Nokia NPD-4 Series User manual
CCS Technical Documentation
NPD-4 Series Transceivers
Issue 1 02/2003 Confidential Nokia Corporation
Assembly
NPD-4
Assembly CCS Technical Documentation
Page 2 Nokia Corporation Confidential Issue 1 02/2003
CCS Technical Documentation Assembly
NPD-4
Issue 1 02/2003 Nokia Corporation Confidential Page 3
Assembly Instructions
Note: Use a new part if the antenna has been removed.
1. Antenna assembly.
1. Snap whip Antenna onto Internal antenna as shown in the above picture. (Picture 1)
2. Align and insert tip of antenna assembly onto the D cover as shown in Picture 2. Make
sure antenna spring contacts are not bent or broken.
3. Gently push on the bottom of the antenna assembly and apply a slight amount of for-
ward force — just enough for the antenna snaps to go in. (Shown in Picture 4 above.)
4. Push down on corners of the Antenna and ensure antennas snaps into position as
shown in picture 5.
NPD-4
Assembly CCS Technical Documentation
Page 4 Nokia Corporation Confidential Issue 1 02/2003
5. Finally, align the whip under the antenna guide and ensure it is remains in place with-
out any additional aid. (See picture 6.)
2. Parts assembly.
If any of the parts within the D-cover assembly have been removed, insert new parts into
their proper locations. The following diagrams (a through i) illustrate in detail the inser-
tion procedures for each assembly part.
CCS Technical Documentation Assembly
NPD-4
Issue 1 02/2003 Nokia Corporation Confidential Page 5
a.) Ground clip assembly
b.) Vibra assembly
c.) DC jack assembly
NPD-4
Assembly CCS Technical Documentation
Page 6 Nokia Corporation Confidential Issue 1 02/2003
d.) Microphone assembly
e.) SIM card assembly
CCS Technical Documentation Assembly
NPD-4
Issue 1 02/2003 Nokia Corporation Confidential Page 7
f.) Midi speaker assembly
g.) Battery connector assembly
NPD-4
Assembly CCS Technical Documentation
Page 8 Nokia Corporation Confidential Issue 1 02/2003
h.) Power button assembly
i.) Keymat assembly
CCS Technical Documentation Assembly
NPD-4
Issue 1 02/2003 Nokia Corporation Confidential Page 9
3. PWB assembly.
Place the PWB assembly inside the D-cover, making sure it is correctly aligned.
4. LCD assembly.
Place the display assembly on top of the PWB inside the D-cover.
Note: Be careful not to bend the display assembly during placement.
Snap the display assembly into the D-cover in the order shown.
Note: Do not touch or apply pressure directly to the display glass.
NPD-4
Assembly CCS Technical Documentation
Page 10 Nokia Corporation Confidential Issue 1 02/2003
5. Screw assembly.
Mount the screws in the order shown above.
Note: Use 23+/-2Ncm (350 RPM max).
Note: Ensure that the display assembly is inserted properly prior to mounting the screws.
6. A-cover assembly.
Mount the A-cover by fitting the guide fins into the D-cover first.
7. B-cover assembly.
Mount the B-cover as shown.
Other manuals for NPD-4 Series
5
Other Nokia Transceiver manuals
Nokia
Nokia NME-2A Series User manual
Nokia
Nokia RH-20 User manual
Nokia
Nokia NME-3 Series User manual
Nokia
Nokia NSB-9 User manual
Nokia
Nokia NSW-6 Series Guide
Nokia
Nokia NHM-1 Series Guide
Nokia
Nokia NSM-3 Installation instructions
Nokia
Nokia NPM–9 Series Installation instructions
Nokia
Nokia RM-696 User manual
Nokia
Nokia NME-2A Series Guide
Nokia
Nokia RM-11 Series Operating instructions
Nokia
Nokia NPM-6 Series Guide
Nokia
Nokia RH-21 Series Guide
Nokia
Nokia NHM-8NX Series Guide
Nokia
Nokia RM-11 Series Operating instructions
Nokia
Nokia NSM-3 Guide
Nokia
Nokia RH-21 Series User manual
Nokia
Nokia RH-41 Series User manual
Nokia
Nokia NME-2A Series User manual
Nokia
Nokia NKC-1X Series Guide
