Olympus TG-3 User manual
Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a safe
place for future reference.
We recommend that you take test shots to get accustomed to your camera
before taking important photographs.
The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Instruction Manual
DIGITAL CAMERA
TG-3
2
EN
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you
purchased the camera.
Digital camera Strap Lithium Ion Battery
(LI-92B)
OLYMPUS Setup
CD-ROM
or
USB-AC adapter (F-2AC) USB cable (CB-USB8)
Other accessories not shown: Warranty card
Contents may vary depending on purchase location.
Attaching the camera strap
• Pull the strap tight so that it does not come loose.
3
EN
Names of parts
1Connector cover
2Connector cover lock
3LOCK knob
4 Speaker
5Strap eyelet
6Lens
7Self-timer lamp/LED Illuminator/
AF illuminator
8Flash
9Stereo microphone
0GPS antenna
anbutton
bIndicator lamp
cShutter button
dZoom lever
eMonitor
fINFO (Information display) button
gR(Movie) button
hMode dial
iq(Playback) button
jAbutton
k/Wi-Fi button
lMulti-connector
mHDMI micro connector
nTripod socket
oBattery/card compartment cover
pBattery/card compartment cover
lock
qArrow pad
rF(Up) / F(Exposure
compensation) button
sI(Right) /#(Flash) button
tG(Down) / jY(Sequential
shooting/Self-timer) / (Erase)
button
uH(Left) button
• FGHI instruct to press the up/down/left/right arrow pad.
4
EN
Preparations for shooting
Inserting and removing the battery and card
1
Follow Steps 1, 2and
3to open the battery/card
compartment cover.
• Turn off the camera before
opening the battery/card
compartment cover.
3
1
2
Battery/card compartment
cover
Battery/card compartment cover lock
LOCK knob
2
Insert the battery while sliding the
battery lock knob in the direction of
the arrow.
• Insert the battery as illustrated with the
Cmark toward the battery lock knob.
• Slide the battery lock knob in the
direction of the arrow to unlock, and then
remove the battery.
Battery
lock knob
3
Insert the card straight until it clicks
into place.
• Always use the specified cards with
this camera. Do not insert other types
of memory cards. g“Using the card”
(P. 92)
• Do not touch the metallic parts of the
card directly.
Write-protect
switch
5
EN
To remove the card
Press the card in until it clicks and
comes out slightly, then remove the
card.
21
4
Follow Steps 1, 2and 3to close
battery/card compartment cover.
• When using the camera, be sure to close
the battery/card compartment cover.
11
3
2
6
EN
Charging the battery
1
Check that the battery is in the camera, and connect the USB
cable and USB-AC adapter.
• The battery is not fully charged at shipment. Before use, be sure to
charge the battery until the indicator lamp turns off (up to 5 hours).
Connecting the camera
1
2
3
AC outlet
USB cable
(supplied)
Multi-connector
Indicator lamp
On: Charging
Off: Charged
or
Connector cover
For charging the battery abroad, see “Using your charger and USB-AC
adapter abroad” (P. 92).
Never use any cable other than supplied or Olympus-designated USB cable.
This may cause smoking or burning.
The included F-2AC USB-AC adapter (hereafter referred to as USB-AC
adapter) differs depending on the region where you purchased the camera. If
you received a plug-in type USB-AC adapter, plug it directly into AC outlet.
Be sure to unplug the power plug of the USB-AC adapter from the wall outlet
when the charging is complete or the playback ends.
For details on the battery, see “Handling the Battery” (P. 104). For details on the
USB-AC adapter, see “USB-AC adapter” (P. 107).
• If the indicator lamp does not light, reconnect the USB cable and USB-AC
adapter to the camera.
• If “No Connection” is displayed on the back monitor, disconnect the USB
cable and set [Storage] in [USB Connection] (P. 56) before connecting the cable
again.
7
EN
When to charge the batteries
Charge the battery when the
error message shown on the
right appears.
Error message
Battery Empty
Flashes in red
8
EN
Turning on the camera and making the initial
settings
When you turn on the camera for the first time, a screen appears enabling
to set the language for the menus and messages displayed in the monitor,
and the date and time.
To change the selected date and time, see “Setting the date and time
d[X]” (P. 59).
1
Press the nbutton to turn on the camera, press
FGHI of the arrow pad to select your language and press
the Abutton.
2
Press FG of the arrow
pad to select the year for
[Y].
X
MENU
Back
Y/M/D
YMDTime
-- -- -- --
:..
2014
3
Press Iof the arrow
pad to save the setting
for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- -- -- --
:..
2014
4
As in Steps 2 and 3, press FGHI of the arrow pad to
set [M] (month), [D] (day), [Time] (hours and minutes), and
[Y/M/D] (date order), and then press the Abutton.
• For precise time setting, press the Abutton as the time signal strikes
00 seconds.
5
Use HI to select the
time zone and then press
the Abutton.
• Use
FG to turn daylight
saving time ([Summer]) on
or off.
’14.02.26 12:30
Summer
9
EN
Using basic functions
Taking photographs
1
Press the nbutton to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to P.
In mode P, the camera automatically
adjusts shutter speed and aperture in
response to subject brightness.
3
Frame the shot.
• When holding the camera, take
care not to cover the flash,
microphone or other important
parts with your fingers, etc.
4
Press the shutter button
halfway down to focus.
The camera was unable to focus
if the AF target mark flashes red.
Try focusing again.
• The shutter speed and
aperture value are displayed
in red if the camera is unable
to achieve optimal exposure.
Press halfway
PP
F6.9F6.91/4001/400
Shutter
speed
Aperture
value
AF target
5
To take the picture, gently
press the shutter button all the
way down while being careful
not to shake the camera.
Press
halfway
Press the rest of
the way down
10
EN
Viewing photographs (Playing back images)
Turn on the camera.
Press the qbutton.
• Your most recent photograph is displayed.
• Press HI to select an image.
q button Arrow pad
Displays the
previous frame
Displays the
next frame
’
14/02/26 12:30
4/30
4/30
Still image
Index display
• In single-frame playback, press the zoom lever to the
W side for Index playback.
• Use FGHI to move the cursor.
• Press the zoom lever to the T side, or press the A
button for single-frame playback.
’14/02/26’14/02/26 12:30
Close-up playback
• In single-frame playback, press the zoom lever to the
T side to zoom in up to 10×; press the W side to zoom
out. Press the Abutton to return to single-frame
playback.
• Press FGHI to scroll an image to the direction of
the button you pressed.
12:30’14/02/26’14/02/26 12:30
4/30
4/30
Other manuals for TG-3
1
Table of contents
Other Olympus Digital Camera manuals
Olympus
Olympus PT-051 User manual
Olympus
Olympus FE110 - 5 Megapixel Digital Camera User manual
Olympus
Olympus E-3 User manual
Olympus
Olympus C-990ZOOM User manual
Olympus
Olympus WINDER OM-1 Operating instructions
Olympus
Olympus u 1060 User manual
Olympus
Olympus E-5 User manual
Olympus
Olympus E-10 RS Installation guide
Olympus
Olympus E-510 - EVOLT Digital Camera SLR User manual
Olympus
Olympus FE 100 - 4MP Digital Camera User manual
Olympus
Olympus PT-EP03 User manual
Olympus
Olympus X-760 User manual
Olympus
Olympus BondMaster 600 Installation guide
Olympus
Olympus E-400 User manual
Olympus
Olympus E-1 - Digital Camera SLR User manual
Olympus
Olympus FE 5020 - Digital Camera - Compact User manual
Olympus
Olympus Stylus 1050SW User manual
Olympus
Olympus Stylus 730 User manual
Olympus
Olympus CAMEDIA D-395 Installation guide
Olympus
Olympus XZ-1 User manual
