Omron FinsGateway User manual

Page: 1

FinsGateway Modem Module User’s Manual

©

©©

FinsGateway

FinsGatewayFinsGateway

FinsGateway

Modem Module

Modem ModuleModem Module

Modem Module

User

UserUser

User’

’’’s Manual

s Manuals Manual

s Manual

First Version

November, 1999

OMRON Corporation

Page: 2

FinsGateway Modem Module User’s Manual

©

©©

Contents

1

11

1 Introduction

IntroductionIntroduction

Introduction ................................

................................................................

................................3

33

3

2

22

2 System Requireme

System RequiremeSystem Requireme

System Requirements

ntsnts

nts ................................

................................................................

.................................................

..................................

.................4

44

4

3

33

3 Setting the PLC Modem

Setting the PLC ModemSetting the PLC Modem

Setting the PLC Modem................................

................................................................

..............................................

............................

..............5

55

5

3.1 Communications Settings for the PLC Modem............................................................................... 5

3.2 Serial Communications Driver Settings.......................................................................................... 7

4

44

4 Operation

OperationOperation

Operation ................................

................................................................

....................................

........

....8

88

8

4.1 Registering Telephone Numbers...................................................................................................... 8

4.2 Serial Communications Driver Settings........................................................................................ 10

4.3 Close the Line ................................................................................................................................. 11

5

55

5 Caution

CautionCaution

Caution................................

................................................................

......................................

............

......12

1212

12

5.1 Communications Settings............................................................................................................... 12

5.2 Speed Setting.................................................................................................................................. 12

5.3 Connecting the PLC Modem........................................................................................................... 13

5.4 Send the AT Command................................................................................................................... 13

6

66

6 Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting................................

................................................................

.........................................................

..................................................

.........................14

1414

14

FinsGateway was developed using Microsoft Visual C++ Version 5.0 and Version 4.1, Borland Delphi Version 2.0,

and Microsoft FrontPage98.

Copyrights of the FinsGateway manual and software are owned by OMRON Corporation, except the following

items.

FinsGateway is released containing the following items copyrighted by Microsoft Corporation. These are:

ATL.DLL; MFC42.DLL; MSVCRT.DLL; MSVCP50.dll; and OLEAUT32.dll. These modules included in

FinsGateway are redistributed based on a license agreement between Microsoft Corporation and OMRON

Corporation. Under this license agreement, these modules cannot be distributed by the customer.

FINS and FinsGateway are trademarks of OMRON Corporation.

Microsoft, Windows, WindowsNT, and Visual C++ are registered trademarks of Microsoft Corporation.

Pentium and Intel are registered trademarks of Intel Corporation.

IBM is a registered trademark of International Business Machines Corporation.

All corporate names and product names mentioned in this manual are trademarks or registered trademarks of

each company.

The symbols äand âare omitted in this document.

Page: 3

FinsGateway Modem Module User’s Manual

©

©©

1 Introduction

The Modem Module is an add-on software for FinsGateway remote communication.

You can develop a remote PLC data acquisition application quickly and easily using the

modem module.

Analog Phone Line

FinsGateway + Modem Module

PLC

Page: 4

FinsGateway Modem Module User’s Manual

©

©©

2 System Requirements

The Modem Module is an add-on software for FinsGateway. Therefore, the environment must

support the operation of FinsGateway. The following system specifications are recommended

to operate the Modem Module.

Page: 5

FinsGateway Modem Module User’s Manual

©

©©

3 Setting the PLC Modem

3 – 1 Communications Settings for the PLC Modem

Modems can detect the communication settings automatically to communicate with the

computer when the computer sends the AT command to the modem. That is why you do not

need to set the communications settings for the computer modem.

However, the PLC modem cannot detect the communications settings, because PLC is not a

computer and does not send the AT command to the modem. The communications settings for

the PLC modem must match the settings of the computer modem and the PLC.

Modems can detect the

communications settings

automatically to communicate with

the computer when the computer

sends the AT command to the

modem.

The communications settings

for the PLC modem must

match the settings of the

computer modem and the

PLC.

Page: 6

FinsGateway Modem Module User’s Manual

©

©©

1. Plug the PLC modem into the COM port of the computer.

2. Click on the Start button, point to Programs, point to FinsGateway, and point to PLC Modem

Setup.

3. Select the COM port for the modem in the COM port box.

4. Select the communications settings in the dialog to match the communications settings of the

PLC.

default: BaudRate: 9600bps, Data Bits: 7, Stop Bit: 1, Parity: Even

5. Click on the [Set] button.

The PLC modem setting is done. Unplug the modem from the computer and plug it into the

PLC.

Page: 7

FinsGateway Modem Module User’s Manual

©

©©

3 – 2 Serial Communications Driver Settings

1. Exit PLC Reporter if it is running.

2. Click on the Start button, point to Programs, point to FinsGateway, and point to Serial

Communications Setup.

3. Click the Communications Line tab and select the check box of the COM port for the modem

to add the phone line.

4. Click [OK] to close the dialog.

5. Set the network address for the added phone line if necessary.

Page: 8

FinsGateway Modem Module User’s Manual

©

©©

4 Operation

Register a telephone number to identify each destination modem and PLC.

4 – 1 Registering Telephone Numbers

1. FgwTapiCaller Settings

Click on the Start button, point to Programs, point to FinsGateway, and point to FgwTapiCaller.

2. Select Phone Line Type

Click on the Dialing Properties button. Select Tone dialing or Pulse dialing in the Dialing

Properties dialog to set the dialing type.

Click the Tone dialing or Pulse

dialing in the Dialing Properties

dialog to select the dialing type.

Page: 9

FinsGateway Modem Module User’s Manual

©

©©

3. Type the name and the telephone number of the destination to call in the telephone number

setup dialog.

You can enter a comma (, ), or – in the telephone number box to make the telephone

number easy to identify.

4. Click on the Modem Setup button in the telephone number setup dialog to start the modem

settings dialog.

Select the modem in the Modem to use field and set the communication settings to match

the settings of the remote PLC.

5. Click the Unit setup button in the telephone number setup dialog to start the modem settings

dialog.

Select the COM port which connecting the Modem．

6. Confirm that the new telephone number appears in the telephone numbers dialog

7. Click [OK] to finish the telephone number setup. Click [cancel] to cancel the settings and

quit.

Page: 10

FinsGateway Modem Module User’s Manual

©

©©

4 – 2 Serial Communications Driver Settings

1. Dial the destination.

After the telephone number is registered, Click the [Dial] button and start dialing. You can

monitor status and perform one-shot communications with a remote PLC after dialing is

completed successfully.

The line status dialog appears when dialing. After dialing is completed successfully, the dialog

is minimized automatically.

Click the icon to see th

e

dialog again.

Omron FinsGateway User manual

Popular Modem manuals by other brands