NGS STARLIGHT User manual
STARLIGHT
USER’S MANUAL
WWW.NGS.EU
English iFrançais iEspañol i Deutsch iItaliano i Português iPolski i
ΕΛΛΗΝΙΚΑ
USER’S MANUAL
2
STARLIGHT
PORTABLE BLUETOOTH TOWER
SPECIFICATIONS
Bluetooth version: 2.1 + EDR
Bluetooth range: 8-10 meters
Speaker output: 20W
Working time: music up to 3 hours
Charging input voltage: DC 5V
Charging time: around 3 hours
Size: 126x126x365 mm
Weight: 1.4 kg
Note: Battery life & charging time may vary
based on usage & types of devices used.
ENGLISH
3
PRODUCT DIAGRAM
1
2
3
4
5
6
7
Carry handle
LED display panel
Speakers
ON/OFF switch
Micro USB charging port
Auxiliary port
USB port
8
9
10
11
12
Stand by / Mode button
Play / Pause button
Previous track / Scan
Backward button
Next track / Scan
Forward button
Volume knob
8 9 10 11
12
2
3
1
4 5 6 7
USER’S MANUAL
4
OPERATING INSTRUCTIONS
TURN ON/OFF THE TOWER SPEAKER
1. Insert battery, and press the power switch to the ON
position. Push MODE button, the tower speaker is power
on.
2. Press the power switch to OFF position, the tower speaker
is power off.
CHARGING THE SPEAKER
The device has built-in rechargeable battery. When the
battery is drained, device would turn OFF automatically. You
would have to recharge the battery.
1. With the power “ON/OFF” switch at the back of the
speaker at OFF position. Plug the Micro USB end of the
included USB cable into the Micro USB charging port. Plug
the other end into a USB port on your computer or other
devices made for USB charging. This takes around 3 hours
to fully charge the speaker.
2. With the power “ON/OFF” switch at the back of the
speaker at ON position. Plug the Micro USB end of the
included USB cable into the Micro USB charging port. Plug
the other end into a USB port on your computer or other
devices made for USB charging. Both red standby indicator
light and red battery symbol will illuminate on the LED
display panel. This takes around 3 hours to fully charge the
device. Once the device is fully charged, red battery symbol
would turn OFF.
PAIRING YOUR MOBILE BLUETOOTH DEVICE TO THE
TOWER SPEAKER
Pairing instructions may differ depending on the device
you are using. Please refer to your device’s user manual for
further information.
ENGLISH
5
Pairing
1. Make sure that your mobile device is within at least 1 meter
of the speaker when trying to pair and that the tower
speaker is power on and in Bluetooth mode.
2. If the tower speaker have not connect to any mobile
device, it will enter pairing mode automatically. The BT
icon of (2) LED display will flashes rapidly when the tower
speaker enter pairing mode.
3. Access the Bluetooth settings in your mobile device and
select Search/Scan for devices. Your mobile device will
begin to search for a Bluetooth signal.
4. You will see the name “NGS STARLIGHT” appear in the
device list. Select it to pair, and if a password or PIN is
needed enter the numbers “0000”.
5. After a successful connection has been made the BT icon
of (2) LED display will light up.
PLAYING MUSIC
1. Make sure that your Bluetooth A2DP (audio/music) mobile
device is paired with the tower speaker.
2. Begin playing music on your mobile device or simply
pressing the (9) play/pause button and you should hear
the music play through the tower speaker. If the music is
low, increase the volume on the tower speaker first, then
adjust your mobile device’s volume.
3. You can control the playing directly from the tower
speaker.
Next track: briefly press the (11) next track button.
Previous track: Briefly press the (10) previous track button.
Increase volume: Turn the volume knob to the right.
Decrease volume: Turn the volume knob to the left.
Play and pause switch: Briefly press the (9) play/pause
button.
USER’S MANUAL
6
LINE IN FUNCTION
1. Turn on the tower speaker.
2. Connect the tower speaker to music player such as MP3/
MP4/PC/mobile phone by AUX line.
3. Press the (8) MODE button to select the AUX mode.
USB DRIVER
1. Turn on the tower speaker.
2. Put the USB driver into (7) USB slot, speaker will play the
music in the USB driver. If the tower speaker does not
enter USB mode, press the (8) MODE button to select the
USB mode.
FM RADIO
1. Press the (8) MODE button to select FM mode.
2. Then press and hold the (9) play/pause button for 3
seconds to carry out an automatic channel search.
3. Once the automatic search is completed, you can switch
between the saved stations by pressing the (9) play/pause
button.
4. To carry out a manual channel search, press the or
button.
ENGLISH
7
HEREBY, LURBE GRUP S.A, DECLARES THAT
THIS SPEAKER IS IN COMPLIANCE WITH THE
ESSENTIAL REQUIREMENTS AND OTHER
RELEVANT PROVISIONS OF DIRECTIVE
1999/5/EC.
If at any time in the future you should need to
dispose of this product please note that:
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
(Waste Electrical and Electronic Equipment
Directive)
MANUEL DE L’UTILISATEUR
8
STARLIGHT
TOUR DE SON BLUETOOTH PORTABLE
SPECIFICATIONS
Bluetooth version : 2.1 + EDR
Portée Bluetooth : 8-10 mètres
Sortie haut-parleur : 20W
Temps de fonctionnement : musique jusqu’à 3 heures
Charge de tension d’entrée : DC 5V
Temps de charge : environ 3 heures
Taille : 126x126x365 mm
Poids : 1,4 kg
Note : l’autonomie de la batterie et le temps de charge
peuvent varier selon l’utilisation et les types d’appareils
utilisés.
FRANÇAIS
9
PRESENTATION DU PRODUIT
1
2
3
4
5
6
7
Poignée de transport
tableau d’affichage LED
Haut-parleurs
Interrupteur Marche/Arrêt
Port de chargement micro USB
Port auxiliaire
Port USB
8
9
10
11
12
Stand by / bouton de mode
Bouton Play / Pause
piste précédente / Scan
Bouton retour
Piste suivante / Scan
Bouton avant (Forward)
Bouton de volume
8 9 10 11
12
2
3
1
4 5 6 7
MANUEL DE L’UTILISATEUR
10
INSTRUCTIONS D’UTILISATION
ALLUMER / ÉTEINDRE LA TOUR DE SON
1. Insérez la batterie et mettez le commutateur de marche en
position ON. Appuyez sur le bouton MODE, la tour de son
s’allumera.
2. Mettez le commutateur de marche en OFF et la tour de son
se désactivera.
CHARGER LE HAUT-PARLEUR
L’appareil a une batterie rechargeable intégrée Lorsque la
batterie est déchargée, l’appareil s’éteint automatiquement.
Vous devrez recharger la batterie.
1. Avec l’interrupteur « ON / OFF » à l’arrière de l’enceinte sur
la position OFF. Branchez l’extrémité micro USB du câble
USB fourni dans le port de recharge micro USB. Branchez
l’autre extrémité dans un port USB de votre ordinateur
ou sur d’autres appareils conçus pour la charge USB. Cela
prend environ 3 heures pour charger complètement le
haut-parleur.
2. Avec l’interrupteur « ON / OFF » à l’arrière de l’enceinte
sur la position ON. Branchez l’extrémité micro USB du
câble USB fourni dans le port de recharge micro USB.
Branchez l’autre extrémité dans un port USB de votre
ordinateur ou sur d’autres appareils conçus pour la
charge USB. Le voyant de veille rouge et le symbole de
la batterie s’affichent en même temps sur le panneau
d’affichage LED. Cela prend environ 3 heures pour charger
complètement l’appareil. Une fois que l’appareil est
complètement chargé, le symbole rouge de la batterie
s’éteint.
COMMENT SYNCHRONISER UN PÉRIPHÉRIQUE
BLUETOOTH MOBILE À LA TOUR DE SON
Les instructions de synchronisation peuvent varier en
fonction de l’appareil que vous utilisez. Reportez-vous au
manuel d’utilisateur de l’appareil pour plus d’informations.
Table of contents
Other NGS Portable Speakers manuals
NGS
NGS ROLLER FLOW User manual
NGS
NGS WILDJAM User manual
NGS
NGS WILDPARTY User manual
NGS
NGS ROLLER REEF User manual
NGS
NGS Roller Coaster User manual
NGS
NGS ROLLER BEAST User manual
NGS
NGS ROLLER RINGO RED User manual
NGS
NGS ROLLER DRUM User manual
NGS
NGS WILDJUNGLE 1 User manual
NGS
NGS Wild Samba User manual
