Navitar 682MCL012 User manual

Navitar/NuView Series 682 lens on Sanyo PLC – XP100 Projectors.

TOOLS REQUIRED: PHILLIPS HEAD SCREWDRIVER

Disassembly:

1. Disconnect unit from power source and place projector with lens facing you. Remove two

(2) screws from top cover of lens. Remove cover and set aside for reinstallation.

2. Remove prime lens by lifting the lever on the left side of the prime lens and sliding the

lens away from the projector.

Assembly:

1. Ensure that your Navitar lens and its adapter are separate. Position the adapter with the

‘up’ label in the correct position and slide the adapter into the projector ensuring proper

engagement. Rotate the lever counterclockwise until the adapter is securely in place.

2. Replace the front cover of the projector removed in step 2, above.

3. Install the lens by gently rotating clockwise as it is inserted into the adapter.

4. To focus, gently twist the front of lens. To zoom, loosen thumbscrew and twist knurled

ring (zoom lenses only, of course). Re-tighten thumbscrew. CAUTION: Do not twist

entire lens out of adapter!

This manual suits for next models

7

Table of contents

Other Navitar Projector Accessories manuals

Popular Projector Accessories manuals by other brands

Optoma

Optoma BX-AL133B datasheet

PEERLESS

PEERLESS PE 1120 Installation and assembly

Osram

Osram SIRIUS HRI Series Directions for use

Presentation Switchers

Presentation Switchers PS111 quick start

Kramer

Kramer VIA GO user manual

Yamaha

Yamaha PJL-112 Replacement guide

Swedstyle

Swedstyle CL23AA02ZA25E operating manual

Mitsubishi Electric

Mitsubishi Electric 236CB Features

Epson

Epson BrightLink 475Wi user guide

Acer

Acer WP100 quick guide

i3

i3 i3board user manual

CHIEF

CHIEF HB-43E installation instructions

Biamp

Biamp Modena Hub Network administrator's guide

NEC

NEC MP10RX Quick setup guide

Panamorph

Panamorph DCR-S3 installation guide

Exact solutions

Exact solutions FRAME-EVO-P10 manual

CHIEF

CHIEF VCM103S installation instructions

InFocus

InFocus LP70+ Replacement instructions