NetComm NB9WMAXXn User manual
NB9WMAXXN VOIP Setup Guide
(for iiNet)
Configuring your NB9WMAXXN for iiNet VOIP
The following steps will take you through the process of setting up your VOIP connection.
Step 1: Checking Computer Network Settings:
You will need to connect your computer directly to your VOIP device (modem, or ATA) and set
the network connection on your computer to obtain an IP address automatically. Please follow
the instructions appropriate for your operating system below:
Below are the instructions for setting Windows XP to obtain an IP address automatically for
your ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network Connections”.
(If you only see "Network and Internet Connections", open that first, and then click on
"Network Connections".)
3. Right click on “Local Area Connection” and select “Properties”.
4. Double-click on “Internet Protocol”.
5. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
6. Click “OK”, and then click “OK” (or “Close”).
Below are the instructions for setting Windows Vista to obtain an IP address automatically for
your ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network and Sharing Centre”.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre".)
3. Click on “Manage network connections” (on the lefthandside of the window).
4. Right click on “Local Area Connection” and select “Properties”.
5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7. Click “OK”, and then click “OK” again.
Below are the instructions for setting Windows 7 to obtain an IP address automatically for your
ethernet connection:
1. Click on the Start Menu, and go to “Control Panel”.
2. Click on “Network and Sharing Centre”.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre".)
3. Click on “Change adapter settings” (on the lefthandside of the window).
4. Right click on “Local Area Connection” and select “Properties”.
5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.
6. Select "Obtain an IP address automatically", and "Obtain DNS server
address automatically".
7. Click “OK”, and then click “OK” again.
Below are the instructions for setting Mac OS X to obtain an IP address automatically for your
ethernet connection:
1. Click on the Apple Menu, and go to "System Preferences".
2. Click on "Network".
3. Click on “Ethernet” or "Built-in Ethernet".
4. Click on the "Configure" drop-down box, and select "Using DHCP" then click
"Apply".
Step 2: Configuring your VOIP settings:
Troubleshooting Tip
One sided VOIP calls may be an indication of a missing or misconfigured port forwarding rule.
1. Open your web browser and go to the address http://192.168.1.1, using admin as the
username and password.
2. Select “Voice” from the menu on the lefthand side.
3. Enter the following information into the marked sections:
Interface name ppp_8_35 (from drop down menu)
Local selection AUS – Australia (from drop down menu)
Preferred codec list G729, G711A, G711U (from drop down menu)
Preferred ptime 40
Use SIP proxy should be ticked
SIP proxy sip.state.iinet.net.au *
SIP proxy port 5060
Register expire timeout 300
SIP domain name: iinetphone.iinet.net.au
LineEnabled should be ticked
Extension Your iiNet supplied VoIP number
DispName Your iiNet supplied VoIP number
Authentication Name Your iiNet supplied VoIP number
Auth. Password Your iiNet supplied VoIP Password
Leave the remaining options unchanged and click “Save/Apply”.
Your VOIP device should then restart and connect to your iiNet VOIP service.
Other manuals for NB9WMAXXn
1
Other NetComm Network Router manuals
NetComm
NetComm NP2008HS User manual
NetComm
NetComm Dynalink WSG-NP804n User manual
NetComm
NetComm HSPA+ M2M Quick reference guide
NetComm
NetComm Vodafone MachineLink 3G User manual
NetComm
NetComm NB6PLUS4WN User manual
NetComm
NetComm NB702 SHDSL User manual
NetComm
NetComm N3G005W User manual
NetComm
NetComm 3GT1Wn User manual
NetComm
NetComm NF5 User manual
NetComm
NetComm HSPA+ M2M User manual
NetComm
NetComm NTC-400 Series User manual
NetComm
NetComm NB8 User manual
NetComm
NetComm NB16WV-02 User manual
NetComm
NetComm NB6PLUS4W Administrator Guide
NetComm
NetComm NB5 User manual
NetComm
NetComm V300 User manual
NetComm
NetComm NF4V User manual
NetComm
NetComm NTC-6200 User manual
NetComm
NetComm NB5PLUS4 User manual
NetComm
NetComm NF10W User manual
