Nokia BH-303 - Headset - Over-the-ear User manual
Nokia Bluetooth Headset BH-303
9200766/1
6
6
7
8
6
12
6
13
6
11
6
10
6
9
ENGLISH
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
this HS-79W product is in compliance with
the essential requirements and other
relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Reproduction, transfer, distribution or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia Corporation.
Other product and company names
mentioned herein may be trademarks or
tradenames of their respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of ongoing
development. Nokia reserves the right to
make changes and improvements to any of
the products described in this document
without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or income or
any special, incidental, consequential or
indirect damages howsoever caused.
The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
the right to revise this document or
withdraw it at any time without prior notice.
The availability of particular products may
vary by region. Please check with the Nokia
dealer nearest to you.
Unauthorized changes or modifications to
this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and other
0434
ENGLISH
countries. Diversion contrary to law is
prohibited.
Introduction
The Nokia Bluetooth Headset BH-303
allows you to make and receive calls
while on the move. You can use the
headset with compatible devices that
support Bluetooth wireless
technology.
Read this user guide carefully before
using the headset. Also read the user
guide for your mobile device, which
provides important safety and
maintenance information. Keep the
headset and its accessories out of
reach of small children.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
without cables. The mobile device and
the headset do not need to be in line
of sight, but they should be within
10 meters (30 feet) of each other.
Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
The headset complies with the
Bluetooth Specification 2.0 + EDR
that supports the Headset Profile 1.1
and Hands-Free Profile 1.5. Check
with the manufacturers of other
devices to determine their
compatibility with this device.
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
ENGLISH
Get started
The headset contains the following
parts shown on the title page: power
key (1), charger connector (2),
earpiece (3), microphone (4), earloop
(5), volume key (6), indicator light (7),
and answer/end key (8).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the headset are magnetic.
Metallic materials may be attracted to
the headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
Chargers
Check the model number of any charger
before using it with this headset. The
headset is intended for use with the
AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty
and may be dangerous.
When you disconnect the power cord of
any enhancement, grasp and pull the
plug, not the cord.
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the device, as you may damage
the device.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector. The red
indicator light is on while charging.
It may take a while before charging
ENGLISH
starts. If charging does not start,
disconnect the charger, plug it in
again, and retry. Charging the
battery fully may take up to 1 hour
and 30 minutes.
3. When the battery is fully charged,
the indicator light turns to green.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 6 hours and 30 minutes of
talk time or up to 150 hours of
standby time. However, the talk and
standby times may vary when used
with different compatible Bluetooth
devices, usage settings, usage styles,
and environments.
When battery power falls low, the
headset beeps, and the red indicator
light starts to flash.
Switch the headset on or off
To switch on, press and hold the power
key until the headset beeps and the
green indicator light is displayed.
To switch off, press and hold the
power key until the headset beeps and
the red indicator light is displayed
briefly.
Pair the headset
1. Ensure that your mobile device is
switched on and the headset is
switched off.
2. Press and hold the power key until
the green indicator light starts to
flash quickly.
3. Activate the Bluetooth feature on
the mobile device, and set the
device to search for Bluetooth
devices.
4. Select the headset from the list of
found devices.
ENGLISH
5. Enter the passcode 0000 to pair
and connect the headset to your
device. In some devices you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
device once.
If the pairing is successful, the
headset beeps and appears in the
device menu where you can view the
currently paired Bluetooth devices.
The headset is now ready for use.
Basic use
Place the headset on the ear
To use the headset with the earloop,
insert the headset into the catch (9)
and gently push it downwards until it
locks into place. Slide the earloop
behind your ear starting from the top
(10), rotate the earloop for the best fit,
and push the earloop toward your
mouth (11). If you wear an earring,
ensure that it is not accidentally
attached to the earloop. The earloop
has a strap that allows you to wear
the headset on your neck.
To use the headset without the
earloop, detach it (12), and plug the
earpiece into your ear.
Change the cover
The headset may be supplied with
front covers in different colors. To
change the cover, pull the current
cover starting from the top (13), and
push the new cover into place.
ENGLISH
Call handling
To make a call, use your mobile device
in the normal way when the headset is
connected to the device.
If your device supports last number
redialing with the headset, press the
answer/end key twice while no call is
in progress.
If your device supports voice dialing
with the headset, press and hold the
answer/end key when no call in
progress, and proceed as described in
the user guide of your device.
To answer or end a call, press the
answer/end key. To reject an incoming
call, press the answer/end key twice.
To adjust the headset volume, press
the volume key up or down.
To mute or unmute the microphone,
press the middle of the volume key.
To switch the call between the
headset and a compatible device,
press and hold the answer/end key.
Clear settings or reset
To clear all the pairing settings from
the headset, switch off the headset,
and press and hold the power key and
the answer/end key until the red and
green indicator lights start to
alternate.
To reset the headset if it stops
functioning, although it is charged,
plug the headset into a charger, and
press the power key and the answer/
end key at the same time.
Battery information
Your device is powered by a rechargeable
battery. The battery can be charged and
discharged hundreds of times, but it will
eventually wear out. Recharge your
ENGLISH
battery only with Nokia approved
chargers designated for this device.
Unplug the charger from the electrical
plug and the device when not in use. Do
not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime. If
left unused, a fully charged battery will
lose its charge over time.
Never use any charger that is damaged.
Leaving the device in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the
capacity and lifetime of the battery.
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). A device
with a hot or cold battery may not work
temporarily, even when the battery is
fully charged. Battery performance is
particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
• Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
• Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
ENGLISH
batteries, and warp or melt certain
plastics.
• Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
working properly, take it to the nearest
authorized service facility for service.
Disposal
The crossed-out wheeled-bin
symbol on your product,
literature, or packaging reminds
you that in the European Union
all electrical and electronic products,
batteries, and accumulators must be
taken to separate collection at the end of
their working life. Do not dispose of these
products as unsorted municipal waste.
Return the products to collection to
prevent possible harm to the
environment or human health from
uncontrolled waste disposal and to
promote the sustainable reuse of
material resources. Collection
information is available from the product
retailer, local waste authorities, national
producer responsibility organizations, or
your local Nokia representative. For more
information, see product Eco-Declaration
or country-specific information at
www.nokia.com.
Other manuals for BH-303 - Headset - Over-the-ear
1
Table of contents
Other Nokia Headset manuals
Nokia
Nokia BH 103 - Headset - In-ear ear-bud User manual
Nokia
Nokia HS-55W User manual
Nokia
Nokia BH-201 User manual
Nokia
Nokia BH-111 User manual
Nokia
Nokia BH 213 - Headset - Over-the-ear User manual
Nokia
Nokia BH-210 User manual
Nokia
Nokia BH-601 User manual
Nokia
Nokia BH 104 - Headset - Over-the-ear User manual
Nokia
Nokia BH-118 User manual
Nokia
Nokia HS HS 4W User manual
