Omron E3K User manual
LIGHT STATUS
Green = Power On &
Aim is Stable
Red = Unit “Sees”
the Reflector
Yellow = Unit Does Not
“See” the
Reflector
Normal Unit thinks there
is an obstruction,
aim is off or the
reflector is bad.
In Dark On Mode
If unit is in Light On Mode,
the Red & Yellow LED’s
are the OPPOSITE.
Wiring
Sensitivity
Dark Switch
OMRON E3K
Reflector Type Photo Eye
(24 to 240 VAC or VDC)
UL 325 Compliant
Instructions
Set Dark Switch to Dark ON.
Set Sensitivity near Max.
Wire Red & Black to Power.
Wire White to C1.
Wire Green to NO1.
Loosely Mount Photo Eye.
Solidly Mount Reflector, level
with the Photo Eye’s Lens.
Tip Photo Eye Up & Down, Side
to Side, until Red changes to
Yellow to determine Horizontal
& Vertical Center. Tighten.
Other Omron Accessories manuals
Omron
Omron D6T Series User manual
Omron
Omron E2E - 2 User manual
Omron
Omron E3NT - User manual
Omron
Omron E3NX-FA User manual
Omron
Omron E3X-NA - User manual
Omron
Omron E2C-CR5B User manual
Omron
Omron E3ZM - User manual
Omron
Omron EE-SX47 - User manual
Omron
Omron ZFV-SC10 Series User manual
Omron
Omron Z550 User manual
Omron
Omron ZFX-C20 User manual
Omron
Omron Z4LB V2 User manual
Omron
Omron ZFV-C Installation manual
Omron
Omron FZ Series User manual
Omron
Omron F160-2 - 2 User manual
Omron
Omron E3G-L1 User manual
Omron
Omron F3SH-A - User manual
Omron
Omron D6T Series User manual
Omron
Omron E3F2-SUS - User manual
Omron
Omron F250-C50 C55 - SETUP 09-2001 User manual
