitek

Marmitek DoorGuard 300 user manual

Chunghop

Chunghop RM-L618 user manual

GE RM24965 instruction manual

Anderic

Anderic KTN828 operating manual

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control brochure

Medion

Medion E74023 instruction manual

intensity

intensity RM02A Operation manual

GE RM24950 instruction manual

One Forall iLifeTV User manual

Popular Universal Remote manuals by other brands