OHAUS Valor 1000 User manual

Quick Start Guide Valor™1000

Ohaus Corporation www.ohaus.com iValor

™

1000 Quick Start Guide

PREPARATION FOR USE

Connect the AC Adaptor to the AC mains

supply. Connect the plug to the DC jack

on the bottom of the scale.

The scale may be operated on the AC

mains supply or the built-in rechargeable

battery. The scale must be turned on to

charge the battery.

Level the scale: Adjust leveling feet so

bubble is centered:

SELECTING THE LOCATION:

Place on a firm, steady surface with sufficient space.

Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

Leveling

Bubble

Leveling

Feet

DC Jack

Valor™1000 Quick Start Guide

Valor

™

1000 Quick Start Guide ii Ohaus Corporation www.ohaus.com

SAFETY PRECAUTIONS

For safe and dependable operation of this product, please comply with the following

safety precautions:

•Verify that the input voltage printed on the power Adapter and the plug type matches

the local power supply.

•Make sure that the power cord does not pose an obstacle or tripping hazard.

•Disconnect the product from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the pan.

•Use only approved accessories and peripherals, as available.

•Operate the product only under ambient conditions specified in the Instruction Manual.

•Service should be performed by authorized personnel only.

Quick Start Guide Valor™1000

Ohaus Corporation www.ohaus.com iii Valor

™

1000 Quick Start Guide

CONTROLS

Button Action Function

Short Press Sets display to zero

ZERO

(Enter) Menu Press Confirms settings

Short Press Tares weight of item on pan

TARE

(



)

Menu Press Decrement over and under settings

()

Short Press Stores displayed weight in accumulation memory.

(Displays accumulation data when display is at zero.)

Menu Press Increment over and under settings

(



)

M+

Units

(



)

Long Press Change unit of measure while long-pressing SELECT button

Short Press When setting over and under values,

shift to next digit

SELECT

Units

(



)

Menu Press Change unit of measure with short press of M+

Low

Battery

Indicator

Battery

Charge

Indicator

Level

Bubble

Center of Zero,

NET, Stability, &

Sum icons

7-segment, 6-digit

backlit LCD

Units of measure indicators:

pieces (not used), pounds,

ounces, Kilograms

Control Buttons

Valor™1000 Quick Start Guide

Valor

™

1000 Quick Start Guide iv Ohaus Corporation www.ohaus.com

OPERATION

1. Turning Scale On/Off

To turn scale on, flip toggle switch below right front keyboard. Scale performs a display test, and

then enters the active weighing mode. To turn the scale off, toggle same switch to off position.

2. Zero Operation

Zero is set automatically at Power On (initial zero). To set it manually press ZERO.

The scale must be stable and weight +/- 2% of capacity to accept zero operation.

3. Manual Tare

Place a container on the weighing pan, and press TARE. The display will show a net value of

“0”. To clear the Tare value, press TARE with the pan empty.

4. Weighing Mode

Use this mode to measure the weight of a sample.

To change units, press and hold SELECT; press M+ Unit until the desired unit icon is displayed.

5. Accumulate Mode

Use this mode to store the weight and HI, LO, SUM statistics from a series of samples.

(See Instruction Manual for details.)

6. Check Weigh Mode

Use this mode to compare samples to a target weight range.

(See Instruction Manual for details.)

7. Setting the Backlight

Press and hold ZERO button until [BL---x] is displayed, where x=

0= backlight is turned off

1= backlight is on during weighing

2= backlight is always on

Press TARE to change the setting. Press ZERO to confirm the setting and return to weighing.

Verify the scale: place a known mass on it and check if the reading is accurate.

If not, calibrate, using the Calibration Guide.

*80252979*

P/N 80252979

Other manuals for Valor 1000

Other OHAUS Scale manuals

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual