NETGEAR Nighthawk R7100LG User manual
Do More
Nighthawk
AC1900 WiFi
LTE Modem Router
Model R7100LG
2
WiFi Network Name and Password
The preassigned WiFi network name (SSID) and password (network
key) are unique to your modem router, like a serial number. Because the
modem router automatically uses WiFi security, you don’t need to set it
up. The WiFi settings are on the label on the modem router.
We recommend that you use the preassigned WiFi settings because
you can check the label if you forget them. You can also log in to the
modem router to change these settings. If you do so, write down the new
WiFi settings and store them in a safe place.
You can write the WiFi settings from the label on your modem router in
this space for easy reference. If you change the WiFi settings, write the
new settings here for easy reference and store this booklet in a safe place.
WiFi network name (SSID):
Network key (password):
3
Check the 3G/4G LED Behavior
The 3G/4G LED on your modem router indicates your modem router’s
mobile broadband signal strength.
If your modem router is connected to a 4G network, the 3G/4G LED lights
the following colors:
LED Behavior for 4G Connection Description
Solid blue Good or fair signal strength.
Solid green Weak signal strength.
Blinking blue or green Data activity is occurring.
If your modem router is connected to a 3G network, the 3G/4G LED lights
the following colors:
LED Behavior for 3G Connection Description
Solid amber Good or fair signal strength.
Solid red Weak signal strength.
Blinking amber or red Data activity is occurring.
For information about the other LED behaviors, see the user manual, which
is available online at downloadcenter.netgear.com.
4
Connect Your Modem Router to a Modem
You can connect your modem router to a cable or fiber modem. If you
insert a micro SIM card into your modem router and you also connect a
modem to the Internet port on the modem router, you can set up failover
mode on your modem router. For more information, see Set Up Failover
Mode on page 13.
¾To connect your modem router to a modem and connect
it to the Internet:
1. Attach and position the antennas:
45°
45° 45°
a. Attach and tighten the antennas on the threaded antenna posts.
b. Position the antennas as shown.
5
2. Connect your modem router to a modem and plug in your
modem router:
a. Unplug your modem, remove and replace the backup battery if it
uses one, and then plug the modem back in.
b. Use the Ethernet cable to connect the modem to the yellow
Internet port on the modem router.
c. Connect the modem router to a power source.
The modem router’s Power LED lights amber and then turns white
when the modem router is ready.
6
3. Connect to the Internet:
You can either use an Ethernet cable or connect with WiFi to the
modem router.
To connect with WiFi, do the following:
a. Make sure that the modem router’s WiFi LED is lit.
b. Find the modem router’s preassigned WiFi network name and
password on the label on the modem router.
c. Open the WiFi connection manager on a WiFi-enabled computer
or mobile device, find the modem router’s WiFi network name,
and use the modem router’s password to connect.
d. Launch a web browser.
If the NETGEAR installation assistant does not display, visit
www.routerlogin.net. If a login window opens, enter admin for
the user name and password for the password.
e. Follow the NETGEAR installation assistant.
The Internet LED lights when the modem router is connected
to the Internet.
7
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your
modem router’s WiFi network and type its password.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check the
instructions or online help that came with that WPS-enabled device. Some
older equipment cannot use WPS.
¾To join the network using WPS:
1. Press the WPS button on the modem router for three to five seconds.
The WPS LED on the modem router blinks white.
2. Within two minutes, on your WPS-enabled device, press its WPS
button or click its onscreen WPS button.
The WPS LED on the modem router lights solid white when the
WPS-enabled device connects to your modem router.
3. Repeat this process to add other WPS-enabled devices.
8
Join the WiFi Network Using the
Modem Router’s WiFi Settings
Use the modem router’s WiFi network name and password to connect your
WiFi-enabled computer or mobile device to the modem router’s network
through WiFi. If you did not change the modem router’s WiFi network
name and password, use the modem router’s preassigned WiFi network
name and password, which are on the label on the modem router.
¾To select your network and enter its password:
1. On your WiFi-enabled computer or mobile device, open the WiFi
connection manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your modem router’s WiFi network name (SSID).
The SSID is on the label on the modem router.
3. Enter the modem router’s password (or your custom password if you
changed it).
The password is on the label on the modem router.
4. Repeat Step 1 through Step 3 to add other WiFi-enabled computer or
mobile device.
9
View or Change the
Modem Router Settings
After you use the NETGEAR installation assistant to set up the
modem router, you can log in to the modem router to view or change its
settings.
Log In to the Modem Router
¾To log in to the modem router:
1. Connect a computer or mobile device to the modem router.
You can connect using a wired connection or a WiFi connection:
• To connect using a wired connection, use an Ethernet cable (not
included) to connect an Ethernet port on your computer to an
Ethernet port on the modem router.
• To connect using a WiFi connection, find the modem router’s
preassigned WiFi network name and password on the label on
the modem router. Open the WiFi connection manager on your
WiFi-enabled computer or mobile device, find the modem router’s
WiFi network name, and use the modem router’s password to
connect.
2. Launch a web browser and visit www.routerlogin.net.
A login window opens.
10
3. Enter admin for the user name and password for the password.
The BASIC Home page displays.
Change the WiFi Network Name and Password
The router’s preset WiFi network name (SSID) and password are on the
label on the router. If you want to change your router’s WiFi network name
and password, log in to the modem router.
¾To change the router’s WiFi network name and password:
1. Launch a web browser from a computer or mobile device that is
connected to the network and visit www.routerlogin.net.
A login window opens.
2. Enter the modem router user name and password.
The user name is admin and the default password is password. Use
the default credentials if you did not change them.
The BASIC Home page displays.
3. Select Wireless.
The Wireless Setup page displays.
4. To change the WiFi network name (SSID), enter a new name in the
Name (SSID) field.
Other manuals for Nighthawk R7100LG
2
Table of contents
Other NETGEAR Modem manuals
NETGEAR
NETGEAR Nighthawk D7000 User manual
NETGEAR
NETGEAR Nighthawk CM2050V User manual
NETGEAR
NETGEAR DM111P - ADSL2+ Ethernet Modem User manual
NETGEAR
NETGEAR CM400 User manual
NETGEAR
NETGEAR LTE Bridge 1110 Series User manual
NETGEAR
NETGEAR LB1110 User manual
NETGEAR
NETGEAR XM128S User manual
NETGEAR
NETGEAR DG834PN - RangeMax ADSL Modem Wireless... User guide
NETGEAR
NETGEAR CM1000 User manual
NETGEAR
NETGEAR CM1000 User manual
NETGEAR
NETGEAR CM500V User manual
NETGEAR
NETGEAR DGND3800B Installation instructions
NETGEAR
NETGEAR DM111P - ADSL2+ Ethernet Modem User guide
NETGEAR
NETGEAR CM1000v2 User manual
NETGEAR
NETGEAR DG834GVSP User guide
NETGEAR
NETGEAR CM700 User manual
NETGEAR
NETGEAR CM1000 User manual
NETGEAR
NETGEAR DM111P - ADSL2+ Ethernet Modem User manual
NETGEAR
NETGEAR DG814 - DSL Modem Internet Gateway User manual
NETGEAR
NETGEAR Netgear DM11PSP User manual
