Nexto Di NVS2500 Operation instructions
NVS2 00
NVS2
5
00
Assemble & Disassembling
•Changing Battery
•Changing SUB PCB
•Changing Hard Drive
1
1. Remove “CASE COVER RUBBER”by Pinset.
Caution : Possible scratch during the operation
2. Remove four screw on the bottom side of NVS2500
Caution : Possible scratch during the operation
3. Remove bottom case.
Tip : There are hook at the middle of case(red circle).
4. Remove hard drive.
5. Remove the BATTERY CONNECTOR
Tip : Remove two connector with holding the plug NOT cable.
6. Remove three Screw on the PCB
Tip : Don’t use machine driver. Use manual driver only.
7. Remove PCB from the case
Tip : Hold on the eSATA connector and lift up slowly.
8. Add shield film
p
rovided to LCD to
p
rotect from dust.
pp
Caution : Be careful not to touch LCD screen by finger. Finger print is hard to
be wiped off
9. Remove sub PCB from LCD
Caution : Double-sided tape between LCD and PCB to stick LCD.
Use tweezers or knife to split PCB and LCD.
Other manuals for NVS2500
2
Other Nexto Di Storage manuals
Nexto Di
Nexto Di NVS1501 User manual
Nexto Di
Nexto Di NEXTO NPS-10 User manual
Nexto Di
Nexto Di ND2730 User manual
Nexto Di
Nexto Di ND2901 User manual
Nexto Di
Nexto Di VIDEO STORAGE-Air User manual
Nexto Di
Nexto Di NVS2500 User manual
Nexto Di
Nexto Di ND2901 User manual
Nexto Di
Nexto Di NEXTO VIDEO STORAGE DOC+ NVS2801-Plus User manual
Nexto Di
Nexto Di Nexto Video Storage User manual
Nexto Di
Nexto Di NVS2500 User manual
