NOMA Landon User manual

Landon

52” LED Ceiling Fan

PRODUCT NO. 052-9608-8

USER MANUAL

READ AND SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

01. SAFETY/CAUTIONS

02. TOOLS REQUIRED

03. EXPLODED VIEW

04. ELECTRICAL SAFETY

05. ASSEMBLY

06. OPERATION

08. TROUBLESHOOTING

07. DYNAMIC BLADE BALANCING KIT

09. MAINTENANCE

10. WARRANTY & DISPOSAL

SAFETY / CAUTIONS

•

TO REDUCE THE RISK OF ELECTRIC SHOCK, ENSURE ELECTRICITY HAS

BEEN TURNED OFF AT THE CIRCUIT BREAKER OR FUSE BOX BEFORE

BEGINNING.

ALL WIRING MUST BE IN ACCORDANCE WITH THE NATIONAL AND

LOCAL ELECTRICAL CODES. ELECTRICAL INSTALLATION SHOULD BE

PERFORMED BY A QUALIFIED LICENSED ELECTRICIAN.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO

NOT USE THIS FAN WITH ANY SOLID-STATE FAN-SPEED CONTROL DEVICE.

IT WILL PERMANENTLY DAMAGE THE ELECTRONIC CIRCUITRY.

CAUTION: TO REDUCE THE RISK OF PERSONAL INJURY, USE ONLY THE

SCREWS PROVIDED WITH THE OUTLET BOX.

THE OUTLET BOX AND SUPPORT STRUCTURE MUST BE SECURELY

MOUNTED AND CAPABLE OF RELIABLY SUPPORTING A MINIMUM OF

35 LB (15.9 KG). USE ONLY UL LISTED OUTLET BOXES MARKED “FOR FAN

SUPPORT.”

THE FAN MUST BE MOUNTED WITH A MINIMUM OF 6’ 11” (2.1 M) FROM

THE TRAILING EDGE OF THE BLADES TO THE FLOOR.

DO NOT PLACE OBJECTS IN THE PATH OF THE BLADES.

TO AVOID PERSONAL INJURY OR DAMAGE TO THE FAN AND OTHER

ITEMS BE CAUTIOUS WHEN WORKING AROUND OR CLEANING THE FAN.

DO NOT USE WATER OR DETERGENTS WHEN CLEANING THE FAN OR

FAN BLADES. A DRY DUST CLOTH WILL BE SUITABLE FOR MOST

CLEANING.

AFTER MAKING ELECTRICAL CONNECTIONS, SPLICED CONDUCTORS

SHOULD BE TURNED UPWARD AND PUSHED CAREFULLY UP INTO THE

OUTLET BOX. THE WIRES SHOULD BE SPREAD APART WITH THE GROUNDED

CONDUCTOR AND THE EQUIPMENT-GROUNDING CONDUCTOR ON ONE

SIDE OF THE OUTLET BOX AND THE UNGROUNDED CONDUCTOR ON THE

OTHER SIDE OF THE OUTLET BOX. ALL SET SCREWS MUST BE CHECKED AND

RE-TIGHTENED WHERE NECESSARY BEFORE INSTALLATION.

•

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND

PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED “ACCEPTABLE

FOR FAN SUPPORT” WITH THE SCREWS PROVIDED WITH THE OUTLET BOX

WARNING: TO AVOID RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS FLANGES) OR THE BRACKETS

WHILE BALANCING THE BLADES OR CLEANING THE FAN. DO NOT INSERT

FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND

PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED “ACCEPTABLE

FOR FAN SUPPORT” OF 35 LB (15.9 KG) OR LESS” AND USE MOUNTING

SCREWS PROVIDED WITH THE OUTLET BOX. MOST OUTLET BOXES

COMMONLY USED FOR THE SUPPORT OF LIGHT FIXTURES ARE NOT

ACCEPTABLE FOR FAN SUPPORT AND MAY NEED TO BE REPLACED. DUE

TO THE COMPLEXITY OF THIS FAN, A QUALIFIED LICENSED ELECTRICIAN

IS STRONGLY RECOMMENDED FOR INSTALLATION.

ATTENTION: PLEASE ENSURE LED BULBS’ TOTAL WATTAGE IS ALWAYS

BELOW 70 W!

IC STATEMENT: This device contains license-exempt transmitter(s)/

receiver(s) that comply with lnnovation, Science and Economic

Development Canada’s license-exempt RSS(s). Operation is subject to

the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference

that may cause undesired operation of the device.

TOOLS REQUIRED

INSTALLATION PREPARATION

Flat-head

screwdriver

Cross-head

screwdriver

Safetyglasses Pliers

Wire cuttersElectrical tape Stepladder Wire strippers

To prevent personal injury and

damage, ensure that the hanging

location allows the blades a

clearance of 6’ 11” (2.1 m)from the

obstruction.

6' 11"

(2.1 m)

30”

(76 cm)

blade edge downrod

installation installation

vaulted

ceiling angle

is not to

exceed 18°

This fan can be mounted with a

downrod on a regular (no-slope) or

vaulted ceiling. Other installations,

such as flush mount, are not

available for this fan.

EXPLODED VIEW

PACKAGE CONTENTS

Installation

Instruction

01.

02.

03.

04.

05.

06.

07.

08.

09.

10.

11.

12.

13.

01 02

12 13 14 15 16 17

03 04

09 10 11

05 06

MOUNTING BRACKET

CANOPY

CANOPY RING

DOWNROD

COUPLING COVER

FAN MOTOR ASSEMBLY

BLADE BRACKETS (5 PCS)

FAN BLADES (5 PCS)

MOUNTING PLATE

20 W LED LIGHT KIT

GLASS SHADE

RECEIVER

REMOTE CONTROL

14.

15.

16.

17.

2-PIN AND 3-PIN EXTENSION

CORDS

BLADE BALANCING KIT

INSTALLATION INSTRUCTIONS

PARTS PACK CONTAINING:

1H 3 6H H

x16

x11

11 x Blade screws with

lock washer

3 x plastic wire nuts

2 x wood screws

3 x Lock washers

2 x Machine screws

1 x Safety cable screw

3 x Flat washers

16 x Flat washers

16 x Fiber washers

5 x Screw retainer

01.

02.

03.

04.

05.

06.

07.

08.

09.

10.

11.

MOUNTING BRACKET

DOWNROD

CANOPY

CANOPY RING

COUPLING COVER

FAN MOTOR ASSEMBLY

BLADE BRACKETS (5 PCS)

FAN BLADES (5 PCS)

MOUNTING PLATE

20 W LED LIGHT KIT

GLASS SHADE

EXPLODED VIEW

DETAIL 03

ELECTRICAL SAFETY

Instructions

•

01.

02.

03.

Making the Electrical Connections

•

Read all safety information and installation instructions before

you begin to install the fan and save instructions.

All set screws of the fan must be checked and re-tightened

where necessary before installation.

To reduce the risk of personal injury, do not bend the blade

brackets when installing the brackets, balancing the blades or

cleaning the fan. Do not insert foreign objects between rotating

fan blades.

Before changing the fan direction, turn off the fan and wait for

the fan blades to stop completely.

The safeguards provided by these safety instructions and by the

separate installation instructions are not meant to cover all

possible conditions and situations that may occur. It must be

understood that common sense, caution and care are factors

which can not be built into this product. These factors must be

supplied by the person(s) installing, caring for and operating the

fan.

WARNING: To avoid risk of electric shock, be sure to shut off

power at the main fuse or circuit breaker box before installing or

servicing this fixture. Turning off the electrical power by using the

light switch is not sufficient to prevent electric shock.

To reduce the risk of injury, install the fan so that the blades are

at least 6’ 11” (2.1 m) above the floor and at least 30” (76 cm)

from the tip of the blades to the wall.

This manual suits for next models

Table of contents

Languages:

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual