User's Manual
This manual describes the basic operations and all settings when using vision sensors.
This Manual includes two parts: Operation and Environment Settingas Parts. The
contents are shown as follows.
Operation Part
This part describes how to measure according to the workflow chapter by chapter.
First, prepare to measure by performing "Preparation"g"Design Contents to be
Measurement"g"Set up Contents to be Measurement".
Then, confirm whether or not to measure exactly against the expected objectives by
performing "Measurement Test"g"Adjusting Measurement Contents" repeatly.
Finally, perform "Actual Measurement"g"Verify Measurement Results".
In addition, this part also describes the operations of controller and how to utilize and
analyze the measurement results.
Environment Setting Part
This part describes the measurement environment (camera and lighting, etc.) and the
required system setting and configuration to facilitate the measurement.
In addition, this part also describes the required setting for outputting the measurement
results to external devices and how to store data.
For the Q&A and how to treat the encountered faults, see Appendix. Please read as
required.
