nooie SA10 User manual
Nooie Smart Power Strip
SA10
Quick Start Guide
Product Overview
Setup
1. Scan the QR codes or go to the App Store to
download the Nooie Home app. Create an account
to add your device.
2. Plug your device directly into a three-pronged
grounded outlet.
3. Follow the instructions in the app to connect the device
to your network.
Product Overview
4 Individually Controlled Outlets
ON/OFF Button
Reset: Press and hold or 5 seconds.
4 USB Ports
3.28ft Power Cord
Note: 5GHz network is not supported.
Product Features
4 USB
Ports
Schedule
& Timer
Overload
Protection
Space-Saving
Design
2.4G
Wi-Fi
Remote
Control
4 Smart
Outlets
Voice
Control
Surge
Protection
LED Indicator
Flashing White
Connecting in progress.
Steady White
The device is working properly.
Key Specifications Customer Care
Have any questions?
Check out the FAQ on our website：
www.nooie.com/support
Want to give your feedback?
Tag us #nooie on social media.
Need more help?
Model
Color
Wi-Fi Requirement
Input Voltage
Maximum Output
USB Port
Compatibility
Working Temp
Product Weight
Product Dimensions
SA10
White and beige
2.4GHz
120V AC 10A 60Hz
120V AC 10A 1200W
5V 2.4A
iOS, Android
-10 ~ 40°C
430g
155 x 105 x 33.6mm
Warning
1. Use your smart power strip only in indoor environments.
2. Keep away from water and flames that may cause fire,electric shock,
or other damage.
3. Make sure the appliance is off before you plug it into the power strip.
4. Do not use the power strip to operate appliances (e.g. stoves, heaters)
where continuous or unsupervised operation could be dangerous.
5. If the power cord is damaged, it must be replaced by the manufacturer or a
qualified service engineer to aoivd any risks to safety.
6. The LED module cannot be replaced.
7. Please do not disassemble the product.
* Please read this manual carefully before using the product.
Electrical equipment designed for
indoor use only.
Alternating Current
Direct Current
The product should not be disposed
of in a landfill. Please recycle or
dismantle the product to minimize
its impact on the environment.
1. 30-day return policy and a two-year
limited warranty.
2. Timely customer service via
3. Lifetime technical support
provided by Nooie.
Warranty Terms
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly. approved by the part responsible for
compliance could void the user’s authority to operate the equipment. This equipment complied with FCC
radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body. The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition
without restriction.
This device has been evaluated and shown compliant with the FCC RF Exposure limits under fixed exposure
conditions (antennas are greater than 20cm from a person's body) when installed in certain specific OEM
configurations. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Due to missing shielding the module is strictly limited to integration by the Grantee himself or his dedicated
OEM integrator under control of the Grantee. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this module installed.
* Please see instructions in the app under the
device settings to connect your device to the
supported third-party controls.
Works with Nooie
Table of contents
