Ohlins HO424 User manual

Shock Absorber for Honda MSX125

HO424

Mounting Instructions

Note!

Please note that this image is a general representation

of the product and may differ slightly from your product.

Note!

Please note that during storage and transportation,

especially at high ambient temperature, some of the oil

and grease used for assembling may leak and stain the

packaging. This is in no way detrimental to the product,

wipe off the excessive oil/grease with a cloth.

Note!

Before installing this product, check the contents of the

kit. If anything is missing, please contact an Öhlins dealer

Warning!

Before installing this product, read the Öhlins Owner’s

Manual. The shock absorber is an important part of your

vehicle and will affect the stability.

Kit Contents

Description Part No Pcs

HO424 1

01185-01 2

01185-04 2

00710-01 2

Shock absorber

Sticker Öhlins

C-spanner

Owners manual 07241-02 1

MOUNTING INSTRUCTIONS

Put the motorcycle on a center stand so that

the rear wheel barely touches the ground.

Make sure the motorcycle is in a stable

position.

Remove the fairing on left side. First remove

the screw. Then push the center rivet pin with a

small pin to release it.

Loosen the upper and the lower bolts of shock

absorber.

Mount the Öhlins shock absorber onto the

motorcycle.

Tighten the upper and the lower bolts according

to HONDA service manual.

Reload the rivet the side fairing.Push the

center pin back into original position.

Remount the left fairing.

Warning!

It is advisable to have an Öhlins dealer install the shock

absorber.

Warning!

If working on a raised vehicle, ensure it is securely

supported so that it will not tip over.

Note!

Before mounting this product clean the vehicle

thoroughly.

Note!

When working on this product, always see the Vehicle

Service Manual for vehicle specic procedures and

important data.

Note!

Lower the vehicle so that the suspension is slightly

compressed before tightening the screws.

Caution!

Ensure that all screws are tightened to the correct

torque and that nothing fouls or restricts movement

of the shock absorber when the suspension is fully

compressed or extended.

Retighten the screws on the side fairing

according to HONDA service manual.

Lock the rivet by pushing in the center pin.

MOUNTING INSTRUCTIONS

Öhlins Asia Co., Ltd

700/937 Moo 5,

Tambol Nongkhaka,

Amphur Phantong, Chonburi 20160

Thailand

reserved. Any reprinting or

unauthorized use without the written

permission of Öhlins Racing AB

is prohibited.

Öhlins products are subject to

continuous improvement and

development, therefore, although

these instructions include the most

up-to-date information available at

the time of printing, minor updates

may occur.

To nd the latest information

contact an Öhlins distributor.

Please contact Öhlins if you have

any questions regarding the

contents in this document.

SET-UP DATA

Warning!

Before riding, always make sure that the basic settings

made by Öhlins are according to recommended

Set-up Data. Read about adjustments and setting up

in the Öhlins Owner’s Manual before you make any

adjustments. Contact an Öhlins dealer if you have any

questions about setting up.

ADJUSTMENTS

Part no. MI_HO424_EN_0

Issued 2015-03-02

Recommended set-up

Spring Preload ............................ 7 mm

Compression adjuster ................. 14 Clicks

Rebound adjuster......................... 8Clicks

Spring

Part No ....................................... 60281- 07

Free spring length ....................... 135 mm

Shock absorber data

Length ......................................... 244 mm

Stroke ......................................... 40 mm

Spring Preload

Adjuster

Rebound

Adjuster

Compression

Adjuster

Preload adjustment range ..............[0-19] mm

Popular Motorcycle Accessories manuals by other brands

SRC

SRC B-TRK502-01-01-SL quick start guide

3M Speedglas 9100 MP operating instructions

hepco & becker

hepco & becker 6307520 00 01 manual

HOMCOM

HOMCOM AA0-077 user manual

hepco & becker

hepco & becker 6307558 00 01 manual

Wunderkind Custom

Wunderkind Custom 106503-F15 Installation and safety

Dräger

Dräger HPS 3500 Instructions for use

M-WAVE

M-WAVE SKI manual

Kuryakyn

Kuryakyn 6212 installation instructions

hepco & becker

hepco & becker 6507504 00 01 installation instructions

Tool it

Tool it PROMAX LCD 9.13G manual

Custom Dynamics

Custom Dynamics TruWrapz installation instructions

Roof

Roof RO200 CARBON How to use and maintain

Kabuto

Kabuto Japan IBUKI instruction manual

PUIG

PUIG 5051 Mounting instructions

rizoma

rizoma ZTH050 user manual

Joubert

Joubert 10001711 instruction manual

Sperian

Sperian Optrel p420 manual