Outdoor Model (Nortec SETC Only)
The outdoor model of the Nortec SETC provides a weatherproof enclosure that allows the Nortec
SETC to be
installed on rooftops in moderately cool climates. Refer to the Nortec SETC
installation manual that is
provided with the outdoor model to insure proper installation.
Options and Accessories
Condair provides a complete line of options and accessories for every humidification application.
The following options and accessories are available and may have been delivered with your
Nortec SETC/P humidifier. Refer to the installation instructions that came with the accessories
for their
proper installation and operation.
Table 2: Options and Accessories
Freeze Protection Package
(Nortec SETC Only)
Emptying the tank in case of fault or power failure to prevent
freezing. (Factory installed)
Supporting the humidifier 27 inches above the floor (height can be
reduced by cutting legs of floor stand). (field assembled)
Ceiling Mounting Kit (Nortec SE50 Only)
Providing a drain pan and support brackets for mounting an
Nortec SE50
unit from the ceiling.
Adding steam into air ducts
Adding steam into a space remote from the humidifier.
SAM-e Steam Distribution Manifold
Adding steam into air ducts where short absorption is required.
Digital or Analog Control Humidistats
Controlling the output of the humidifier based on sensed RH (can
be mounted in the space being humidified or in the duct).
Communicating RH in a space or duct to the humidifier
Digital or Analog High Limit Humidistats
Preventing over humidification in a duct by shutting down or
throttling down the humidifier when duct RH gets high.
Insuring humidification only occurs when air is moving in a duct.
Condair LINKS 2 (Nortec SETC Only)
Connecting the humidifier to a building management interface.
hardware allows control of the humidifier via BACnet, Lonworks,
Johnson N2, or Modbus.
Condair OnLine (Nortec SETC Only)
User and factory monitoring and configuration of the humidifier via
the internet.
