Omron fh series Instruction Manual
Vision Sensor
FH Series
Vision System
Robot Connection Guide
OMRON TM Series Edition
Z447-E1-01
NOTE
•All rights reserved.
•No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the
prior written permission of OMRON.
•No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information
contained in this manual is subject to change without notice. Every precaution has been taken in
the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or
omissions.
Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
Trademarks
•
Sysmac
and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan
and other countries for OMRON factory automation products.
•
This software is based in part on the work of the Independent JPEG Group.
•
Microsoft, Windows, Windows Vista, Excel, and Visual Basic are either registered trademarks or
trademarks of Microsoft Corporation in the United States and other countries.
•
Intel, Core and Pentium are trademarks of Intel Corporation in the U.S. and/or other countries.
•
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation
GmbH, Germany.
•
ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.
•
The SD, SDHC, microSD, and microSDHC logos are trademarks of SD-3C, LLC.
•QR Code is a registered trademark of DENSO WAVE INCORPORATED.
•
MELSEC is a registered trademarks of Mitsubishi Electric Corporation.
Other company names and product names in this document are the trademarks or
registered trade
-
marks of their respective companies.
Copyrights
Microsoft product screen shots used with permission from Microsoft.
1
CONTENTS
Introduction............................................................................................................................................ 2
Terms and Conditions Agreement....................................................................................................... 3
Safety Precautions ................................................................................................................................ 5
Waring..................................................................................................................................................... 6
Precautions for Safe Use...................................................................................................................... 7
Precautions for Correct Use................................................................................................................. 8
Regulations and Standards.................................................................................................................. 9
Related Manuals .................................................................................................................................. 10
Revision History ...................................................................................................................................11
1. Overview....................................................................................................................................... 12
1.1. Overview................................................................................................................................. 12
1.2. Instructions for Building a 3D Robot Vision Application ......................................................... 12
1.3. Robot Programs Covered in this Manual............................................................................... 13
2. System Configuration.................................................................................................................. 14
2.1. Cautions for Robot Equipment............................................................................................... 14
2.2. When Using Vision Sensor FH Series 3D Vision Sensor....................................................... 14
3. Connecting Vision Sensor to Robot Controller........................................................................ 16
3.1. Setting Communications for Robot controller......................................................................... 17
3.2. Connecting and Checking Vision Sensor and Robot Controller ............................................ 20
3.3. Verify Commands Sent/Received .......................................................................................... 22
4. Coordinate System ...................................................................................................................... 26
4.1. Name of Coordinate System.................................................................................................. 26
5. How to Start the Setup Program ................................................................................................ 28
6. Description of the Sample Programs......................................................................................... 29
6.1. Initialization of the Sample Program ...................................................................................... 31
6.2. Switching Scenes on the Vision Sensor................................................................................. 32
6.3. Moving Robot to Robot Image Position.................................................................................. 34
6.4. Register the Current Robot Position in the Vision Sensor ..................................................... 36
6.5. Executing Measurements on Vision Sensor .......................................................................... 36
6.6. Getting the Measurement Results.......................................................................................... 38
6.7. Moving Robot to Robot Command Position at Measurement................................................ 39
7. Component Reference................................................................................................................. 41
7.1. List of Components ................................................................................................................ 41
7.2. Error Message........................................................................................................................ 41
7.3. Component Details................................................................................................................. 42
2
Introduction
Thank you for purchasing the FH Series.
This manual contains information that is necessary to use the FH Series.
Please read this manual and make sure you understand the functionality and
performance of the FH Series before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during
operation.
3
Terms and Conditions Agreement
Warranty, Limitations of Liability
Warranties
●Exclusive Warranty
Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
●Limitations
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-
INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on
infringement by the Products or otherwise of any intellectual property right.
●Buyer Remedy
Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally
shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying
Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the
purchase price of the non-complying Product; provided that in no event shall Omron be responsible for
warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s
analysis confirms that the Products were properly handled, stored, installed and maintained and not
subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer
must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the
suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or
environments. Any advice, recommendations or information given orally or in writing, are not to be
construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN
ANYWAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on
which liability is asserted.
4
Application Considerations
Suitability of Use
Omron Companies shall not be responsible for conformity with any standards, codes or regulations
which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s
request, Omron will provide applicable third party certification documents identifying ratings and
limitations of use which apply to the Product. This information by itself is not sufficient for a complete
determination of the suitability of the Product in combination with the end product, machine, system, or
other application or use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system. Buyer shall take application
responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE
HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
Programmable Products
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or
any consequence thereof.
Disclaimers
Performance Data
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for
the user in determining suitability and does not constitute a warranty. It may represent the result of
Omron’s test conditions, and the user must correlate it to actual application requirements. Actual
performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on improvements and oth-
er reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may
be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish
key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be accurate; however,
no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
5
Safety Precautions
For details on Safety Precautions, refer to Safety Precautions in the Vision System
FH Series 3D Robot Vision Application Construction Guide (Cat. No. Z446).
6
Waring
For details on Waring, refer to Waring in the Vision System FH Series 3D Robot
Vision Application Construction Guide (Cat. No. Z446).
7
Precautions for Safe Use
For details on Precautions for Safe Use, refer to Precautions for Safe Use in the
Vision System FH Series 3D Robot Vision Application Construction Guide (Cat. No.
Z446).
8
Precautions for Correct Use
For details on Precautions for Correct Use, refer to Precautions for Correct Use in
the Vision System FH Series 3D Robot Vision Application Construction Guide (Cat.
No. Z446).
Other manuals for fh series
10
This manual suits for next models
1
Table of contents
Other Omron Accessories manuals
Omron
Omron E8F2 - User manual
Omron
Omron E3Z-G User manual
Omron
Omron E3S-CR62 - Quick start guide
Omron
Omron E3K User manual
Omron
Omron E2EQ User manual
Omron
Omron E3U-GS-S User manual
Omron
Omron E3ZM - User manual
Omron
Omron E2AG User manual
Omron
Omron E3X-DA-S Series User manual
Omron
Omron CJ - 12-2004 User manual
Omron
Omron FJ Series User manual
Omron
Omron Z4M-WR User manual
Omron
Omron E3X-DACLRX1P-M3J 0.3M User manual
Omron
Omron E3MC - User manual
Omron
Omron E2K-L User manual
Omron
Omron E3S-CR62/67 Manual
Omron
Omron ZFV-LTF01 User manual
Omron
Omron F10 User manual
Omron
Omron E3S-CL1 User manual
Omron
Omron Xpectia FZ2-30 User manual
