NEC PlasmaSync PX-50XM3A User manual

www.necvisualsystems.com 50XM3 Page 1 of 11

NEC Solutions (America), Inc.

VisualSystems

50XM3 Installation Guide

50” Plasma Display v1.0

Contents

Product Description and Notes Page 1

Ventilation Requirements Page 2

Display Dimensions

Front,Top&Bottom Page 3

Rear, Left & Right Side Page 4

Display Dimensions w/Optional Speakers and Stand Page 5

Dimensions w/Optional Flat Wall Mount Page 6

Dimensions w/Optional Tilt Wall Mount Page 7

Dimensions w/Optional Ceiling Mount Page 8

PortraitMode Page 9

Connections Page 10

Control Codes Page 11

ProductDescription

Type: Plasma Display Screen Surface: Anti-Reflective

Resolution: 1365x768 Dimensions: 48.1”(W) x 29.0”(H) x 3.8”(D)

Aspect Ratio: 16:9 Weight: 96.6 lbs

Color Correction: NEC CCF (Capsulated Color Filter, in panel)

and AccuCrimson (in front filter)

Notes

 This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not

intended to be a step-by step procedure for installation.

 Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local

building codes. All mounts should make secure contact to wood studs.

 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched

horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).

 Distances are in inches, for millimeters multiply by 25.4.

 Distances may vary ±5%.

MaximumTiltAngles

Below are the maximum angles that the display can be tilted in both landscape and portrait mode

Landscape 30°

Portrait 10°

Max Tilt

www.necvisualsystems.com 50XM3 Page 2 of 11

Ventilation Requirements

Dimensions below are minimum required for proper ventilation.

NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the

opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for

design review and recommendations.

WALL

www.necvisualsystems.com 50XM3 Page 3 of 11

Display dimensions

Power Button

Filter Surface

28.98

48.11

43.54 (Screen Area)

24.49 (Screen Area)

Speaker Terminal

Control Buttons

LED & IR

0.217

IR15.20

0.79

2.46 1.46

4.92

18.11 5.94

44.33

25.43

AC Inlet

20.55

50.00

www.necvisualsystems.com 50XM3 Page 4 of 11

Display dimensions (cont.)

Power Button

12°

20.87

3.78

for PC option

4-M4*10 MAX for mount option

8-M4*14 MAX

for speaker option

4.96 2.56 2.56 4.96

13.8813.960.59

0.91

0.216

48.11

1.50 2.28

1.59

0.66

0.405

0.205

25.75

28.98

21.693.64

0.217

0.469

3.90 4.02

10.28 7.91

17.52

4.08

4.21

1.30

1.93

3.07

5.89

7.15

8.25

9.51

10.22

10.93

11.63

12.34

13.13

13.68

14.27

14.86

15.49

16.16

16.89

9.849.84

www.necvisualsystems.com 50XM3 Page 5 of 11

Dimensions with optional speakers and stand

(Screen Area)

28.98

48.11

43.54

24.49

28.98

50.00

3.78

2.80

31.77

32.05

55.24

6.72

15.75

www.necvisualsystems.com 50XM3 Page 6 of 11

Dimensions with optional Flat Wall Mount Kit (FWMK)

Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)

due to a higher center of gravity. (mount pattern is the same)

16.0 4.0

4.0

24.012.0 12.1

11.15.912.0

2.5 3.8

www.necvisualsystems.com 50XM3 Page 7 of 11

Dimensions with optional Tilt Wall Mount Kit (TWMK)

Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)

due to a higher center of gravity. (mount pattern is the same)

16.0

4.0 4.0

24.012.1 12.0

11.15.912.0

5.0 3.8

12.9

Depth at 15° Tilt

www.necvisualsystems.com 50XM3 Page 8 of 11

Dimensions with optional Ceiling Mount Kit (CMK)

Note: The mount holes are 1.14” higher on the 50XM3 than on the 50MP2(PX-50XM2)

due to a higher center of gravity. (mount pattern is the same)

0.23

24.3 23.8

8.0

Tilt Range: 0° - 15°

12.0

Tilt 15°

Tilt 0°

16.016.2 15.9

2.5

1.5

29.015.2

www.necvisualsystems.com 50XM3 Page 9 of 11

Portrait Mode

Rotating the Display

The display must be rotated clockwise so the input panel is at the bottom and vents are at the top.

Rotating the display counter-clockwise will not allow the unit to cool properly and will void the warranty.

Rotating Source Content

Note: The display is not capable of rotating any source content.

Pivot® software from Portrait Displays, Inc. (www.portrait.com) allows you to rotate the Windows operating system 90 degrees. This

software installs in Windows on the PC and allows you to select landscape or rotate 90 degrees to portrait mode. Everything

running in the Windows environment is also rotated.

Note: All displays connected to the PC will have to support rotating to portrait mode.

NTSC Video

NTSC Video has to be brought into a PC with the appropriate hardware and software, and sent back out through the PC graphics

output. The method to rotate the video would then be the same as above and done within the PC Windows environment.

Inputs

Vents

Clockwise

Power

Rotate

www.necvisualsystems.com 50XM3 Page 10 of 11

Connections

VIDEO

(IN/OUT)

VIDEO 1

VIDEO 3

VIDEO 2

AUDIO 1

YCb/PbCr/Pr

DVD 1/HD 1 AUDIO 2

AUDIO 3

Cr/Pr Y Cb/Pb HD VD

RGB 1

(IN/OUT)

RGB 3

DVI

OUTIN

REMOTE

External Control

LOCATED AT

BOTTOM OF DISPLAY

POWER

EXT. SPEAKERS

(MONO) (MONO)

R/ G/ B/

(MONO)

(Digital RGB)

RGB 2/DVD 2/HD 2

This manual suits for next models

Table of contents

Other NEC Monitor manuals

NEC

NEC P50XC10 User manual

NEC

NEC PlasmaSync 42VP4D User manual

NEC

NEC MultiSync EA192M User manual

NEC

NEC LC15m User manual

NEC

NEC MultiSync EA244UHD-BK User manual

NEC

NEC PlasmaSync 42VM5 User manual

NEC

NEC MultiSync E1100+ User manual

NEC

NEC LCD4620 User manual

NEC

NEC LCD6520L-BK-AV - MultiSync - 65" LCD Flat Panel... User manual

NEC

NEC MultiSync C551 User manual

NEC

NEC MultiSync P403 User manual

NEC

NEC MultiSync MD21GS-2MP Product manual

NEC

NEC MD213MC - MultiSync - 21.3" LCD Monitor User manual

NEC

NEC MSERIES User manual

NEC

NEC MultiSync LCD1510 User manual

NEC

NEC LCD2080UX - MultiSync - 20.1" LCD Monitor User manual

NEC

NEC MultiSync LCD1990FX User manual

NEC

NEC MultiSync X464UN User manual

NEC

NEC P1250 - MultiSync Plus - 21" CRT Display User manual

NEC

NEC V191W Parts list manual

NEC

NEC MultiSync EA224WMi User guide

NEC

NEC MultiSync E203Wi User manual

NEC

NEC MultiSync 95F-1 User manual

NEC

NEC LCD1560V - MultiSync - 15" LCD Monitor User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

LG M1950D-PZ owner's manual