NOMA 043-7020-8 User manual

Instruction Manual

MODEL: 043-7020-8

IMPORTANT:Please read this manual carefully

before running this fan and save it for reference.

Toll-free: 1-866-827-4985

11” (27.9 cm)

Digital Air Circulating Pedestal Fan

With multi-direction oscillation

MODEL: 043-7020-8 contact us 1-866-827-4985

TABLE OF CONTENTS

WARNING:

1. Do not leave the fan running unattended.

2. Keep electrical appliances out of reach of children or inﬁrm persons. Do not

let them use the appliances without supervision.

3.This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to ﬁt in a polarized

outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the

plug. If it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to

defeat this safety feature.

4. If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualiﬁed person in order to avoid a hazard.

5. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concern-

ing use of the appliance by a person responsible for their safety. Young

children should be supervised to ensure that they do not play with the

appliance.

1. Never insert ﬁngers, pencils, or any other object through the grille when fan is

running.

2. Disconnect fan when moving from one location to another.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. DO NOT use fan in window—rain may create electrical hazard.

5. Household use only.

RULES FOR SAFE OPERATION

Rules for safe operation

Round base and column unit assembly

Parts list

Instructions for use

Cleaning

Maintenance instructions

Warranty

CAUTION—Read rules for safe operation and instructions carefully.

6. Once the fan is assembled, do not remove the rotor blade guard again. To

clean, unplug the fan and wipe the fan enclosure and rotor blade guard with a

slightly damp cloth. Do not disassemble the rotor blade guard to clean the

rotor blades.

7. WARNING—To reduce the risk of ﬁre or electric shock, do not use this fan with

any solid-state speed control device.

8. a) Do not operate any fan with a damaged cord or plug. Discard fan or return

to an authorized service facility for examination and/or repair.

b) Do not run cord under carpeting. Do not cover cord with throw rugs,

runners, or similar coverings. Do not route cord under furniture or appliances.

Arrange cord away from trac area and where it will not be tripped over.

RULES FOR SAFE OPERATION

PARTS LIST

Attention: Pictures are for reference only.

MODEL: 043-7020-8 contact us 1-866-827-4985

Front grill

Blade

Upper pole

Lower pole

Chassis

Control window

Handle

Nose

Adaptor connector

Rear grill

ROUND BASE AND COLUMN UNIT ASSEMBLY

1Assemble the chassis

Convex

Concave

Alignment

Align the lower pole assembly with the chassis as shown. Connect them securely

with the bolt.

Align the fan body with the lower pole and rotate clockwise to join.

Assemble the lower pole to the fan body

Choose the angle of the fan head. The fan can be tilted up to 90°.

Manual pitch 90°

MODEL: 043-7020-8 contact us 1-866-827-4985

INSTRUCTIONS FOR USE

Function control area

Function display area

9 air speeds

for normal fan

Air circulating Sleep mode with

3 air speeds

Temperature sensor

activated in normal mode.

Timer set by

remote control

Turn on/o

Press this button to select either 60°, 90° or 120° of oscillation.

This key can be short pressed to cycle the fan speed: 9 speeds in normal mode

and 3 speeds in sleep mode.

This key can be long pressed to switch the wind fan mode. Press repeatedly to

cycle through normal mode, air circulating mode, and sleep mode.

This key can be short pressed to turn on/o air circulating mode. Air circulating

mode allows the black fan head (inside the white cover) to rotate 360° to bring

a wider air supply to the room for better air circulation.

This key can be long pressed to turn on/o the temperature sensor which will

regulate the fan speed in normal mode. When activated, if the temperature of

the environment increases by 1°C, the fan speed will increase by 1. If the

temperature decreases, the fan speed will also decrease.

Oscillation

On/O

Fan mode/

speed

Air circulating/

Temp sensor

mode

INSTRUCTIONS FOR USE

Product parameter

FG18-20CRD 24

Model

Rated

power (W)

Noise

dB (A)

6020

Operating

voltage ( )

Power adaptor 100 – 240 V~

Accessories Input Output

24 V 1.5 A

50/60 Hz 1.0 A

INSTRUCTIONS FOR USE

MODEL: 043-7020-8 contact us 1-866-827-4985

Remote control operation

Notice

The remote control should be normally used within 16' (5 m) in front of the product

and within an angle of 30° to the front.

The battery contains many heavy metals, acids and bases, etc., which are hazardous

to your health. Recycle waste batteries as per your municipal regulations.

Oscillating On/O

Switch the fan mode

Timer setting

Turn on/o temperature

sensor mode

Press "+" or "-" to

set the fan speed

or time

(AAA battery 1.5 V)

Power assembly

drawing

Please use a manganese or alkaline battery

of type "AAA" (not included) and do not use a

non-recyclable battery.

MAINTENANCE INSTRUCTIONS

Additional functions and maintenance

Forced shutdown

If there is no operation during the running of the fan, after 12 hours

of continuous operation, the fan will be forced to shut down

automatically.

Intelligent memory

When the fan is turned o or powered o, it will run in the state

before turning o or power o when the power is powered on

again (the timing function is not memorized).

Automatic reset function of spiral wind oscillating after shutdown

After shutdown, the spiral wind oscillating function is automatically

reset.

Screen-o function

In case of no operation for 60 seconds during normal operation,

the indicator light on the body will be automatically o, but the fan

will continue to operate. Press the ON/OFF button to turn o the

screen when the screen is o, and press the other button to

restore display.

1. Grasp plug and remove from the receptacle or other outlet device. Do not

unplug by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of attachment plug

towards blades.

3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder

over to remove fuse.

4. Risk of ﬁre. Replace fuse only with 2.5 A, 125 V fuse.

5. Close fuse cover. Slide closed the fuse access

cover on top of attachment plug.

6. Risk of ﬁre. Do not replace attachment plug.

It contains a safety device (fuse) that should

not be removed. Discard product if the

attachment plug is damaged.

Note:

1. Do not force the fuse when replacing to reduce the risk of damage.

1. Before cleaning and assembling, unplug the power cord from the outlet.

2. To ensure adequate air circulation to the motor, keep vents at the rear of the

motor housing free from dust, ﬂu, etc. Unplug before cleaning vents with a

vacuum cleaner. Do not disassemble the fan to remove ﬂu.

3. Do not allow water or any other liquid into the motor housing or interior parts.

1. Be sure to unplug from the electrical supply source before cleaning.

2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.

Thoroughly to remove soap ﬁlm with clean water.

3. Be sure not to let water or other liquid enter inside of motor.

4. Do not use any abrasive detergents or solvents to avoid scratching the surface. Do

not use gasoline or paint thinner.

This product carries a one (1) year warranty against defects in workmanship and

materials. NOMA Canada agrees to replace a defective product, within the stated

warranty period, when returned to the place of purchase with proof of purchase.

This product is not guaranteed against wear or breakage due to misuse and/or

abuse.

Imported by NOMA Canada, Toronto, Canada M4S 2B8

Made in China

CLEANING

WARRANTY MAINTENANCE INSTRUCTIONS

MODEL: 043-7020-8 contact us 1-866-827-4985

The fan requires little maintenance. Do not try to ﬁx it by yourself. Refer it to

qualiﬁed service personnel if service is needed.

Table of contents

Languages:

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual