OHAUS CL Series User manual

Quick Start Guide CL Series Scales

Ohaus Corporation www.ohaus.com iCL Series Scales Quick Start Guide

PREPARATION FOR USE

Release Locks

Before using the scale, release the

Transportation Lock. On scale bottom,

slide the locking pin to the position.

Check Power

Ensure voltage identification label matches

local line voltage. If not, do not connect the

unit. Contact Ohaus or your dealer.

To use battery power, remove battery cover

and insert three LR6 (AA) batteries.

Allow at least 30-60 seconds warm-up time,

for scale to stabilize before operation.

SELECTING THE LOCATION:

Place on a firm, steady surface with sufficient space.

Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

SAFETY PRECAUTIONS

For dependable operation of this product, observe the following precautions:

•Verify that the input voltage printed on the power Adapter and the plug type

matches the local power supply (if using AC power).

•Make sure that the power cord does not pose an obstacle or tripping hazard.

•Disconnect the product from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the pan.

•Use only approved accessories and peripherals, as available.

•Operate the product only under ambient conditions specified in the Instruction

Manual.

•Service should be performed by authorized personnel only.

Transportation

Lock

Power Input Jack

Remove

Battery

Cover to

insert 3

Batteries:

LR6 (AA).

CL Series Scales Quick Start Guide

CL Series Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

DISPLAY

OPERATION

Place the scale on a horizontal flat surface.

Power Up test: All display segments appear briefly on power up.

Once 0appears, the scale is ready for use.

The on left indicates the a stable reading.

Press UNIT/CAL to switch weighing units: ounces, troy ounces, penny weight, grams

Overload: If the applied load exceeds the capacity of the scale,

Eappears. Remove the load immediately.

The scale will return to normal operation.

TARE: Values can be added progressively to a sample:

Press ON/ZERO OFF, the scale display returns to zero.

Add more weight, press ON/ZERO OFF to zero the scale again.

Add weight up to the capacity of the scale.

Place a container on the platform (eg, 20 grams).

Press ON/ZERO OFF. The display shows 0.00.

Add material to the container (eg, 25 grams).

Display shows weight of material – not the container.

When container and material are removed, display will show

weight of container as negative value. To return to normal

operation, press ON/ZERO OFF again.

Low Battery: The display shows Lo when the batteries are weak

and need to be replaced.

*80253049*

P/N 80253049

Symbols for:

Ounces,

Troy ounces,

Pennies,

Grams,

Negative sign

Stability

indicator

Other manuals for CL Series

Table of contents

Other OHAUS Scale manuals

OHAUS

OHAUS Pioneer Balances User manual

OHAUS

OHAUS D500M Technical Document

OHAUS

OHAUS SKIPPER 6000 Quick guide

OHAUS

OHAUS D31P75SD User manual

OHAUS

OHAUS Compass CX Series User manual

OHAUS

OHAUS Dial-O-Gram User manual

OHAUS

OHAUS Ranger Count Plus User manual

OHAUS

OHAUS Adventurer AX124/E User manual

OHAUS

OHAUS JR 300T User manual

OHAUS

OHAUS Emerald Series User manual

OHAUS

OHAUS Adventurer Pro Grain User manual

OHAUS

OHAUS Ranger Count RC1P1502 User manual

OHAUS

OHAUS DIAL-O-GRA 310 User manual

OHAUS

OHAUS 7000 Series User manual

OHAUS

OHAUS PS121 User manual

OHAUS

OHAUS Valor 1000W User manual

OHAUS

OHAUS EXPLORER User manual

OHAUS

OHAUS Compass CX Series User manual

OHAUS

OHAUS Valor 2000W Series User manual

OHAUS

OHAUS Defender 3000 Series User manual

OHAUS

OHAUS ES series User manual

OHAUS

OHAUS Defender 2000 Series User manual

OHAUS

OHAUS defender 7000 User manual

OHAUS

OHAUS SD User manual

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual