WT17
Wi-Fi WATER TEMPERATURE SENSOR
QUICK START GUIDE
Getting started
1. Please check that your smart phone app is updated.
2. Please also check that your Wi-Fi router is working properly and
operates on 802.11b/g/n 2.4GHz with WPA/WPA2 encryption.
We also support OPEN encryption. i.e. no password
2.4GHz is the standard connection for most routers.
Please do NOT choose 5GHz connection.
Product Features
1. Built-in Wi-Fi module that sends all alerts to your Smartphone
2. Connect to any Normally Open or Normally Closed
Trigger Input. When the Sensor is triggered by a
change of state, it will send an Alert to your Smart
Phone or Tablet
3. Life-time cloud service is included
4. Simple Wi-Fi connection set up with APP
5. Individual tag setting from your smartphone
6. APP records last 30 activations time and date stamped
7. Schedule up to 4 periods per day when unit is automatically
turned off.
3
Installing the APP
１. Before powering up the device, please install our free
NetzHome APP onto your phone.
2. Now complete your User Profile by inputting your email
NetzHome
In the Box
Screwdriver
Wi-Fi Water Temperature Sensor QR Code Card
12
Setting up your DEVICE
Go to the location in the WIFI Building where you eventually wish to
install the Sensor. Look at your smart phone and ensure you have a
good and steady WIFI connection. Exit the APP, open SETTINGS
on your smart phone and click. If you just have a main Router, it will
be showing its reference (or SSID). However, if you have one or
more extenders, they may also be showing underneath. VERY
IMPORTANT –The Sensor will only communicate Alarm signals to
the WIFI Router or Extender that you are about to pair to so it is
essential that you pair it to the closest/strongest WIFI signal/SSID
