NetComm PlayStation 3 NB16WV-02 User manual
PlayStation 3 Setup
(NB16WV-02)
Playstation 3 Setup
There are two ways of allowing your Playstation 3 to communicate with the internet. One is
through port forwarding and the other is through the DMZ feature. Port forwarding will enable
specified ports on the router to get access to your Playstation 3 to communicate with the
internet as if they were directly connected by allowing access through. Setting your
Playstation 3 as a DMZ host opens all the ports on the router to allow access to a designated
device.
Before you configure the router, you will need to set a static IP address on your
PlayStation. Follow the instructions at the link below to set a static IP address on
your Playstation:
http://portforward.com/networking/staticip-ps3-playstation-3.htm
You can use an IP address like 192.168.20.100 for example.
You can only forward a port to one location (IP address).
In some cases, this may cause issues when multiple LAN devices (computers,
game consoles, or VOIP ATAs) attempt to use online gaming as same time or
make multiple VOIP service connections.
In these cases, you would need to use an alternate port for any subsequent
connections after the first device.
Please consult your VOIP provider or game manufacturer for assistance with this.
Setting the Playstation 3 as the DMZ Host
1. Navigate to http://192.168.20.1 in a web browser.
2. Enter admin as both the username and password then click Login.
3. Click on Switch to advanced view option at the bottom right hand side of the screen.
4. Select the Forwarding Rules menu then click the Miscellaneous option.
5. Enter the static IP address of the PlayStation in the DMZ Host IP Address field. In this
example, 192.168.20.100 is the IP address of the PlayStation.
6. Click on the Save/Apply button.
7. Reboot the modem. (See the last page of the guide for rebooting instructions)
Adding Port Forwarding Rules for Playstation 3
1. Navigate to http://192.168.20.1 in a web browser.
2. Enter admin as both the username and password then click Login.
3. Click on Switch to advanced view option at the bottom right hand side of the screen.
4. Select the Forwarding Rules menu then click the Port Forwarding option.
5. Enter the port number or port range into the Service Port field.
The ports for Playstation 3 are: 80, 443, 3478, 3479, 3480, 3658, 5223 and 8080
6. Enter the IP address of the PlayStation that you wish to port forward to in the Server IP
field. In this example, the IP address of the PlayStation is 192.168.20.100
7. Ensure that the box is Ticked (✓) in the Enable field.
8. Ensure that the Use Rule# field is set to (0) Always.
9. Click the Save button.
10. Reboot the modem. (See the last page of the guide for rebooting instructions)
Rebooting the NB16WV
1. In the Advanced View, select the Toolbox menu then click the Reboot option.
2. Click OK when prompted to confirm.
Other NetComm Modem manuals
NetComm
NetComm AM5065 User manual
NetComm
NetComm NB1200 User manual
NetComm
NetComm NB1200 User manual
NetComm
NetComm NB5PLUS4W User manual
NetComm
NetComm NB1300 Technical manual
NetComm
NetComm NB100 User manual
NetComm
NetComm NTC-3000 Series User manual
NetComm
NetComm NCT-1000 User manual
NetComm
NetComm NP7042 User manual
NetComm
NetComm NP5420 User manual
NetComm
NetComm NF18MESH User manual
NetComm
NetComm Vodafone MachineLink 3G User manual
NetComm
NetComm NB16WV-02 User manual
NetComm
NetComm AM5698 User manual
NetComm
NetComm NF18ACV Safety guide
NetComm
NetComm NB4 Manual
NetComm
NetComm AM5056 User manual
NetComm
NetComm NB1300 Plus 4W User manual
NetComm
NetComm NF17ACV User manual
NetComm
NetComm NB16WV-03 User manual
