Novell CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION User manual

Novell

www.novell.com

QUICK START

novdocx (en) 11 July 2008

Novell Client 2 SP1 for Linux Installation Quick Start

Client

for Linux

2.0 SP1

08/19/2008

Installing the Novell Client for Linux

This document explains how to install the Novell Client for Linux software on a workstation.

For information on installing a preconfigured version of the Novell Client, see “Using Configuration

Files to Preconfigure the Novell Client” in the Novell Client for Linux Administration Guide.

“System Requirements” on page 1

“Using the YaST Control Center to Install the Novell Client” on page 2

“Using the Installation Script to Install the Novell Client” on page 3

“Upgrading From Version 2.0” on page 4

“Uninstalling the Novell Client for Linux” on page 5

SYSTEM REQUIREMENTS

The Novell Client 2.0 SP1 for Linux requires workstations running one of the following:

SUSE®Linux Enterprise Desktop 10 SP2 (32-bit or 64-bit)

openSUSE®10.3 (32-bit or 64-bit)

IMPORTANT: Do not install the 32-bit version of the Novell Client 2.0 SP1 for Linux onto a 64-bit

operating system. If you do so, you will lose the ability to log into the GUI credential provider. You

will see the error message, “Authentication Failed,” and will be unable to log in.

If you want to use the precompiled Novell Client for Linux Virtual File System provided with the

distribution, make sure one of the following packages is installed on your workstation before you

install the Novell Client for Linux. The package that is installed depends on your kernel type.

novfs-kmp-default

novfs-kmp-smp

novfs-kmp-bigsmp

novdocx (en) 11 July 2008

If you want to compile the Novell Client for Linux Virtual File System from sources provided with

the Novell Client for Linux, make sure the following packages are installed on your workstation

before you install the Novell Client for Linux:

gcc

kernel-source

make

For information on using YaST to install packages, see “Installing the Required Packages” in the

Novell Client for Linux Administration Guide.

USING THE YAST CONTROL CENTER TO INSTALL THE NOVELL CLIENT

Using YaST to install the Novell Client for Linux requires the following steps:

1. Installing the Novell Client for Linux Packages

2. Starting or Restarting the Novell Client for Linux

Installing the Novell Client for Linux Packages

1Make sure you have updated the workstation to the latest SUSE Linux Enterprise Desktop

10 SP2 patches.

2Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

3If you are not logged in as root, type the root password, then click Continue.

4Click Software in the left column, then click Add-on Product in the right column.

5Select the appropriate Add-on Product source (such as CD, DVD, or Local Directory), then

click Next.

TIP: Select Local Directory if you downloaded the file from Novell Downloads (http://

download.novell.com).

6Follow the on-screen instructions for the installation source you specified in Step 5.

For example, you might be prompted to insert the Novell Client for Linux CD, or to specify

which local directory contains a copy of the downloaded Novell Client for Linux files.

7Select Yes, I Agree to the License Agreement, then click Next.

8Select Patterns from the Filter drop-down list.

9Select Novell Client for Linux in the Additional Software category.

10 The Novell Client for Linux check box should already be selected. If it is not, select it to

automatically select all packages for installation.

novdocx (en) 11 July 2008

11 Click Accept to install all of the Novell Client for Linux packages.

12 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux” on page 3.

For more information, see “Using the Novell Client Tray Application” in the Novell Client for Linux

User Guide.

Starting or Restarting the Novell Client for Linux

Use any of the following methods to start or restart the Novell Client for Linux:

Restart the Linux Workstation: This is the best way to ensure that the Novell Client for

Linux is completely restarted.

Manually Start the Novell Client: Open a terminal window and log in as root. From the

/opt directory, enter one of the following commands:

New Installations: /opt/novell/ncl/bin/ncl_control start

This command loads all the Novell Client for Linux daemon modules.

Updates: /opt/novell/ncl/bin/ncl_control restart

This command stops and then reloads all the Novell Client for Linux daemon modules.

If either of these commands displays any errors, restart the Linux* machine.

In addition, /opt/novell/ncl/bin/ncl_control status shows whether the Novell Client

for Linux drivers are loaded properly, and /opt/novell/ncl/bin/ncl_control stop stops

all Novell Client for Linux daemon modules.

USING THE INSTALLATION SCRIPT TO INSTALL THE NOVELL CLIENT

NOTE: If you are installing the Novell Client 2.0 SP1 for openSUSE 10.3 using the installation

script, you must verify that the kdelib3 package and the novfs-kmp-xpackage are installed

before you proceed. In the novfs-kmp-xpackage name, xmatches the installed kernel (for

example novfs-kmp-default, novfs-kmp-smp, or novfs-kmp-bigsmp). If you use the YaST

installation method, the packages are added automatically through YaST dependency resolution.

An installation script called ncl_install is provided in the Novell Client for Linux .tar.gz file

that you downloaded from Novell Downloads (http://download.novell.com). This script can be used

to install, update, verify installation, display information, and uninstall the Novell Client directly from

a command prompt using documented RPM commands. This same script is copied to the /opt/

novell/ncl/bin directory during the installation of the Client for later use in verifying or

uninstalling the Client.

novdocx (en) 11 July 2008

Run these commands from the directory where you unarchived the Client download file or from

/opt/novell/ncl/bin after the initial installation. You must be logged in as root to run these

commands.

Table 1 ncl_install Commands

UPGRADING FROM VERSION 2.0

NOTE: Upgrading from an earlier version of the Novell Client for Linux is not supported. You must

upgrade your workstation to Novell Client 2.0 before upgrading to 2.0 SP1.

To use YaST to upgrade from the Novell Client 2.0 for Linux to 2.0 SP1, follow these steps. You

can also use the ncl_install script to upgrade to 2.0 SP1 (see “Using the Installation Script to

Install the Novell Client” on page 3 for more information).

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

2Click Software > Installation Source.

3Select the Novell Client 2.0 for Linux source, click Delete, then click Yes.

4Click Finish.

Command Description

./ncl_install install Installs the Novell Client for Linux.

./ncl_install install force Forces the installation of all Novell Client

for Linux packages.

./ncl_install upgrade Upgrades the Novell Client for Linux.

./ncl_install upgrade force Forces the upgrade of all Novell Client for

Linux packages.

./ncl_install uninstall Uninstalls all Novell Client for Linux

packages.

./ncl_install verify Verifies the installation of all installed

Novell Client for Linux packages.

./ncl_install information Displays summary information for all

installed Novell Client for Linux packages.

./ncl_install files Displays a list of all files contained in the

Novell Client for Linux packages.

novdocx (en) 11 July 2008

5In the YaST Control Center, click Software > Add-on Product.

6Select your Novell Client 2.0 SP1 for Linux installation source (such as CD or Local

Directory), then click Next.

7Follow the on-screen instructions for the installation source you specified in Step 6.

For example, you might be prompted to insert the Novell Client for Linux CD, or to specify

which local directory contains a copy of the downloaded Novell Client for Linux files.

8Select Yes, I Agree to the License Agreement, then click Next.

If you see Dependency Conflict messages informing you that the Novell Client cannot be

installed because of missing NICI and NMASTM dependencies:

8a Select Install novell-nmasclient although it would change the architecture, then click

OK– Try Again.

8b Select Install nici although it would change the architecture, then click OK– Try Again.

9Select Patterns from the Filter drop-down list.

10 Make sure Novell Client for Linux is selected in the Pattern list. It should already have a

check mark in the check box.

You should see all of the Novell Client for Linux packages in the package summary list. All

packages should be selected for installation except for novell-xtier-xplat, which does

not have a check mark.

11 Select novell-xtier-xplat for installation.

12 Right-click the novell-client package in the package summary list, then select All in This

List > Update if newer version available.

The icons to the left of the packages in the package summary list change from a check mark

to the update symbol, except for novell-xtier-xplat.

13 Click Accept to install all of the selected packages.

You will see all the packages being installed on the Package Installation dialog box, followed

by the SuSEconfig dialog box.

14 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux” on page 3.

UNINSTALLING THE NOVELL CLIENT FOR LINUX

Use either of the following methods to uninstall the Novell Client for Linux:

“Using the YaST Control Center to Uninstall” on page 6

“Using the Installation Script to Uninstall” on page 6

novdocx (en) 11 July 2008

Using the YaST Control Center to Uninstall

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications > System > YaST.

KDE: Click the menu button > System > YaST.

2Click Software in the left column, then click Software Management in the right column.

3Select Patterns from the Filter drop-down list.

4Select Novell Client for Linux from the Additional Software category to see the list of installed

packages.

5Click the check box to the left of Novell Client for Linux until a trash can appears.

This automatically selects all of the packages that need to be deleted by changing their icons

to a trash can.

If the Novell Client 2.0 SP1 for Linux was installed as an upgrade to the Novell Client 2.0 for

Linux, the novell-xtier-xplat package icon is not automatically changed to the trash

can.

6Right-click the novell-client package, select All in This List, then click Delete.

7Click Accept to delete all of the selected packages.

YaST might display the following dependency conflict:

product:Client_for_Linux-2.0.0.i686 has missing dependencies

If YaST displays this dependency conflict, select delete Client_for_Linux, then click OK - Try

Again.

YaST displays the progress of the uninstall.

Using the Installation Script to Uninstall

To uninstall the Novell Client for Linux using the installation script, enter./ncl_install

uninstall in a terminal window. You can run this command from the directory where you

unarchived the Client download file or from the /opt/novell/ncl/bin directory. You must be

logged in as root to run this command.

Legal Notice

transmitted without the express written consent of the publisher. For a list of Novell trademarks, see the Novell Trademark and Service Mark list

(http://www.novell.com/company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners. A

trademark symbol (®, TM, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark.

Other manuals for CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION

This manual suits for next models

Table of contents

Other Novell Software manuals

Novell

Novell IDENTITY MANAGER 3.6.1 Installation guide

Novell

Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 4.0 -... User manual

Novell

Novell GROUPWISE 7 - SECURITY POLICIES Instruction Manual

Novell

Novell LINUX ENTERPRISE SERVER 10 SP2 - VIRTUALIZATION WITH... User manual

Novell

Novell APPARMOR 2.0 Instruction Manual

Novell

Novell QUICKBOOKS - INSTALL User manual

Novell

Novell SENTINEL RAPID DEPLOYMENT 6.1 - 06-15-2009 User manual

Novell

Novell LINUX ENTERPRISE DESKTOP 10 - GNOME... User manual

Novell

Novell GROUPWISE 8 - MONITOR User manual

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Installation and operation manual

Novell

Novell GROUPWISE 7 - DATABASES User manual

Novell

Novell IDENTITY MANAGER 3.6.1 User manual

Novell

Novell APPARMOR 1.2 - QUICK GUIDE AND Datasheet

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Programming manual

Novell

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE... Instruction Manual

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - 9-21-2010 ADMINISTRATION GUIDE FOR OPEN ENTERPRISE SERVER 1 SP2... Instruction Manual

Novell

Novell ACCESS MANAGER 3.1 SP2 - README 2010 User manual

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE... Service manual

Novell

Novell GROUPWISE 8 - LINUX-MAC CLIENT User manual

Novell

Novell IFOLDER 3.8 - CROSS-PLATFORM User manual

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Technical manual

Novell

Novell GROUPWISE 8 - TROUBLESHOOTING 3 User manual

Novell

Novell ACCESS MANAGER 3.1 SP2 - README 2010 User manual

Novell

Novell EVOLUTION 2.6 User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

HP ProLiant BL420c user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual

Lexmark

Lexmark Apps Administrator's guide