NEC MultiSync V754Q User manual
1
NEC Display Solutions of America, Inc.
www.necdisplay.com OLR-751
IR Touch Overlay
Installation Guide for the OLR-751 Rev 1.0
1.0 Contents
Guide Purpose Page 1
Notes and Warnings Page 1
Equipment Page 2
Dimensional Drawings Page 2
Installation Procedure Page 3
2.0 Purpose
2.1 This procedure describes the steps to install the IR touch overlay onto the C751Q display.
3.0 Notes and Warnings
3.1 Prior to installing the overlay, remove the NEC badge from the bottom edge of the monitor.
3.2 The overlay contains tempered glass. Use caution when handling.
3.3 The overlay has an integrated USB cable located along the bottom edge of the overlay. Ensure the
cable is not pinched, crushed, or damaged during installation.
3.4 Installation requires two persons at all times to ensure the touch frame does not bend or torque.
3.5 Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen
overlay.
3.6 Contact NEC Display Solutions support if you have any questions or require additional installation
guidance support.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
Phone: (800) 632-4662
3
NEC Display Solutions of America, Inc.
www.necdisplay.com OLR-751
IR Touch Overlay
Installation Guide for the OLR-751 Rev 1.0
6.0 Installation Procedure
6.1 Remove the overlay from the packaging. Place the overlay face down on a padded surface and verify
the material contents (see Equipment on Page 2).
6.2 Use a #2 Philips screwdriver to remove the five (5) #6-32 flathead screws securing the bottom
bracket to the overlay.
6.2.1 Do NOT remove any remaining screws from the overlay.
6.4 Use a cloth and mild cleaner to clean the monitor and inside surface of the overlay.
6.4.1 Do not use any chemical solvents, such as acidic or alkali solutions.
6.4.2 If available, use compressed air after cleaning to remove any lint or dust.
6.3 Remove the bottom bracket from the overlay.
6.3.1 Set the screws and bracket aside for reuse in steps 6.9 and 6.10.
4
www.necdisplay.com OLR-751
NEC Display Solutions of America, Inc.
IR Touch Overlay
Installation Guide for the OLR-751 Rev 1.0
6.5 With the help from at least one partner, gently install the overlay on the monitor.
6.5.1 Hook the top bracket of the overlay on the top of the monitor.
6.5.2 Slide the overlay toward the bottom of the monitor. The sides of the overlay will slide past the
sides of the monitor.
6.5.3 Lower the overlay down to the monitor surface.
Step 6.5.1 Step 6.5.2 Step 6.5.3
6.6 Be sure the USB cable is toward the bottom of the monitor and is not crushed or pinched
during installation.
6.7 Be sure not to scratch or damage the monitor or glass surface while installing the overlay.
6.8 Double check the monitor panel and overlay glass for dirt, smudges, or dust before securing
the overlay to the monitor.
6.9 Return the bottom bracket to its original position.
6.10 Replace the five (5) #6-32 flathead screws to secure the bottom bracket to the overlay.
6.12 Touch overlay hardware installation completed. Attach the USB output cable to your PC or media
player and enjoy your new touch capabilities!
This manual suits for next models
4
Table of contents
Other NEC Monitor manuals
NEC
NEC MultiSync EA243WM User manual
NEC
NEC BT421 User manual
NEC
NEC MultiSync LCD1970NX User manual
NEC
NEC PlasmaSync 42VR5 User manual
NEC
NEC AccuSync LCD72VX User manual
NEC
NEC MD211G3 Operating and safety instructions
NEC
NEC EA273WM-BK User manual
NEC
NEC EA244WMi-BK User manual
NEC
NEC NRP-47CR User manual
NEC
NEC MultiSync M700 User manual
NEC
NEC AccuSync AS173M User manual
NEC
NEC MultiSync EA243WM Parts list manual
NEC
NEC MultiSync V423-DRD User manual
NEC
NEC MultiSync LCD1525S User manual
NEC
NEC MultiSync V463-TM User manual
NEC
NEC 60003811 User manual
NEC
NEC LCD4215 - MultiSync - 42" LCD Flat Panel... User manual
NEC
NEC OLP-554 User manual
NEC
NEC AccuSync LCD174WXM User manual
NEC
NEC MULTEOS Series User manual
