CERO_Operators Guide_Version 2018-12_01
5.15 Delete all Outputs (Format Data Partition) ...................................................................39
5.16 Format USB Stick ..........................................................................................................39
5.17 Transfer Experiments between two CEROs...................................................................39
6. PH-READER.....................................................................................................40
6.1 General Information pH-Reader .....................................................................................40
6.1.1 Intended Use ................................................................................................................ 40
6.1.2 Precautions when installing the Reader ....................................................................... 40
6.2 Description pH-Reader ...................................................................................................40
6.2.1 The Reader ................................................................................................................... 40
6.2.2 Principle of the pH Monitoring..................................................................................... 41
6.2.3 The pH Monitoring Step by Step .................................................................................. 42
6.2.4 Example Outputs .......................................................................................................... 42
6.3 Installation Procedure pH-Reader...................................................................................44
6.4 Operation with pH-Reader .............................................................................................46
6.4.1 Enable Reader............................................................................................................... 46
6.4.2 Set General Reader Settings ......................................................................................... 46
6.4.3 Enable the pH or the Color Mode................................................................................. 47
6.4.4 Adjust the Settings for the Color Monitoring ............................................................... 48
6.4.5 Adjust the Settings for the pH Monitoring ................................................................... 48
6.4.6 Start an Existing Experiment with enabled pH-Reader ................................................ 49
6.4.7 Follow-up the pH Monitoring of a Running Experiment .............................................. 52
6.4.8 Single Point Measurement during a Running Experiment ........................................... 52
7. MAINTENANCE ...............................................................................................53
7.1 Weekly Maintenance......................................................................................................53
7.2 Decontamination of the CERO ........................................................................................53
7.3 Remove and Re-Install the Front Cover ..........................................................................54
7.4 Remove and Re-Install the Convection Channel .............................................................55
7.5 Replace Hepa Filters .......................................................................................................55
7.6 Replace Tube Holders .....................................................................................................56
7.7 Maintenance pH-Reader.................................................................................................56
7.7.1 Weekly Maintenance pH-Reader ................................................................................. 56
7.7.2 Decontamination pH-Reader........................................................................................ 57
7.8 Check the Memory Space Available................................................................................57
7.9 Yearly Maintenance........................................................................................................57
8. TROUBLESHOOTING .......................................................................................58
8.1 Temperature ..................................................................................................................58
8.1.1 Temperature Too High ................................................................................................. 58
8.1.2 Temperature Too Low .................................................................................................. 58
